Who are these monitors for?

Editor working beside a window

You compare recordings from a fixed position where glass and other hard surfaces can affect what you hear. So start by considering the positioning and possible reflections, as Genelec also explains.

Voice or mix editor

You want to assess small differences between takes, such as balance and mid-range frequencies, and are looking for a consistent stereo setup with connections that suit your audio source. Yamaha, PreSonus and KRK product information offers examples of connections and adjustment options to check for each model.

Creator with a small desk

You have limited space for two speakers and need to weigh up their dimensions, your listening distance and how you want to assess bass. Genelec lists the dimensions of the 8010A; also check that two units of any model will fit your workspace.

What should you look for when choosing?

For anyone comparing recordings beside a window, possible priorities include positioning, a consistent listening setup, space for two monitors and how you want to assess bass. Genelec points out that glass and other hard surfaces reflect sound.

What to consider What should you check? Who will find this most important?
Positioning and window reflections Check whether both monitors can be placed at equal distances from your listening position, and angle them towards it. Also assess reflections from glass and other hard surfaces. If I work beside a window, I want to assess the left and right channels from a similar setup. Around 33% of people in this situation prioritise positioning and reflections.
Comparing takes consistently Check that the inputs match the output of your audio interface. Compare recordings using the same monitor settings and listening position. When small differences between takes matter, I don’t want changing settings to cloud my comparison. Around 27% of people in this situation prioritise comparing takes consistently.
Two monitors on a small desk Measure the available space for both monitors and check the dimensions of the exact model. Also check whether the package contains one monitor or a pair. If my desk has limited space, I want to know in advance whether two units will fit side by side. Around 20% of people in this situation prioritise available desk space.
Assessing bass Only compare frequency limits when they use the same measurement basis, such as −3 dB or −6 dB. Assess whether you can hear the bass you want to check from your listening position. If differences in the bass determine my decision, I want to know the measurement conditions behind a stated frequency limit. Around 20% of people in this situation prioritise assessing bass.

Things to look out for when buying

  • Choosing room correction without assessing the position beside the window

    Glass and other hard surfaces can reflect sound. A monitor’s settings won’t automatically eliminate all the effects of the room.

    First, see whether you can position both monitors appropriately and assess where reflections are coming from. Treat a model’s room settings as an adjustment option, not a substitute for assessing the room.

    Changing the positioning or taking an acoustic approach may require extra time or materials.

  • Mistaking a single monitor for a stereo pair

    Yamaha and Genelec list the HS5 and 8010A respectively as single units. The PreSonus Eris Studio 5 mentioned here is the ‘Single’ version.

    Before ordering, check exactly how many monitors are included and what you’ll need for two channels.

    You may need a second monitor for a stereo pair, along with suitable connections and a power supply.

  • Comparing frequency limits directly

    Manufacturers may state frequency limits using different measurement bases. Yamaha lists figures for the HS5 at −10 dB and −3 dB; Genelec gives a lower limit of −6 dB for the 8010A.

    Only compare figures when they use the same measurement basis, and assess whether the bass you want to check will be audible from your listening position.

Brands to consider

Yamaha

The European product information for the HS5 describes an active nearfield monitor with XLR and TRS inputs, plus ROOM CONTROL and HIGH TRIM controls.

  • The controls give you options for adjusting the monitor once it’s in position.
  • The HS5 is packaged individually. Its stated lower limit of 54 Hz is at −10 dB, so it can’t be compared directly with figures using a different measurement basis.

PreSonus

The European product page describes the Eris Studio 5 as having a front port and settings for Acoustic Space, low-frequency cut, mid-range and treble.

  • The settings are designed to let you adjust the monitor to suit its position.
  • The version mentioned is ‘Single’. Room settings don’t prove that reflections from a window or desk will disappear, so check how many monitors are included in the package.

Genelec

Genelec describes the 8010A as a compact active monitor with an XLR input and room compensation switches.

  • The manufacturer lists dimensions of 195 × 121 × 115 mm, including the Iso-Pod.
  • The stated bass limit of 67 Hz is at −6 dB. Check that this measurement basis and the single XLR input suit your needs; the package contains one monitor.

KRK

According to KRK, the ROKIT 5 Generation Five offers three listening modes and adjustment combinations for room and sound.

  • The modes offer different adjustment options for your work.
  • Comparisons between takes will be more consistent if you use the same settings. The quoted specifications and performance claims come from KRK; the product page lists one active monitor.

Neumann

Neumann describes the KH 80 DSP A G EU as a compact nearfield option with DSP and desk-positioning features.

  • The manufacturer lists an Acoustical Control switch for different positions.
  • The optional MA 1 measurement microphone and software are required for more advanced automatic adjustment. Even then, assess the actual positioning beside the window.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I place monitors right beside the window?

Only if you can create a workable listening setup there, preferably a symmetrical one, and assess the effect of glass and other hard surfaces. Glass reflects sound; a room setting doesn’t prove that those reflections will disappear. Also follow the instructions for use and safety guidance for the model you choose.

How should I position two monitors to compare takes?

Point both monitors towards the same listening position and keep them at equal distances from it. ADAM Audio describes an equilateral triangle for stereo setups; Genelec also recommends paying attention to reflections and room compensation. Then compare takes using consistent settings and the same listening position.

Do I need a separate amplifier for active monitors?

An active monitor has its amplifier built in. However, check that the input on each model you choose matches the output of your audio source and that you have the required power supply. A passive monitor requires a suitable separate power amplifier.

Will I get two speakers, and what are my consumer rights?

Not necessarily: Yamaha lists the HS5 and Genelec the 8010A as individual units; the Eris Studio 5 mentioned here is the ‘Single’ version. For a consumer purchase in the Netherlands, the seller must offer a solution under Dutch government guidance if the product doesn’t meet the terms of the agreement. For many eligible online purchases from a business, a 14-day cooling-off period applies; check the terms for the specific purchase.

Which EU safety rules are relevant to an active monitor?

For electrical equipment within the scope of Directive 2014/35/EU, EUR-Lex specifies a designed range of 50–1.000 V AC or 75–1.500 V DC. Check the stated power supply and product documentation for the specific monitor; don’t judge whether it’s suitable for your workspace based only on information about another model or market.