Sound effects editor working beside a window
You want to assess positioning and the stereo image despite reflections from the window. That makes your room and setup part of the decision. Genelec describes glass as a reflective surface.
Start with your setup: glass can reflect sound, and differences between the left and right sides can affect the stereo image. If space is limited, choose a compact desktop system; if you want more flexibility over positioning and calibration, compare separate nearfield monitors. Specifications alone can’t predict how a monitor will sound in your listening position.
You want to assess positioning and the stereo image despite reflections from the window. That makes your room and setup part of the decision. Genelec describes glass as a reflective surface.
You’re looking for a compact pair with connections that suit your computer or audio interface, and you don’t want to place the speakers too close together at random. According to the manufacturer, the ADAM Audio D3V has USB-C and balanced TRS connections.
You also want to assess low frequencies, so you compare the stated bass response with the space available. Bear in mind that frequency limits measured under different conditions can’t be compared directly.
First, check whether you can position both monitors symmetrically in your intended listening position. Then compare connections, calibration and bass response; you’ll ultimately need to assess the latter in your own room.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Positioning and window reflections | Check whether you can place both monitors at the same height and as symmetrically as possible in relation to your listening position. Genelec points out that similar reflections on the left and right are important for an accurate stereo image. | If I’m assessing effects beside a window, I first want to know whether I can position both monitors equally. Around 33% of consumers say positioning and reflections are their main buying concern. |
| Detail and stereo image | Compare the positioning and calibration options. Neumann’s MA 1 Automatic Alignment, for example, requires a suitable measurement microphone and audio interface. | When I’m assessing detail and stereo positioning, I want to know what I’ll actually hear in my listening position. Around 27% of consumers prioritise detail in sound effects and the stereo image. |
| Low frequencies | Compare frequency limits only when they use the same measurement basis, such as −6 dB or −10 dB, and listen in your intended working position. | When working with bass-heavy effects, I want to know whether I can assess low frequencies in my workspace. Around 20% of consumers say bass response is their main consideration. |
| Connections and desk space | Check that the input suits your computer or audio interface and that there’s room for a symmetrical setup. Also check whether the offer includes one speaker or a pair. | If I want to connect a complete set on a small desk, the connections and the number of speakers included need to be right. Around 20% of consumers prioritise connections, space and buying a complete setup. |
Glass reflects sound. Differences between reflections on the left and right can affect the stereo image, as Genelec explains.
First, find out whether you can position the monitors symmetrically, then assess reflections in your actual listening position.
Bax Music’s Dutch product listing describes the ADAM Audio D3V as a two-speaker system, while the T7V, A7V and Genelec models mentioned are sold individually.
Before ordering, check how many speakers are included and what else you’ll need for a complete setup.
If an offer is for one speaker, you may need two for a stereo pair, as well as suitable connections.
A frequency limit at −6 dB uses a different measurement condition from one at −10 dB. Your room also affects what you hear at low frequencies.
Make a note of the dB basis for each specification, and assess bass-heavy effects in your intended listening position.
Neumann’s MA 1 requires, among other things, a suitable measurement microphone and audio interface.
Check the equipment requirements and measurement process before choosing this calibration option.
The measurement setup may require extra equipment, including a measurement microphone and a suitable audio interface.
The D3V is a compact desktop system with USB-C; the T7V and A7V are separate nearfield models with different port and calibration options.
The active 8010A and larger 8030C are separate monitors. Genelec also publishes guidance on positioning and room acoustics.
The active HS series includes the HS5 and HS7, with XLR and TRS inputs.
The ROKIT 5 Generation Five is an active 5-inch monitor with sound and boundary settings.
The KH 120 II supports MA 1 Automatic Alignment for anyone considering a measurement-based setup.
Don’t assume that you can. Genelec describes glass as a reflective surface, so start with positioning and then assess whether calibration helps.
Point both monitors towards your listening position and try to keep the distances, heights and nearby surfaces similar on the left and right. Genelec suggests a 60-degree angle between the monitors as a starting point; check whether this setup will fit on your desk.
It depends on the model’s input and your source’s output. According to ADAM Audio, the D3V has USB-C and analogue TRS inputs; the Genelec 8010A has an analogue XLR input, according to its manufacturer. Check which connection works with your equipment.
Neumann lists, among other things, a suitable MA 1 measurement microphone, a PC or Mac, and an audio interface with a balanced microphone input and 48 V phantom power. Check the full requirements before choosing this measurement process.
Follow the manual for the exact model. ADAM Audio specifies that the stated supply voltage for the D3V must match the power supply being used; switch the system off before connecting or disconnecting cables.