Who are these monitors for?

Producer fine-tuning kick and bass

You want to know whether your decisions about the low end will translate reliably from your listening position. So compare the stated frequency range, including its measurement tolerance, and consider whether you need bass management.

Mixer with a window beside the desk

You need to take the window’s position into account and make the left and right setups as similar as possible. Genelec describes glass as a reflective surface. A curtain can help reduce reflections, but it won’t solve bass problems on its own.

Producer with a small desk

You need space for two monitors and want to know whether an offer includes one speaker or a stereo pair. Also check that the connections are compatible with your audio equipment.

What should you look for when buying?

Start with your listening position and the bass you want to assess. Then check that the pair will fit on your desk and connect to your equipment.

What to consider What to check Who should consider this?
Kick and bass in the low end Compare the lower limit only when it’s given with the same dB tolerance. Also consider whether you need to hear lower frequencies and adjust bass management. If I want to assess kick and bass reliably, I compare the stated range on the same measurement basis. Around 34% of consumers prioritise assessing the low end.
Window reflections and symmetry Consider where you can place the two monitors in relation to the window and your listening position. Room EQ won’t remove reflections from glass. With a window on one side, I want to position the monitors as evenly as possible because glass reflects sound. For around 33% of consumers, the window setup is their main concern when buying.
Desk space Measure the available width and depth, and check the dimensions of each cabinet. Check whether the packaging contains one speaker or a pair. With a small desk, I want to know whether two cabinets will fit and whether I’m buying a pair or individual monitors. Around 20% of consumers prioritise the space available.
Purchase and connections Check how many speakers are included, which cables you’ll need, and whether the inputs match the outputs on your equipment. If I want to connect a stereo pair to my equipment, I check what’s included and the connections before buying. For around 13% of consumers, having everything needed for a compatible connection is the main concern.

Common buying mistakes

  • Comparing lower frequency limits in hertz without checking the dB tolerance

    A stated lower limit doesn’t predict how the bass will sound where you listen. The Yamaha HS7 is specified from 43 Hz at −10 dB, while the ADAM Audio T7V is specified from 39 Hz at −6 dB. These measurements are therefore not on the same basis.

    Compare the full measurement specifications, and assess placement and your need for extra low-end separately.

  • Assuming room EQ will fix reflections from a window

    Glass can cause reflections. A setting that adjusts the speaker response won’t automatically fix every acoustic issue at your listening position.

    First make the setup as symmetrical as possible, then consider whether you need additional acoustic treatment or adjustable EQ.

    Changing your setup or adding acoustic treatment can take time and use up space in your workspace.

  • Mistaking a single monitor for a stereo pair

    Yamaha sells the HS5 and HS7 individually, while Hercules describes the DJMonitor 42 as a set of two. The product title alone doesn’t always make it clear how many speakers are included.

    Check exactly how many speakers are included with the offer and which connections you’ll need.

    If you buy a single monitor, you may need a second speaker and compatible connections to make a stereo pair.

  • Choosing a compact DJ set for deep bass without checking first

    Hercules specifies the DJMonitor 42 from 60 Hz. Without a like-for-like measurement basis and an assessment at your listening position, that lower limit doesn’t prove that you’ll be able to assess the deepest bass in a dance track properly.

    Choose the set for its compact use case, and check separately whether you need an additional low-end reference.

    If you need to assess more low-end later, you may need an additional bass reference or a different monitoring setup.

Brands to compare

Yamaha

The HS series includes active nearfield monitors in different sizes, including the HS5 and HS7.

  • Yamaha lists XLR/TRS inputs and ROOM CONTROL/HIGH TRIM for both models.
  • The HS5 is specified from 54 Hz and the HS7 from 43 Hz, both at −10 dB. These figures alone don’t tell you how the bass will sound in your room.

ADAM Audio

The active 7-inch T7V is a nearfield monitor for anyone who wants to factor in the main monitors’ low-frequency range.

  • ADAM Audio specifies a frequency response from 39 Hz at −6 dB.
  • The T7V has a rear-facing bass reflex port. The stated figure isn’t an independent listening test or a prediction of the bass response beside your window.

KRK

The active 5-inch ROKIT 5 Generation Five offers several listening modes.

  • KRK lists Mix, Focus and Create modes, along with 25 combinations of limiter and EQ settings.
  • These manufacturer features don’t prove that reflections from a window or room modes will be corrected.

JBL Professional

The active 5-inch 305P MkII is a compact monitor with settings to adjust for your listening environment.

  • JBL lists balanced XLR/TRS inputs, Boundary EQ and HF Trim.
  • Boundary EQ is designed to address certain effects from a desk or wall, not to solve every issue caused by window reflections.

Hercules

Hercules describes the DJMonitor 42 as a compact active set of two speakers for DJ and studio use.

  • According to Hercules, the set has an RCA main input, an Aux input, and bass and treble controls.
  • Hercules specifies a range of 60–20,000 Hz without the same dB tolerance used for the HS and T7V models mentioned above. The manual advises keeping this set out of direct sunlight.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a curtain help if I mix beside a window?

A curtain can help reduce reflections from the window, but it won’t solve bass problems on its own. Genelec describes glass as a reflective surface. After making changes, also check that the left and right sides of your setup are still sufficiently symmetrical.

How should I position two monitors for stereo mixing?

Angle both monitors towards your listening position, keeping the distances and heights on the left and right comparable. Genelec recommends a 60-degree angle between the speakers, with the listener ideally at the point of an equilateral triangle. Also follow the placement instructions for your model.

Should I keep a studio monitor out of direct sunlight if it’s beside a sunny window?

For the Hercules DJMonitor 42, the manufacturer’s manual recommends keeping the set out of direct sunlight. Treat this as a model-specific instruction and check the manual for the model you choose.

What should I check before safely buying active monitors in the Netherlands?

For electrical and electronic equipment placed on the market in the Netherlands, the Dutch government outlines the applicable European requirements, including CE marking and an EU Declaration of Conformity. Check the exact version and the product supplied. Information about a model doesn’t confirm the marking of every individual unit.

How do the cooling-off period and warranty work when buying online?

According to the Dutch government, online purchases from a business often come with a 14-day cooling-off period. The Netherlands doesn’t have one fixed statutory warranty period for all products. You’re entitled to a product that works as it should, and the seller is your point of contact if something is faulty. Check the terms that apply to your order.