Who is this choice for?

Producer working beside a window

You mix in a fixed spot beside a glass window and want to know whether a symmetrical stereo setup is possible before choosing a model, and how to account for reflections. Genelec describes glass as a hard, reflective surface.

Producer of bass-heavy tracks

You want to assess kick and bass, and are weighing up compact speakers against extra bass extension and the space and calibration it may require. ADAM Audio and Genelec describe additional subwoofer systems for certain monitor setups.

Producer with a small desk

You’re looking for a stereo pair that fits your workspace and want to check in advance how much room you’ll need and which connections are required. Yamaha lists the HS5 as a single speaker; PreSonus offers the Eris 3.5 2nd Gen as a pair.

What should you look for when buying?

What to consider What to look for when buying Who is this important for?
Placement and window reflections Check whether both monitors can be placed symmetrically in relation to your listening position and angled towards your ears. Genelec recommends a 60° angle between the monitors, with the listener ideally at the point of an equilateral triangle. If I mix beside glass, I want to know whether I can place the left and right monitors at similar distances and account for reflections. Around 31% of consumers put placement and window reflections at the top of their list when buying.
Assessing kick and bass Only compare frequency ranges when the measurement basis is clear, and assess the low end at your own listening position. A stated lower limit alone doesn’t guarantee reliable assessment of deep sub-bass. If kick and bass are at the heart of my track, I want to know what I can really assess at my listening position and whether I need a second way to monitor the sound. Around 31% of consumers put control over kick and bass first.
Size and workspace Measure the space available for two cabinets and take account of the placement instructions for your chosen model, including the clearance behind a monitor with a rear bass-reflex port. With a small desk, I want to fit a stereo pair without losing the symmetry around my listening position. Around 19% of consumers say a suitable size for two cabinets is their top priority when buying.
Connections and pack size Check that the inputs are compatible with your equipment and whether the offer includes one monitor or a pair. Yamaha lists XLR and TRS inputs for the HS5 and sells it individually; PreSonus lists TRS, RCA and stereo mini-jack inputs for the Eris 3.5 2nd Gen, which is offered as a pair. If I want to mix in stereo straight away, I want to know in advance whether I’ll get both speakers and suitable connections. Around 19% of consumers put a complete, ready-to-connect set at the top of their list when buying.

Pitfalls when buying studio monitors

  • Comparing prices without checking how many speakers are included

    An offer for one monitor isn’t the same as an offer for a stereo pair. Yamaha lists the HS5 as a single speaker, while the PreSonus Eris 3.5 2nd Gen is offered as a pair.

    Before buying, check how many speakers are included and what cables you’ll need for your setup.

  • Taking a frequency figure as proof of bass performance

    Published frequency ranges may be based on different measurements. Your room and listening position also affect how you hear the low end.

    Compare frequency figures alongside their stated measurement basis, then assess the low end once the monitors are set up at your listening position.

  • Treating room EQ as a substitute for good placement

    Glass can reflect sound. Monitor settings won’t automatically remove these reflections or resolve every problem in your listening room.

    First work out where a symmetrical setup is possible, then consider which settings are useful for your chosen model.

Brands to consider

Yamaha

The HS series is an option if you’re looking for individual active nearfield monitors with analogue XLR and TRS inputs and adjustable room controls.

  • Yamaha lists ROOM CONTROL and HIGH TRIM for the HS5, which is sold individually.
  • The stated lower limit of 54 Hz is measured at −10 dB. That figure alone doesn’t predict how deep the bass will sound at your listening position. Remember, too, that you’ll need two monitors for stereo.

ADAM Audio

The T5V is an active nearfield monitor with a rear bass-reflex port. The manufacturer names the T10S as a possible addition for extra bass extension.

  • ADAM Audio states that the T5V has a frequency range starting at 45 Hz at −6 dB.
  • The rear bass-reflex port means you’ll need to consider the space behind the cabinet when positioning it. The stated frequency response doesn’t guarantee bass performance that will suit every room.

KRK

The ROKIT 5 Generation Five is worth considering if you want to switch between voicing settings on the monitor and adjust its sound.

  • KRK lists Mix, Focus and Create modes, along with 25 tuning combinations.
  • These settings don’t prove that window reflections or room-mode issues in your workspace will be resolved. The packaging shown by KRK contains one monitor.

PreSonus

The Eris 3.5 2nd Gen is a compact set for a small workspace and is offered as a pair.

  • PreSonus lists TRS, RCA and stereo mini-jack inputs, with a frequency range of 80 Hz to 20 kHz.
  • The stated specifications alone don’t support a reliable assessment of deep sub-bass at your listening position.

Genelec

The 8030C is a compact active monitor with room-compensation switches. Genelec also describes an 8030/7050 setup for extra bass extension.

  • Genelec lists the 8030C’s dimensions as 299 × 189 × 178 mm, including the Iso-Pod.
  • The 8030C packaging contains one monitor. Additional equipment doesn’t remove the need for suitable placement and calibration.

Joybuy products

Related products coming soon.

Frequently asked questions

Will different studio monitors help with reflections from a window?

Not by themselves: glass reflects sound, so start with suitable placement and assess the reflections at your listening position. Genelec mentions heavy curtains as an absorbent material and notes that a thick layer is needed to absorb low frequencies.

How should I position a stereo pair?

Angle both monitors towards your listening position and aim for a symmetrical setup. Genelec recommends a 60° angle between the monitors for music production, with the listener ideally at the point of an equilateral triangle. Also follow the instructions for your chosen model.

Do I need a subwoofer straight away for an electronic track?

Not necessarily: first assess what your current monitors let you hear at your listening position and how the room affects the low end. If you need extra bass extension, ADAM Audio names the T10S as an addition to the T5V, while Genelec describes an 8030/7050 system. Setups like these need suitable placement and calibration.

How can I avoid buying one monitor when I need a stereo pair?

Check the specific offer to see whether the packaging contains one speaker or a pair. Yamaha lists the HS5 as a single speaker; PreSonus offers the Eris 3.5 2nd Gen as a pair.

Which connections should I check?

Compare the output from your computer, audio interface or other source with the inputs on the exact monitor model. Yamaha lists XLR and TRS inputs for the HS5; PreSonus lists TRS, RCA and stereo mini-jack for the Eris 3.5 2nd Gen.