Who are these studio monitors for?

Editor working next to a window

You want to assess the positioning and stereo image of guitar tracks, but a nearby window may affect each side of your listening setup differently. Genelec describes glass as a reflective surface and stresses the importance of having similar reflections on the left and right.

Detail-focused guitar mixer

You compare subtle tonal and editing differences, and want to assess the effect of the room. Product specifications alone can’t prove that you’ll hear those differences.

Musician with a small desk

You need enough space for two monitors and suitable connections, without being forced to position them unevenly. Measure the space available and check that your audio interface is compatible with the inputs on your chosen model.

Which buying considerations deserve your attention?

First, check whether you can position both monitors in a similar way relative to your listening position. Then compare the connections, adjustment options and specifications that suit your guitar editing needs.

What to consider What should you look for? Who is this important for?
Window reflections and stereo image Check whether you can position both monitors symmetrically, and listen to see whether reflections are similar on the left and right. If I edit guitar tracks next to a window, I want to know whether the listening setup affects the stereo image. Around 36% of consumers prioritise window reflections and positioning.
Detail when editing guitar tracks Compare the adjustment options and assess models from the same listening position. Frequency limits measured using different dB reference points aren’t directly comparable. If you want to assess subtle changes in a guitar track, focus on how the room and adjustments affect what you hear. Around 29% of consumers give editing and tonal detail top priority.
Desk space and connections Measure the space available for two monitors and match the inputs to the outputs on your audio interface. Also check whether the offer includes one monitor or a pair. If I want to position a stereo pair on a small desk, I need room for both speakers and compatible connections. Around 21% of consumers start by considering available space and connections.
Low-frequency range and complete setup Only compare frequency ranges when they use the same measurement reference, and check how many monitors are included and whether you’ll need anything else for adjustment. If you also want to assess the lower frequencies in a mix, weigh this against the space available and what’s included in the set. Around 14% of consumers prioritise low-frequency range and the cost of a complete setup.

Which mistakes can you avoid?

  • Assuming a room setting will fix the window problem

    Glass can reflect sound. Genelec points out that calibration doesn’t necessarily solve every problem caused by the room.

    First, try to create a setup that’s as symmetrical as possible, then decide whether you need further adjustments.

  • Mistaking a single monitor for a stereo pair

    An offer may include just one speaker, even though you need two monitors for a stereo pair.

    Check the number of speakers, the inputs and what’s included in the offer before putting together your setup.

    You may need a second monitor and suitable cables or positioning equipment to complete your setup.

  • Comparing frequency limits without checking the measurement reference

    Yamaha gives different lower limits for the HS5 at −10 dB and −3 dB. A lower figure without the same measurement reference doesn’t prove that the usable low end is better.

    Only compare figures when they use the same measurement reference, and assess the low end from your own listening position.

  • Assuming DSP is a complete room-measurement solution

    Neumann’s MA 1 calibration requires additional equipment and a compatible computer. Calibration doesn’t automatically eliminate reflections in the room.

    Before choosing, check what equipment you already have and which calibration method you want to use.

    MA 1 calibration may require a measurement microphone, a compatible audio interface and a computer.

Which brands are worth comparing?

Genelec

The 8020D is a compact active nearfield monitor to consider when space for positioning is limited.

  • Genelec lists the 8020D’s dimensions as 242 × 148 × 142 mm, including the Iso-Pod, and its frequency range as 56 Hz–25 kHz at −6 dB.
  • A compact cabinet won’t eliminate the effect of a window or an uneven setup.

Neumann

The KH 80 DSP offers positioning adjustments and support for optional measurement-based calibration.

  • Neumann lists a switch for options including desk placement, as well as support for MA 1.
  • MA 1 requires additional measurement and connection equipment; calibration won’t automatically eliminate window reflections.

Yamaha

The HS5 is an active 5-inch monitor with manual ROOM CONTROL and HIGH TRIM settings.

  • Yamaha lists XLR and TRS connections, and gives the frequency response at both −10 dB and −3 dB.
  • Check the measurement reference used for the frequency figures and whether the offer includes one monitor or a pair.

ADAM Audio

The T5V is an active 5-inch nearfield monitor with a U-ART tweeter.

  • The model has a rear-facing bass reflex port.
  • Check the space behind the monitor and whether the inputs on the version offered are compatible with your equipment.

Kali Audio

The LP-6 V2 is a larger 6.5-inch option to compare if you have enough space to position it.

  • The model information lists a front-facing bass reflex port and RCA, TRS and XLR inputs.
  • The larger cabinet needs more space, and a front-facing port won’t eliminate the effect of the room or listening position.

Joybuy products

Related products coming soon.

Frequently asked questions

Does bright daylight mean you need a particular studio monitor?

No, the brightness of the light alone doesn’t determine which speakers you need. However, treat the window as a reflective surface and see whether you can make your listening setup symmetrical. Follow the instruction manual for a specific device if it’s exposed to direct sunlight.

How should I position a stereo pair for editing guitar tracks?

Genelec advises pointing the monitors towards your listening position, arranging them as symmetrically as possible on the left and right, and setting them at a 60° angle to each other for music. Then assess the room, especially if there’s a window on only one side.

Can I calibrate the KH 80 DSP with MA 1 without extra equipment?

No. For MA 1, Neumann lists equipment including an MA 1 measurement microphone, a compatible audio interface with a microphone input and 48 V phantom power, and a computer.

Am I automatically entitled to a two-year legal guarantee in the Netherlands?

No, according to the Dutch government, the Netherlands doesn’t have a fixed statutory guarantee period. You’re entitled to a product that works properly for as long as you can reasonably expect it to; if there’s a problem, contact the seller. A manufacturer’s guarantee or additional cover is on top of your statutory rights.

What rules apply when buying active monitors online?

For electrical appliances sold in the Netherlands, Ondernemersplein outlines European safety requirements and manufacturers’ obligations regarding CE marking and the EU Declaration of Conformity. For online consumer purchases from a business, the Dutch government generally states that you have 14 days to change your mind; check the terms that apply to your specific purchase.