Who is this choice relevant to?

Editor working next to a window

You’re judging the stereo positioning of a live recording, with a reflective window on one side. For you, symmetrical positioning and reducing early reflections matter more than extra speaker features. Genelec describes glass as a reflective surface and emphasises the importance of your listening setup.

Editor working with speech and detail

You want to assess voices and subtle audible differences from a fixed listening position. Neumann stresses that your choice of nearfield monitors should suit your room, listening distance and workflow.

Editor with a small desk

You need space for two monitors and want to know in advance which connections and calibration components are included with the model you choose. Also check whether an offer includes one speaker or a pair.

What should you look for?

What to consider What should you check? Who is this most important for?
Stereo image with window reflections Check whether both monitors can be positioned at the same distance and height, facing your listening position. See whether you can arrange the reflective side differently. If I need to judge the stereo positioning of a live recording next to a window, I want to listen with the left and right sides as symmetrical as possible. Around 33% of consumers prioritise a reliable stereo image.
Detail at a short listening distance Compare each model’s intended use and listening distance, then check the setup from your own workstation. When I want to assess voices and subtle differences from my desk, the monitor needs to suit my listening distance and room. Around 27% of consumers prioritise this level of detail.
Bass and measurement figures For each frequency limit, note the corresponding dB measurement point. Assess the bass from your own listening position. If I want to assess the bass in a live recording, I want to compare frequency figures measured on the same basis. Around 20% of consumers prioritise bass performance.
Connections and what’s included Check the number of monitors, inputs, cables required and which calibration components are included with the model. I want to connect a stereo system to my existing editing equipment and know in advance what’s in the box. Around 20% of consumers place the greatest importance on getting a suitable, complete set.

Buying pitfalls

  • Assuming calibration will solve window reflections

    Glass can reflect sound. Genelec warns that calibration doesn’t solve every acoustic problem in a room.

    First, find the most symmetrical speaker and listening positions you can. Then check which calibration components are included with the model you’ve chosen.

    According to Genelec, GLM calibration for the Genelec 8330A requires hardware sold separately.

  • Assuming one monitor is a stereo pair

    The Yamaha HS5 is packaged individually, and Genelec lists one 8330A per package. So one monitor isn’t automatically a complete stereo set.

    Before you buy, check the pack size and whether you need two speakers for your setup.

    You may need a second speaker for a stereo set.

  • Comparing frequency limits measured on different bases

    Yamaha lists the HS5’s frequency limits at −10 dB and −3 dB, while ADAM Audio gives a figure for the T5V at −6 dB. These are not directly comparable measurement points. Your listening room also plays a part.

    Only compare figures with the same dB measurement point, and assess the bass from your own listening position.

Relevant brands

Genelec

The 8330A SAM is a compact active monitor for anyone considering GLM calibration in a challenging listening room.

  • Genelec lists GLM support for the 8330A.
  • According to Genelec, calibration requires hardware available separately. The manufacturer warns that calibration doesn’t solve every acoustic problem.

Neumann

According to Neumann, the compact KH 80 DSP is designed for applications including editing and broadcast rooms, and offers settings to adapt it to its position.

  • Neumann mentions automatic tuning of a stereo system using the optional MA 1 measurement microphone and software.
  • Neumann points out that the room also affects the listening experience.

Yamaha

The HS5 is an active nearfield monitor for anyone looking for manual ROOM CONTROL and HIGH TRIM settings.

  • Yamaha lists XLR and TRS inputs.
  • The HS5 is packaged individually. Yamaha gives frequency limits of 54 Hz at −10 dB and 74 Hz at −3 dB; don’t compare these measurement points directly with a figure at −6 dB.

IK Multimedia

The pair version of the iLoud MTM MKII is worth considering for a compact stereo desk setup where built-in calibration is a priority.

  • According to IK Multimedia, the pair version includes an ARC measurement microphone.
  • The manufacturer says the measurement microphone is included only with the pair version or immersive bundle. Check which version you’re buying; the product specifications alone can’t tell you how the set will sound next to a window.

ADAM Audio

The T5V is a compact active nearfield monitor for small control rooms and editing work.

  • ADAM Audio lists a 5-inch woofer and a rear-facing bass reflex port.
  • The stated lower limit of 45 Hz is at −6 dB. When positioning the monitor, take its rear-facing port and your room into account.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Do you need to cover the window before choosing monitors?

No, it isn’t a general requirement when choosing monitors. Genelec describes glass as a reflective surface and emphasises symmetrical positioning and reducing early reflections. First, work out where your monitors and listening position can go. An absorbent curtain could be part of the setup, but calibration doesn’t fully replace acoustic treatment.

How should you position two monitors for stereo editing?

Genelec recommends an angle of 60° between the monitors, with the listener ideally at the point of an equilateral triangle. Point both monitors towards your listening position and aim for symmetry between the left and right sides.

Does every monitor with calibration include a measurement microphone?

No, it depends on the model and version. According to Genelec, GLM calibration for the Genelec 8330A requires components sold separately. IK Multimedia says the ARC measurement microphone is included only with the pair version and immersive bundle of the iLoud MTM MKII. Check the exact version and what’s in the box.

Can you directly compare the lower frequency limits of monitors?

Only if they’re measured on the same basis. Yamaha lists figures for the HS5 at −10 dB and −3 dB, while ADAM Audio gives a figure for the T5V at −6 dB. So compare the same dB measurement points, and bear in mind that your listening room affects what you hear.