What should you look for when buying?
First, make sure you can repeat your playback level and find a suitable position for both speakers. Then consider the room settings, connections and pack size.
| What to consider |
What to check before buying |
Consumers |
| Comparable listening level |
Keep the playback setting the same and, if needed, measure the signal’s loudness separately. EBU R 128 covers normalisation in a broadcasting context. |
If I want to assess takes or masters without mistaking a change in volume for a difference in quality, I prioritise a fixed playback setting; around 36% of consumers put level matching first. |
| Window reflections and positioning |
First decide where to place both speakers and your listening position; then consider any room settings. They won’t automatically solve reflections from glass. |
If my listening position is next to a window, I want to account for positioning and reflections before relying on adjustments; around 29% of consumers prioritise window acoustics. |
| Space and connections |
Check that you have room for two speakers, and compare the inputs on the exact model with the outputs on your audio source. Yamaha lists XLR and TRS inputs for the HS5; Genelec lists one analogue XLR input for the 8010A. |
If space is tight on my desk, I want to make sure two monitors will fit and connect to my source; around 21% of consumers prioritise fit and connections. |
| Complete stereo setup |
Check whether the deal includes one monitor or two, and which cables you need for your source. The versions mentioned from PreSonus, Yamaha and Genelec, among others, are sold individually. |
If I need a complete stereo setup, I want to avoid ordering just one speaker; around 14% of consumers prioritise a complete order. |
Joybuy products
Related products will be available soon.
Frequently asked questions
Do studio monitors automatically make recordings equally loud?
No. Keep your listening setting the same and, if needed, use a separate loudness meter to compare signals. EBU R 128 covers loudness and normalisation for broadcast material; it isn’t a general Dutch requirement for private recordings.
Can a room setting help with reflections from a window?
A room setting gives you an adjustment option, but it won’t automatically solve reflections. Genelec describes glass as a reflective surface and notes that calibration alone may not be enough to address every acoustic problem. Start with positioning, then assess the result from your listening position.
What should I check about connections and use?
Compare the inputs on the exact monitor model with the outputs on your audio source. Also follow the model-specific safety instructions: for the HS series, Yamaha advises keeping ventilation openings clear and not placing the monitors near heat sources, among other things.
What if a speaker develops a fault or I change my mind after buying online?
For a consumer purchase in the Netherlands, the seller is your point of contact for your statutory guarantee rights; any manufacturer’s warranty is in addition to these. For distance purchases, the Dutch government says you usually have a 14-day cooling-off period, depending on the specific purchase.
Which EU electrical safety rules are relevant?
According to EUR-Lex, the EU Low Voltage Directive applies to equipment designed for 50–1.000 V AC or 75–1.500 V DC. Within this scope, EUR-Lex describes requirements including CE marking and an EU declaration of conformity. Check the specified power range and conformity information for the exact model; a model name alone doesn’t show that an individual unit complies with the rules.