Who are these monitors for?

Voice editor with a small desk

You edit spoken intros close to your screen and want to position both speakers equally. Genelec recommends a symmetrical listening setup.

Editor with an existing audio interface

You want to connect the monitors to the outputs you already use. Check which inputs and cables are compatible with your equipment.

Editor without a separate playback interface

You’re looking for a simple way to listen back to audio from your computer. A playback connection won’t automatically take care of recording through your microphone, too.

What should you look for?

First compare the placement and connections of the complete setup, then decide which option suits your desk and how you want to play audio.

Compact analogue stereo pair

A good fit if: you’re short on desk space and your computer or interface has suitable analogue outputs.

Keep in mind: compare the connections and check that both speakers can be positioned equally; specifications alone don’t prove a difference in accuracy.

System with USB-C playback

A good fit if: you want to play audio directly from a computer via USB-C. ADAM Audio lists this connection for the D3V.

Keep in mind: USB-C playback doesn’t mean your microphone recording is taken care of as well; check your recording chain separately.

Two separate nearfield monitors

A good fit if: you have room to position two monitors evenly and have suitable monitor outputs.

Keep in mind: the Genelec 8010A has one analogue XLR input per monitor; you need two monitors for stereo.

The table sets out the main buying considerations for consumers looking for studio monitors to edit spoken introductions at a home workstation.

What to consider What to look for Who this matters to
Assessing vocal detail Check that both speakers can point towards your listening position from the same height and distance; listen to your edit on another playback system, too. If I want to assess spoken details and transitions from my usual listening position, this comes first for me; around 36% of consumers say assessing vocal detail is their main reason for buying.
Desk space Measure the available width, depth and height on both sides, and check the space behind the speakers, too. If my desk is full or shallow, I want to be able to position two monitors comfortably; around 29% of consumers prioritise the space available on their desk.
Connecting to existing equipment Note the outputs on your computer or interface and compare them with the inputs on the exact model, such as USB-C, TRS, XLR, RCA or 3,5 mm. If I want to keep using my existing computer or audio interface, I want to know in advance which cable and input will work; around 21% of consumers prioritise this connection.
Complete stereo setup Check whether you’re buying a pair or a single monitor, what’s included and which cables you’ll need for both channels. If I want to see the full stereo setup at a glance, I look at the items included and the connections required; around 14% of consumers say a complete setup is their main reason for buying.

Things to watch out for when buying

  • Assuming the price of one monitor covers a stereo pair

    The Genelec 8010A is a single monitor, while Yamaha specifies the HS3 as a pair. What’s included in a listing therefore affects what else you’ll need.

    Check whether the listing is for one monitor or a pair, and what’s included, before comparing the cost of a complete setup.

  • Comparing frequency ranges measured on different bases

    Genelec gives the 8010A a lower limit of 67 Hz at −6 dB. IK Multimedia lists 45 Hz at −10 dB for the iLoud Micro Monitor; these measurement limits aren’t directly comparable.

    Only compare frequency ranges when they’re measured on the same basis, and bear in mind how you’ll position the monitors in your room.

  • Using Bluetooth without checking when editing to picture

    In a test using an iPhone 6S with iOS 10.0.1, IK Multimedia reports system latency of 1,02 ms via analogue and 155 ms via Bluetooth for the iLoud Micro Monitor. These test results won’t necessarily apply to every computer.

    For time-critical listening, use a suitable wired connection and check synchronisation in your own editing software.

  • Applying a ranking to a different model generation

    Home DJ Studio ranked the PreSonus Eris 3.5 first in a budget monitor comparison dated 6 June 2026, but didn’t specify the generation. The Eris 3.5 2nd Gen mentioned here isn’t necessarily the same version as the model that was reviewed.

    Check the full model name, generation and specifications in the listing before applying the ranking to a specific model.

Brands to consider

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a compact analogue stereo pair for uses including home studios and video work.

  • The manufacturer lists balanced TRS, unbalanced RCA and 3,5mm inputs, as well as a headphone output on the front.
  • The stated frequency response of 80 Hz–20 kHz has no comparable tolerance in the cited specification. Don’t use this figure to rank bass performance against models measured differently.

Yamaha

The European specifications describe the HS3 and HS4 as compact monitor pairs with analogue inputs and placement controls.

  • For the HS3, Yamaha lists XLR/TRS combo connections, RCA and a stereo mini-jack input, plus ROOM CONTROL and HIGH TRIM.
  • HS3 specifications don’t automatically apply to other models in the range. Check the dimensions and connections of the model you choose.

ADAM Audio

ADAM Audio describes the D3V as an active desktop stereo system with USB-C playback and balanced analogue connections.

  • The manufacturer lists USB-C, two TRS inputs and detachable feet. ADAM Audio says USB-C can remove the need for a separate playback interface.
  • This relates to playback; it doesn’t mean microphone recording is handled through the same connection.

Genelec

Genelec describes the 8010A as a single active nearfield monitor for setups with suitable XLR outputs.

  • Genelec lists a width of 121 mm with Iso-Pod, one analogue XLR input and room response controls. You need two monitors for stereo.
  • The stated lower limit of 67 Hz is at −6 dB and isn’t directly comparable with a frequency figure measured at a different tolerance.

IK Multimedia

IK Multimedia describes the iLoud Micro Monitor as a compact stereo system with analogue inputs and Bluetooth as an additional playback option.

  • The manufacturer lists two speakers and connecting cables in the box, alongside RCA and 3,5mm connections.
  • In a test setup described by IK Multimedia, system latency measured 1,02 ms via analogue and 155 ms via Bluetooth. These figures depend on the test setup and won’t necessarily apply to every computer.

Pioneer DJ

Pioneer DJ describes the DM-40D as a desktop monitor system with a switch between DJ and production modes.

  • The manufacturer lists RCA and mini-jack inputs, with controls on the front.
  • The two modes don’t, in themselves, provide independent proof of accuracy when editing voices.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors by my editing screen?

Position them symmetrically, at the same distance and height, and angle them towards your listening position. Genelec recommends an equilateral triangle as an ideal starting point; walls and other surfaces affect what you hear.

Can I connect a monitor directly to my computer?

That depends on the model and your computer’s outputs. ADAM Audio says the D3V can play audio from a computer via USB-C; for an analogue connection, you’ll need a suitable output and cable. This won’t automatically provide a connection for your recording microphone.

What do the cooling-off period and warranty mean when buying online in the Netherlands?

According to the Dutch government, when you buy online from a business, you generally have 14 days to change your mind, although there are exceptions. ACM ConsuWijzer explains that the seller is also responsible under the legal guarantee if a product, when used normally, doesn’t do what you could reasonably expect. Don’t assume there’s one fixed statutory warranty period for every monitor.

Which product regulations apply to monitors sold in the Netherlands?

The Dutch government describes CE marking as a declaration by the manufacturer that the relevant EU product rules have been met; CE marking isn’t a quality mark for sound. For a version with radio functionality, such as Bluetooth, the European Commission also sets out the framework of the Radio Equipment Directive. Check the documentation for the specific product.