Who are these monitors for?

Editor using two screens

You want to position two speakers around your screens without an uneven setup. Measure the available width and height, and watch out for reflections from the screens; Genelec lists computer screens as reflective surfaces.

Editor assessing speech

You edit spoken-word intros from a fixed workstation and want to take the listening position and reflections into account when assessing the audio. Genelec recommends symmetrical stereo positioning and lists screens as potential reflective surfaces.

Editor looking for a straightforward connection

You want to connect the monitors to your computer or audio interface outputs and check whether the box contains a complete stereo pair. Connections and box contents vary by model.

What should you look for?

First, measure whether two monitors will fit symmetrically beside your screens. Then check the connections and whether you’re buying a pair or a single monitor.

What to consider What should you check? Who is this important for?
Positioning beside two screens Measure the available width, depth and height, including the stand or support. Check that both monitors can be aimed towards your listening position from the same distance and height. If there’s little room beside your screens, you’ll want to know whether a symmetrical setup is possible. Around 33% of consumers say positioning is their main consideration.
Assessing speech while listening Check whether you can create an even listening setup, and listen from your usual editing position. Don’t assume that positioning controls will eliminate reflections. If you assess speech from one fixed position, you’ll want to know how your screens and room might affect what you hear. For around 27% of consumers, this is the main consideration.
Connecting to your editing setup Compare your computer or interface outputs with the monitor inputs, and check which cables you’ll need. For USB-C, check the playback resolution too. If you want a straightforward connection without extra adaptors, start with the outputs you already use. Around 20% of consumers say connectivity is their top priority.
Complete stereo pair Check whether the box contains one monitor or a pair, and see which power supplies and connecting cables are included. If you want to set up left and right audio straight away, you’ll want to know what’s in the box first. A complete pair is the main consideration for around 20% of consumers.

Common mistakes

  • Assuming a single monitor is a stereo pair

    The Genelec 8010A is listed as one monitor per box, while PreSonus sells the Eris 3.5 2nd Gen as a pair. That makes a difference when you’re setting up left and right audio.

    If a model is sold individually, you’ll need a second monitor for stereo. Check which cables you’ll need for the complete setup too.

    Compare the pack size and what you’ll need for both left and right before choosing a model.

  • Thinking of two screens only as a space issue

    Screens can reflect sound. According to Genelec, positioning and your listening position also matter when assessing stereo.

    Draw your screens, monitors and listening position to scale, then check the setup on your desk. Listen from your usual editing position afterwards.

  • Treating similar model names as the same version

    Products with similar iLoud names may have different connections. The current product information for the iLoud Micro Monitor lists XLR and RCA inputs; check the exact version.

    Before ordering, compare the full model name, connections and box contents with the specific product listing.

Brands to consider

ADAM Audio

The D3V is an active stereo pair designed for desktop use. ADAM Audio says the model has USB-C, two balanced TRS inputs and detachable stands.

  • The manufacturer lists positioning controls and a USB-C connection.
  • According to ADAM Audio, internal processing via USB operates at 48 kHz/16 bit; check that this playback route meets your requirements.

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a pair, with analogue connections.

  • The manufacturer lists TRS, RCA and 3.5 mm inputs, plus a headphone output.
  • The connections alone don’t tell you how well a model will suit your room or voice-editing setup.

Genelec

Genelec describes the compact 8010A as an active monitor sold individually, with an analogue XLR input.

  • Genelec lists a width of 121 mm including the Iso-Pod, as well as positioning compensation.
  • The box contains one monitor, so you’ll need two for stereo. The stated lower limit of 67 Hz is at −6 dB, so it isn’t directly comparable with figures measured differently.

IK Multimedia

IK Multimedia’s current product information describes the iLoud Micro Monitor as a compact stereo pair with XLR and RCA inputs.

  • The manufacturer gives dimensions of 99 × 136 × 165 mm for each speaker.
  • Check the full model name and version: older listings or products with different names may show different specifications.

Joybuy products

Related products coming soon.

Frequently asked questions

Where should you place two monitors when working with two screens?

Try to position both monitors at the same height and distance from your listening position, and angle them towards it. Genelec recommends a 60° angle at the listening position for stereo; screens can reflect sound. Measure your desk and screen setup before choosing a model.

Can you connect the ADAM Audio D3V directly to your computer?

According to ADAM Audio, the D3V has a USB-C input and two balanced TRS inputs. Check that your computer has the required connection. ADAM Audio lists internal processing via USB at 48 kHz/16 bit, so files with a higher resolution won’t play at their original resolution via this route.

What should you check after setting up your monitors?

Listen from your usual editing position and check that both monitors are angled the same way, and whether the screens or desk cause unwanted reflections. If necessary, move the monitors, then assess the effect of any positioning controls.

Should you buy one speaker or a stereo pair?

It depends on what’s in the box for the exact model. Genelec describes the 8010A as one monitor per box; PreSonus describes the Eris 3.5 2nd Gen as a pair. Check the power supply and cables too before comparing what you’ll need for a stereo setup.

Does a CE mark prove that a monitor is suitable for voice editing?

No. According to the European Union, CE marking relates to applicable product rules, not suitability for voice editing or how a product sounds in your workspace. The rules that apply depend on the product and the relevant requirements.