Who is this choice relevant to?

Mixing engineer with a narrow desk

You need to fit two speakers around one listening position without an uneven setup compromising the stereo image. Genelec explains how symmetrical positioning keeps the listening position centred; also check that your desk really has enough room for both speakers.

Vocal mixer with a fixed listening position

You want to assess the placement of vocal parts in relation to one another, so a consistently positioned left and right speaker is useful. Product specifications alone can’t predict how a model will sound in your room.

Producer with an existing audio interface

You want to know whether your interface outputs are compatible with the inputs on a set or two separate monitors, and whether you’ll need a second speaker or suitable cables. Check the connections on the exact model before making your choice.

What should you look for when buying?

Compact active stereo set

A good fit if: you have limited desk space and want a set whose connections and speaker-to-speaker link are compatible with your audio source. ADAM Audio lists USB-C and balanced TRS for the D3V; the original IK Multimedia iLoud Micro Monitor has analogue inputs and is supplied as a pair.

Bear in mind: USB-C isn’t available on every compact set, and low-frequency figures are only comparable when the stated dB limit is also the same.

Desk set with positioning settings

A good fit if: you need to position your speakers close to a wall or on a desk. Kali Audio describes the LP-UNF as having settings for different desk and wall positions.

Bear in mind: these settings are no substitute for positioning the left and right speakers as suitably and symmetrically as possible.

Two separate active monitors

A good fit if: you can position both speakers separately and your audio interface or other source has suitable stereo outputs. According to the manufacturer, Genelec sells the 8010A individually.

Bear in mind: check whether you need two units and suitable cables; a single monitor isn’t a stereo set on its own.

The main buying considerations here are space for a stereo pair, assessing vocal layers, the effect of your desk and walls, and connecting a complete set.

Consideration What to look for when buying Who is this for?
Positioning two speakers Measure the space available for both speakers and check whether you can point them towards your listening position from a similar height and distance. I need to fit two speakers on a narrow desk and want to position them similarly from my fixed listening position. Around 36% of consumers put positioning first.
Assessing vocal layers Check that you can connect a left and right channel and listen to the mix from one fixed position. I want to assess the balance and stereo placement of vocal parts from the same position. This is a priority for around 29% of consumers who put vocal balance first.
Desk and wall Check where both speakers will sit in relation to your desk and the wall, and whether the model has settings for that positioning. If my desk is close to a wall, I want to know what setup is possible and what I can adjust. Around 21% of consumers put the effect of their desk and walls first.
Connections and what’s included Compare the outputs on your audio source with the inputs on the exact model, and check whether the box contains one speaker or a pair. I want to know whether my interface is compatible and whether I’ll have two speakers for stereo straight away. A complete set of compatible connections is the main concern for around 14% of consumers.

Common buying mistakes

  • Mistaking one monitor for a stereo pair

    Genelec lists the 8010A individually, while IK Multimedia specifies the original iLoud Micro Monitor as a pair and Yamaha lists the HS3 as a pair. What’s included in the box therefore varies by model.

    Before buying, check how many speakers come with the exact model and compare what you’ll need for a fully connected stereo pair.

    Buying one monitor may mean you’ll need a second unit and possibly additional cables.

  • Comparing low-frequency limits with different measurement definitions

    ADAM Audio lists the D3V at 45 Hz at −6 dB; IK Multimedia lists the original iLoud Micro Monitor at 45 Hz at −10 dB. These aren’t the same reference points.

    Check the dB limit given for the stated frequency and assess the sound in your own room; don’t treat the two figures as equivalent measurements.

  • Treating a positioning switch as a substitute for good placement

    Settings for different desk or wall positions are no substitute for positioning both speakers suitably and as evenly as possible.

    First plan where the left and right speakers will go. Then use the positioning settings available on the model you’ve chosen.

  • Inferring the power supply voltage from an overseas product specification

    For the HS3 and HS4, Yamaha warns that limiter settings vary depending on the power supply voltage and says you should follow the rating on the product’s rear panel.

    Check the rating on the rear panel of the unit you receive and follow the corresponding power supply instructions.

Brands to compare

ADAM Audio

ADAM Audio describes the D3V as an active desktop stereo set for uses including music production.

  • The manufacturer specifies USB-C and balanced TRS inputs, and mentions detachable feet.
  • The stated response of 45 Hz starts at −6 dB and doesn’t, on its own, tell you how the set will sound in your room.

IK Multimedia

According to IK Multimedia, the original iLoud Micro Monitor is a compact set with analogue RCA and stereo mini-jack inputs.

  • The manufacturer lists a pair of speakers, dimensions of 180 × 135 × 90 mm per speaker, and a connecting cable included in the box.
  • The stated 45 Hz is at −10 dB; don’t compare it directly with a frequency figure given at −6 dB.

Kali Audio

Kali Audio presents the LP-UNF as a set for nearfield listening at a desk, with settings for different desk and wall positions.

  • According to the manufacturer, USB-C, balanced TRS and RCA are available.
  • Check the dimensions and whether both speakers will fit on your desk and can be positioned symmetrically.

Yamaha

Yamaha specifies the HS3 as a compact monitor system supplied as a pair.

  • The specifications list combo XLR/TRS, RCA and stereo mini-jack inputs, plus room and high-frequency controls.
  • Yamaha lists cabinet depths of 189 and 177 mm for the left and right speakers. For the power supply voltage, follow the rating on the rear panel of the unit you buy.

Genelec

Genelec describes the 8010A as an individual active monitor with one analogue XLR input per unit.

  • The manufacturer lists dimensions of 195 × 121 × 115 mm including the Iso-Pod, as well as positioning switches.
  • The box contains one monitor; for stereo, you’ll need to consider buying two units and getting suitable connections.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors to assess the placement of vocals?

Point both monitors towards the same listening position and aim for a symmetrical setup at equal height. For stereo, Genelec describes a 60° angle between the monitors, with the listener ideally at the point of an equilateral triangle. The space on your desk and the layout of your room will also affect what’s practical.

Can I connect the monitors directly to my computer?

That depends on your computer’s connections and the exact monitor model. ADAM Audio specifies USB-C for the D3V; according to the manufacturer, the original IK Multimedia iLoud Micro Monitor has analogue RCA and stereo mini-jack inputs. Check which output and cable you’ll be using.

Should I order one speaker or two?

Check how many units come in the box for the exact model. Genelec lists one 8010A per box; IK Multimedia lists two speakers for the original iLoud Micro Monitor, and Yamaha supplies the HS3 as a pair.

What can I do if the speakers are close to a wall?

First, check whether both speakers can be positioned as evenly as possible in relation to your listening position and the wall. Kali Audio describes settings for desk and wall positions on the LP-UNF; Genelec points out that your room and speaker placement affect what you hear. A setting doesn’t guarantee that every position near a wall will work well.

What are my rights when buying online or if a product is faulty?

According to the Dutch government, online purchases from a business often come with a 14-day cooling-off period. In the Netherlands, you’re entitled to a product that works as it should, with no fixed statutory guarantee period, according to the Dutch government. If there’s a problem, contact the seller and check the terms that apply to your purchase.