Choose monitors that you can position to the left and right of your listening position, at a similar height and distance, without the screens obstructing their placement or causing unnecessary reflections. A compact desktop set-up may work if space is limited; separate nearfield monitors offer different connection and placement options, but check whether you need two units, suitable outputs and any extra equipment. No specification on its own guarantees that you’ll be able to judge your vocal layers accurately in your room.
Who are these monitors for?
Vocal-layer mixer
Wants to assess the balance between left and right, as well as individual vocal parts. A symmetrical listening position helps, but reflections from screens and the room are still worth considering. Genelec discusses both symmetrical monitor placement and reflections from hard surfaces.
Creator with a crowded dual-screen desk
Has limited space around the screens and is therefore comparing compact stereo systems, dimensions and mounting options. ADAM Audio, Kali Audio and Genelec describe models or options for compact placement.
Creator with an existing audio interface
Wants to know whether the connections are compatible, for example USB-C, XLR or TRS, and checks whether the package contains one monitor or a stereo pair. ADAM Audio, Genelec and Yamaha list different connection options and package contents for their models.
What should you look for when choosing?
Start with placement: work out whether you can position two monitors symmetrically towards your listening position. Then check that the connections and package contents suit your equipment; consider room correction as a further step.
| What to consider |
What to look for |
Who is it important for? |
| Stereo imaging for vocal harmonies |
Check whether both monitors can be positioned at a similar height and distance, pointing towards one listening position; allow for reflections from screens. |
When I mix vocal layers, I want to be able to judge the left-right balance and individual parts accurately. That’s why around 34% of consumers prioritise a stable stereo image. |
| Space around two screens |
Measure the space available for both speakers and compare desk, stand or mounting options. |
With two screens on my desk, I want to know whether a stereo pair will fit symmetrically without the screens getting in the way. Around 33% of consumers put physical fit first. |
| Connections and number of monitors |
Compare your computer or interface outputs with the monitor inputs, and check how many units are included in the package. |
If I want to use my existing equipment, I need compatible connections and the option to choose two speakers for stereo. Around 20% of consumers start by checking connections and package contents. |
| Room effects and bass response |
Check which placement settings are available and compare frequency limits only when they use the same stated dB reference. |
If I want to assess the bass and how my room affects the sound, I need to know what placement controls can and can’t do. Around 13% of consumers make this their main concern when buying. |
Common buying mistakes
-
Assuming one monitor is a stereo pair
Genelec lists one 8010A monitor per package. You need a left and a right monitor for stereo.
Read the package contents for the specific listing and check which connections you need.
If each package contains one monitor, you’ll need a second one for stereo; suitable cables or stands may also be required.
-
Comparing frequency limits without checking the dB reference
A stated lower limit at −10 dB is not directly comparable with a figure at −6 dB. Your room also affects what you hear from your listening position.
Note the measurement reference for each figure and assess placement and room acoustics separately.
-
Expecting room correction to fix poor placement
Screens and other hard surfaces can reflect sound. Genelec warns that calibration won’t solve every acoustic problem; Neumann’s optional calibration also requires additional measuring equipment.
First, set up the monitors symmetrically in a position that works for you. Then consider whether further calibration would be useful.
Calibration based on measurements may require additional measuring equipment.
Brands to consider
ADAM Audio
ADAM Audio describes the D3V as a compact active desktop system with USB-C, balanced TRS inputs, detachable feet and mounting points.
- Its connections and mounting options may be useful if two screens leave limited desk space.
- The stated frequency response uses a −6 dB reference; this is a manufacturer’s specification, not a measurement taken at your listening position.
Kali Audio
Kali Audio describes the LP-UNF as a monitor for ultra-nearfield listening at a desk, with settings for different desk and wall positions.
- The manufacturer lists USB-C, balanced TRS and unbalanced RCA as connection options.
- The stated figures of 39 Hz at −10 dB and 54 Hz within ±3 dB use different measurement references; don’t compare them as if they were measured on the same basis.
Genelec
Genelec describes the 8010A as a compact active monitor with an analogue XLR input and placement controls.
- The manufacturer lists dimensions of 195 × 121 × 115 mm with the Iso-Pod.
- The package contains one monitor; you’ll need two for stereo. The stated lower limit of 67 Hz is based on −6 dB and doesn’t describe how the monitor will sound in your room.
Yamaha
Yamaha describes the HS5 as an active nearfield monitor with XLR and TRS inputs, ROOM CONTROL and HIGH TRIM.
- The manufacturer lists a cabinet width of 170 mm; check whether two monitors will fit symmetrically beside your screens.
- The stated lower limit of 54 Hz uses a −10 dB reference and is not directly comparable with figures based on −6 dB.
Neumann
According to Neumann, the KH 80 DSP combines a compact nearfield design with a placement adjustment switch. The manufacturer describes measurement-based calibration using optional MA 1 equipment and software.
- This may suit you if you want to use measurement-based calibration after carefully positioning the monitors.
- The measurement microphone is optional and doesn’t replace a carefully planned basic set-up; check whether you need to buy it separately.
Joybuy products
Related products coming soon.
Frequently asked questions
Should the monitors go in front of or beside the two screens?
Point both monitors towards your listening position as symmetrically as possible. Genelec describes a 60° angle between the monitors as ideal for stereo placement. Screens are hard surfaces that can reflect sound, so consider the position of the screens and speakers together.
Can you connect studio monitors directly to your computer?
That depends on the model’s connections and your computer. ADAM Audio lists USB-C audio for the D3V, while Genelec lists an analogue XLR input for the 8010A. Check that the outputs and inputs are compatible and confirm which connection you need.
What can you do if the monitors sound different from expected once they’re set up?
First, check that the left and right monitors are positioned equally and whether the screens, desk or room are causing reflections. Some models have placement settings; Genelec warns that calibration alone won’t solve every acoustic problem.
What warranty and cooling-off period apply to an online purchase in the Netherlands?
For a consumer purchase, you’re entitled to a statutory guarantee if a product doesn’t meet what you could reasonably expect under normal use; the retailer is your point of contact. According to ACM ConsuWijzer, online purchases often come with a cooling-off period of up to 14 days after delivery, subject to statutory exceptions.
Which electrical safety rules should you check for a monitor?
Electrical equipment covered by the EU Low Voltage Directive must meet its requirements, including CE marking where applicable. EUR-Lex gives the directive’s voltage range as 50–1.000 V AC or 75–1.500 V DC. Check the requirements for the specific monitor and any external power supply; don’t assume it complies based on the model name or listing alone.