Who are these monitors for?

Mixer with one spare socket

You want to assess vocal layers in stereo without needing a separate socket for each speaker. So compare the power setup and the cable between the cabinets. The ADAM Audio and PreSonus manuals describe sets with one powered main cabinet and a second cabinet connected to it.

Vocal mixer with a small desk

You want to position two speakers around a screen and other equipment, while assessing the balance between vocal layers. Genelec emphasises that positioning the speakers as evenly as possible, with similar reflections on the left and right, helps create a consistent stereo image.

Mixer with an existing audio interface

You want to connect the monitors to the outputs you already use. Connections vary by model: ADAM Audio lists USB-C and balanced TRS, while Genelec specifies an analogue XLR input for the 8010A.

What should you look for when choosing?

When you have few spare sockets, the power setup is a sensible place to start. Then consider how you’ll position the stereo pair, the connections and what’s included in the box.

What to consider What should you check? Who is this important for?
Sockets required Count the mains plugs needed for the complete stereo pair. Check where the power supply connects and what cable is needed between the cabinets. I want to connect two speakers without needing a second spare socket; around 33% of consumers also say the number of mains connections required is their main reason for buying.
Stereo positioning Measure to see whether both cabinets will fit and can be placed at equal distances from your listening position. Allow for cables, stands and the space around your screen. If I want to assess vocal layers accurately in stereo, I need to be able to position both cabinets comfortably; around 27% of consumers prioritise stereo positioning and assessing vocal layers.
Connections Make a note of your computer or audio interface outputs. Compare them with the inputs on the exact model and check which cables you’ll need. I want to connect my existing computer or interface without an unnecessary converter; around 20% of consumers say compatibility with their audio source is their main buying priority.
What’s included Check whether you’re buying a pair or a single monitor, and which power, speaker and signal cables are included. Also make sure the plug suits your setup. I want to set up a complete stereo system straight away, rather than discover later that a cabinet or cable is missing; around 20% of consumers pay closest attention to this.

Common buying mistakes

  • Assuming one monitor is a complete stereo pair

    A product name doesn’t always make it clear whether you’ll receive one cabinet or two. Yamaha lists the HS4 as a pair, while Genelec sells the 8010A individually.

    Before you buy, check how many speakers are included and what else is in the box.

  • Confusing amplifier power with the number of sockets needed

    The stated amplifier power doesn’t tell you how many mains plugs the set needs. The ADAM Audio manual describes the D3V as having a power supply for the primary speaker and a connection to the second cabinet.

    Compare the power connections and check the manual. Don’t work out how many sockets you need from the wattage.

  • Comparing frequency limits measured under different conditions

    Yamaha lists 60 Hz at −10 dB and 83 Hz at −3 dB for the HS4. These are different measurement points, and speaker placement and the room also affect what you hear.

    Only compare frequency ranges measured at the same dB level, and assess positioning separately.

  • Connecting extension leads together to gain more sockets

    Two separately powered monitors still need a mains connection each. The Netherlands Fire Service advises against connecting extension leads to one another.

    Choose a set with a documented power setup that suits your available connections. Use only a suitable, undamaged extension socket and don’t connect extension leads together.

Brands to compare

ADAM Audio

The D3V is a compact stereo set for desktop use, with USB-C and analogue TRS inputs.

  • The manual describes a power supply for the primary cabinet and a cable connecting it to the second speaker.
  • Check that the supplied cable suits your desk layout. The D3V’s power setup doesn’t necessarily apply to other models.

Yamaha

Yamaha describes the HS4 as a compact stereo set with analogue inputs.

  • Yamaha lists it as a pair, with positioning controls and an active left cabinet connected to the right one.
  • The stated frequency limits are measured at different dB levels, and don’t on their own determine what you’ll hear in your room.

Kali Audio

Kali describes the LP-UNF as a set for close-range mixing at a desk, with USB-C and balanced TRS inputs.

  • Kali lists settings for different desk and wall positions.
  • Positioning settings don’t replace suitable stereo placement or an assessment of the room. Check which power supply and cables are included with the version you choose.

PreSonus

The Eris 3.5 2nd Gen is a compact set sold as a pair.

  • PreSonus specifies TRS, RCA and 3.5 mm stereo inputs; the manual describes one active and one passive cabinet.
  • Don’t confuse the standard Eris 3.5 with the 3.5BT, and check what’s included with the exact version you’re buying.

Genelec

The 8010A is an active monitor sold individually, with an analogue XLR input.

  • Genelec lists one mains lead per monitor pack.
  • You’ll need two monitors for stereo, so allow for two mains connections and two suitable signal connections.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need one speaker or a stereo pair for vocal harmonies?

If you want to assess the position and balance of vocal layers in stereo, plan for two speakers around a listening position that’s as symmetrical as possible. Yamaha sells the HS4 as a pair, while Genelec lists the 8010A individually.

How should you position your monitors before assessing the vocal balance?

Angle both cabinets towards your listening position and keep their left-to-right arrangement as symmetrical as possible. Genelec recommends an equilateral listening triangle for music production where possible; the room and reflections will still affect what you hear.

Can you use an extension socket to provide extra connections for two separately powered monitors?

An extension socket doesn’t turn the two required mains plugs into one. The Netherlands Fire Service advises using approved, undamaged extension sockets and not connecting extension leads to one another. Check that the extension socket is suitable for your particular setup.

Who can help if a set you’ve bought develops a fault?

For a consumer purchase in the Netherlands, the seller must offer a solution if the product doesn’t meet what you could reasonably expect. According to the Dutch government, there’s no fixed statutory guarantee period; a manufacturer’s guarantee is in addition to your statutory rights.

Does a CE mark prove that a monitor is suitable for mixing vocals?

No. For electrical equipment covered by the relevant rules, the CE mark forms part of the manufacturer’s declaration of conformity; the Dutch government stresses that it isn’t a quality mark. So the mark doesn’t tell you whether the stereo image will work well in your room. Versions with Bluetooth are also subject to the relevant rules for radio equipment.