Who is this buying guide for?

Mixer with a crowded desk

You’re looking for space on either side of two computer screens for a stereo pair, without losing sight of your listening setup. Genelec and ADAM Audio recommend symmetrical positioning around the listening position as the starting point for stereo monitoring.

Producer who wants to assess the bass

You want to assess the bass and kick in your mix, and are weighing up what compact monitors, your room and possibly a subwoofer mean for that. ADAM Audio describes a subwoofer as a way to hear the lower frequencies.

Creator with an established computer workflow

You want to know whether your monitors will connect directly to your computer or need to be connected via the outputs of your existing audio equipment. According to ADAM Audio, Genelec, IK Multimedia and Yamaha, the models described differ in their USB-C, TRS, XLR, RCA and 3.5 mm connections.

What should you look for?

Compact active desktop sets

A good fit if: you have little room left beside your screens, but can still position the speakers symmetrically. The ADAM Audio D3V is a pair with USB-C and balanced TRS inputs; the IK Multimedia iLoud Micro Monitor is a two-speaker set with analogue connections.

Bear in mind: check the connections, and only compare stated bass extension when you also take the measurement basis into account. The D3V and iLoud Micro Monitor specifications use different dB thresholds.

Separate nearfield monitors

A good fit if: you have room for each speaker and suitable stereo outputs. The Genelec 8010A has an XLR input per monitor; the Yamaha HS5 has XLR and TRS inputs.

Bear in mind: check whether you need two units: Genelec states that each pack contains one 8010A, and Yamaha states that each pack contains one HS5.

Monitors with room adjustment

A good fit if: you want adjustment options for your desk or room as well as symmetrical positioning. The Neumann KH 80 DSP has a setting for different desk sizes.

Bear in mind: automatic adjustment with MA 1 requires the dedicated measurement solution; Neumann’s statements about the results are manufacturer claims.

What to consider What should you check? Who should consider this?
Positioning beside two screens Measure the available space on both sides and check whether you can angle the monitors towards your listening position. If I use two screens but still want to set up a symmetrical stereo pair, available space is my first concern. Around 31% of consumers also give positioning beside two screens their highest priority.
Stereo image and room acoustics Consider the distance between the monitors, their distance from your listening position, and any available desk or room settings. When I’m assessing a mix, I want both monitors to be positioned as evenly as possible relative to my listening position. Around 25% of consumers put the stereo image and room acoustics first.
Connections Compare the stereo outputs on your computer or audio interface with the monitor inputs, and check which cables you’ll need. If I want to keep using my existing equipment, the connections on both monitors need to be compatible with it. This is the top priority for around 19% of consumers.
Bass response For frequency limits, check the measurement basis too, such as −6 dB or −10 dB; then decide whether you need extra bass monitoring. I want to assess what’s happening with the bass and kick in my mix, so I look at both the bass response and the measurement basis. Around 13% of consumers name bass monitoring as their top priority.
Complete stereo pair Check how many monitors are in the pack and which cables, stands or measurement equipment are included. If I want to put together a working stereo pair straight away, I need to know which other components I’ll need. For around 12% of consumers, the overall cost of the complete setup is the most important consideration.

Common mistakes

  • Choosing a monitor before checking your setup

    If your screens force one speaker out of position, that can change how the stereo image sounds from your listening position.

    Map out your screens, listening position and speaker locations before choosing a model or size. Genelec and ADAM Audio recommend symmetrical stereo positioning as the starting point.

  • Comparing bass extension figures with different measurement bases directly

    A stated limit at −3 dB, −6 dB or −10 dB isn’t necessarily measured on the same basis, so the same number of hertz doesn’t automatically mean the specifications are equivalent.

    Check the dB threshold alongside the frequency range, then consider separately whether you need extra bass monitoring for your mix.

  • Assuming every pack contains a stereo pair

    Genelec states that each pack contains one 8010A, and Yamaha lists the HS5 as a single-speaker pack; ADAM Audio describes the D3V as a pair.

    Before ordering, check the number of monitors and which cables you’ll need for the left and right speakers.

  • Treating room correction as a substitute for good positioning

    Monitor positioning and reflections around your desk and screens still affect what you hear. For automatic adjustment with MA 1, Neumann describes a separate measurement solution.

    Start with the most symmetrical setup you can achieve, then check which adjustment equipment is needed for your chosen configuration.

Brands to compare for this setup

ADAM Audio

The D3V is an active desktop set for desks with limited space, with USB-C and balanced TRS connections.

  • ADAM Audio lists detachable stands and positioning settings.
  • The frequency limit and output performance are manufacturer specifications, not independent measurements of the monitors in your two-screen setup.

Genelec

The 8010A is a separate, compact active monitor with an XLR input, for workspaces with limited width on each side.

  • Genelec specifies a width of 121 mm with Iso-Pod and lists room settings.
  • The pack contains one monitor. Genelec gives a lower limit of 67 Hz at −6 dB; bear this in mind if you need to assess a lot of bass.

IK Multimedia

The iLoud Micro Monitor is a compact set of two speakers with RCA and 3.5 mm connections.

  • IK Multimedia states that the pack contains two speakers and a connecting cable.
  • The stated lower limit of 45 Hz uses −10 dB, so it isn’t directly comparable with a figure given at −6 dB. Check that the analogue inputs are compatible with your equipment.

Yamaha

The HS5 is a separate active nearfield monitor for a workspace with room on each side, with XLR or TRS connections.

  • Yamaha lists ROOM CONTROL and HIGH TRIM, and gives frequency ranges at both −10dB and −3dB.
  • The pack contains one speaker. The specifications alone don’t show that the HS5 is better suited to use beside two screens.

Neumann

The KH 80 DSP is a compact active nearfield monitor with DSP and room adjustment options.

  • Neumann lists a setting for different desk sizes.
  • Automatic adjustment with MA 1 requires the dedicated measurement solution. Neumann’s statements about the audible results are manufacturer claims, not an independent comparison for your workspace.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitoring speakers when I already have two computer screens?

Start with your usual listening position and find the most symmetrical positions you can on either side. Genelec recommends a 60° angle between the monitors, with the listener ideally at the point of an equilateral triangle; check whether your screens and desk allow for this setup. This is the manufacturer’s positioning advice.

Can I connect the speakers directly to my computer?

That depends on the inputs on the exact model and the outputs on your computer. ADAM Audio lists USB-C and two balanced TRS inputs for the D3V; Genelec lists one analogue XLR input per 8010A. Check which stereo connection you have and which cables you’ll need.

When should I consider a subwoofer?

Consider a subwoofer if your current speakers can’t reproduce the relevant low frequencies well enough for you to assess them. ADAM Audio explains that a subwoofer can extend the lower frequency range, but also notes that matching it incorrectly with the monitors can be an issue. So check the positioning and setup first; a subwoofer isn’t automatically necessary with a stereo pair.

What should I do if a monitor bought online turns out to be faulty?

For consumer purchases in the Netherlands, a product must meet reasonable expectations according to the Government of the Netherlands; if a product is faulty, the seller is your point of contact. The Netherlands has no fixed statutory warranty period of two years. For eligible online distance purchases, you’ll often have 14 days to change your mind; check the terms that apply to your purchase.

What should I check when buying an electric monitor from outside the EU?

Check who the seller is, which version you’re buying, and whether the required safety information and markings are present. The Government of the Netherlands states that electronic devices placed on the market in the EU must have a CE marking, and warns that your rights and product safety may differ when buying from an online shop outside the EU. This general information doesn’t confirm the specifications of any particular item.