Who is this choice relevant to?

Demo maker with a crowded desk

You work on a demo behind two screens and need a practical stereo setup without placing the monitors behind them. Genelec explains how screens can reflect sound, while ADAM Audio provides guidance on stereo placement.

Vocal and instrument mixer

You want to assess balance and stereo placement, and have room to angle two speakers towards your listening position. Genelec and ADAM Audio both recommend a symmetrical setup as a starting point.

Creator who wants to connect straight away

You want to know whether you can connect your computer directly to your chosen system, or whether you’ll need an audio interface and suitable cables. Connections vary, for example, between the ADAM Audio D3V, Yamaha HS4 and JBL 305P MkII.

What should you look for?

First measure the space around both screens, then work out which connections and what’s included in the box will suit your workspace. Compare frequency figures only when you know the conditions they were measured under.

What to consider What should you check? Who should prioritise this?
Placement beside two screens Measure the available space and check that both monitors can sit at a similar height and point towards your listening position. If I have two screens on my desk, I want enough room on the left and right to point the monitors towards my listening position. Around 36% of consumers say placement is their main concern when buying.
Vocals, instruments and stereo balance Compare the recommended listening distance and placement instructions, and bear in mind reflections from screens and other hard surfaces. When assessing vocals and instruments, I want to judge the balance and stereo position from my usual seat. Around 29% of consumers prioritise assessing the mix.
Connecting to a computer or interface Note the outputs on your computer or audio interface and compare them with the inputs on the exact model, as well as the cables supplied. If I want to use my existing computer or interface, I want to know in advance which connections and cables I’ll need. Around 21% of consumers say connectivity is their main concern when buying.
Bass and a complete pair Check the measurement conditions for frequency figures and whether the box contains one monitor or a pair. If I want to assess the bass, I also need to know whether I’m buying one speaker or a complete stereo pair. Around 14% of consumers prioritise bass response and a complete set.

Common buying mistakes

  • Assuming one monitor is a complete stereo set

    The Genelec 8010A is sold individually, while the Yamaha HS4 comes as a pair. You’ll need two speakers for stereo.

    If a model is sold individually, you’ll also need a second speaker. Check which cables will suit your setup, too.

    Before working out what you need for a stereo set, check how many speakers are included in the exact version you’re buying.

  • Comparing frequency limits directly

    Manufacturers may state frequency limits using different dB conditions. Figures measured under different conditions are not necessarily a like-for-like indication of bass response in your room.

    Check the stated measurement conditions for each figure and consider whether the information tells you what you need to know for your demo.

  • Assuming an adjustment switch will fix poor placement

    Screens and other hard surfaces can reflect sound. A setting for desk or wall placement won’t automatically remove the effect of the room.

    Brands to compare

    ADAM Audio

    ADAM Audio describes the D3V as a compact active desktop system for songwriters and others, with USB-C and balanced TRS inputs.

    • The manufacturer lists USB-C, two balanced TRS inputs and supplied positioning feet. These are useful features for a crowded desk.
    • The stated lower frequency limit of 45 Hz is measured at −6 dB. This figure is not an independent measurement of performance in your room.

    Yamaha

    The Yamaha HS4 is a compact analogue monitor setup supplied as a pair.

    • Yamaha lists analogue inputs and room control switches for the HS4.
    • The stated lower frequency limit is 83 Hz at −3 dB. Check that the analogue inputs are compatible with the outputs on your computer or interface.

    Kali Audio

    Kali describes the LP-UNF as a system for mixing at your desk. The IN-UNF has a different layout, with separate satellites and a bass unit.

    • For the LP-UNF, Kali describes settings for different placements on or behind a desk.
    • For the IN-UNF, the manufacturer specifies that the bass unit must sit on the desk. This placement requirement applies to that model, not the LP-UNF.

    Genelec

    The Genelec 8010A is a compact active monitor sold individually, with an analogue XLR input.

    • Genelec lists compact dimensions of 121 × 195 × 115 mm, including the Iso-Pod, and room compensation switches.
    • The box contains one speaker. The stated lower frequency limit of 67 Hz is measured at −6 dB.

    JBL Professional

    The JBL 305P MkII is a single active 5-inch nearfield monitor with balanced XLR and TRS inputs.

    • JBL lists Boundary EQ and HF Trim as settings for adjusting the sound to your chosen setup.
    • Manufacturer claims about stereo imaging and performance are not independent comparative measurements.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Do the monitors need to sit right next to my two screens?

Not if that compromises a good listening setup. Try to point both monitors as symmetrically as possible towards your usual listening position. Genelec notes that computer screens can reflect sound, so measure up beforehand to check whether your chosen placement will work.

Can you connect studio monitors directly to your computer?

It depends on the model and your computer’s outputs. According to the manufacturer, the ADAM Audio D3V has USB-C audio, while each Genelec 8010A speaker has an analogue XLR input. Compare the connections before choosing a model.

How do you adjust monitors once they’re in place?

Start by positioning and angling both monitors, then use the settings recommended for the exact model and placement. Kali describes different desk and wall positions for the LP-UNF, while JBL describes Boundary EQ as a placement setting. These are the manufacturers’ recommendations, not a guarantee that room effects will disappear.

What warranty and cooling-off period apply when buying online in the Netherlands?

The Dutch Government states that there is no fixed statutory warranty period in the Netherlands. For online purchases, a 14-day cooling-off period applies in many cases. The right to change your mind and your rights if a product is faulty are separate matters. Check the terms for your specific purchase.

Does a CE mark prove that a studio monitor sounds good?

No. Business.gov.nl explains that CE marking is not a quality mark. When choosing, assess separately whether the connections, placement and features suit your workspace; the marking itself says nothing about sound quality.