Who are these monitors for?

Editors with a crowded desk and two screens

You want to know whether two speakers will fit neatly and symmetrically alongside your screens. Genelec points out that computer screens can reflect sound and affect stereo imaging.

Editors who assess details in recordings

You want to assess sound and balance while editing, so you look beyond a frequency figure to the listening position and the room. Genelec explains why placement matters; the stated specifications also depend on the measurement basis and listening environment.

Editors looking for the right connection

You’re choosing between options such as USB-C audio and analogue connections for your existing equipment. ADAM Audio lists USB-C for the D3V; the PreSonus, Yamaha and Genelec models mentioned have different analogue inputs.

What should you consider when choosing?

Compact active stereo pair

Choose this if: you have limited space beside your screens and want a pair that connects to your computer. ADAM Audio describes the D3V as a pair with USB-C and TRS inputs; PreSonus lists analogue inputs for the Eris 3.5 2nd Gen.

Bear in mind: the connection needs to suit your computer and setup. PreSonus’s stated lower limit of 80 Hz doesn’t guarantee that you’ll be able to assess all the deep bass in a recording in your room.

Two separate active nearfield monitors

Choose this if: you can position the left and right speakers separately and have a suitable analogue audio output. Yamaha lists XLR and TRS inputs for the HS5; Genelec lists an XLR input for the 8010A.

Bear in mind: Yamaha and Genelec state that the HS5 and 8010A, respectively, are sold as one monitor per package. You’ll therefore need two suitable speakers for stereo, as well as the right cables.

Nearfields with adjustment options

Choose this if: you’d like to explore additional adjustment options. KRK lists three listening modes and 25 EQ combinations for the ROKIT 5 Generation Five; JBL lists Boundary EQ and HF Trim for the 305P MkII.

Bear in mind: these manufacturer specifications don’t prove that the settings will resolve reflections from your screens or problems in the room. Also check whether the version includes one speaker or a pair.

What to consider What should you check? Who is this important for?
Positioning alongside two screens Measure the available space on the left and right, and check whether both speakers can be positioned symmetrically at the same height and angled towards your listening position. If I place the monitors alongside two screens, I want a suitable stereo setup without one side being noticeably different. Around 33% of consumers say positioning is their top priority.
Assessing details in recordings Only compare frequency figures when they use the same measurement limit, and take the listening position and room into account. When editing, I want to assess sound and balance, not just compare a figure on a specification sheet. Around 25% of consumers prioritise assessing details in recordings.
Connecting to your workstation Check your computer or interface’s audio output, the two channels you need, and the inputs and cables for the exact model. If I want to use my existing equipment, the monitors’ connections need to suit my computer or audio interface. Around 25% of consumers choose mainly on the basis of connectivity.
A complete stereo system Check whether the package contains one speaker or a pair and which signal cables you’ll need. For bass response, note the stated measurement limit. I want to know in advance how many speakers and connections I’ll need for stereo editing, and what limitations apply to the stated bass response. Around 17% of consumers prioritise a complete stereo system and suitable bass response.

Common buying mistakes

  • Mistaking one speaker for a stereo pair

    The ADAM D3V and PreSonus Eris 3.5 2nd Gen are described as pairs, while Yamaha lists one HS5 per package and Genelec one 8010A. Don’t assume how many speakers are included based on the model name alone.

    Check how many speakers are included with each offer and what you’ll need for a complete stereo setup.

    If a model is sold individually, you’ll need a second one for stereo. Also check which compatible connection cables you’ll need.

  • Relying on a frequency figure alone

    Yamaha lists 54 Hz at −10 dB for the HS5; Genelec gives 67 Hz at −6 dB for the 8010A. These use different measurement limits, so the figures aren’t directly comparable. The room and listening position also affect what you hear.

    Check the measurement limit for each frequency figure and consider the setup too. Only compare figures that use the same measurement basis.

  • Expecting EQ to make positioning unnecessary

    Genelec describes screens as surfaces that can reflect sound. Adjustable EQ doesn’t prove that reflections from two screens or other room problems will disappear.

    First, make room for a symmetrical stereo pair. Then consider the available settings as part of that setup.

Brands to consider

ADAM Audio

The D3V is a compact active desktop pair; the T5V is a separate active nearfield monitor.

  • ADAM Audio lists USB-C, TRS inputs, desktop stands and room settings for the D3V.
  • According to ADAM Audio, the T5V has a rear-facing bass reflex port. Bear the distance from the wall in mind when positioning it.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo pair for desktop use.

  • PreSonus lists TRS, RCA and 3.5 mm inputs, plus a headphone socket.
  • The stated frequency response starts at 80 Hz; that figure doesn’t predict how the bass will sound at your listening position.

Yamaha

The HS5 is a separate active nearfield monitor for a workstation with suitable analogue outputs.

  • Yamaha lists XLR and TRS inputs, along with ROOM CONTROL and HIGH TRIM settings.
  • The European product information lists one HS5 per package. The stated 54 Hz at −10 dB isn’t directly comparable with a figure using a different measurement limit.

Genelec

The 8010A is a compact, separate active monitor with an XLR input.

  • Genelec lists dimensions of 195 × 121 × 115 mm, including the Iso-Pod.
  • According to Genelec, the package contains one monitor. The stated lower limit is 67 Hz at −6 dB; the manufacturer’s description of its sound isn’t an independent assessment of your room.

KRK

The ROKIT 5 Generation Five is a separate active monitor with adjustment options.

  • KRK lists three listening modes and 25 combinations of boundary and EQ settings.
  • These are manufacturer specifications; they don’t prove that reflections from screens or problems in the room will disappear. The product page lists one monitor.

JBL Professional

The 305P MkII is a separate active monitor with balanced analogue inputs and adjustment options.

  • JBL lists XLR and TRS inputs, Boundary EQ and HF Trim.
  • JBL’s description of the listening area isn’t an independent performance measurement for a specific workstation with two screens.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two studio monitors alongside two screens?

Angle the speakers symmetrically towards your listening position and use the equilateral triangle that Genelec describes as a starting point. Make sure the screens don’t create noticeably different reflections on the left and right, and assess the final setup in your own room.

Can you connect active studio monitors directly to your computer?

That depends on the model’s inputs and your computer’s audio output. ADAM Audio lists USB-C audio for the D3V. According to Yamaha, the HS5 has XLR and TRS inputs, so you’ll need a compatible output and cables.

What should you check after moving your screens or speakers?

Check the symmetry, speaker angles and your listening position again. Genelec explains how positioning and large objects can affect sound. Follow the instructions for the model you buy when cleaning it and using it safely.

Do you have a cooling-off period and statutory guarantee when buying online in the Netherlands?

According to ACM ConsuWijzer, online consumer purchases generally come with a cooling-off period of up to 14 days after delivery, although exceptions apply. You’re also entitled to a statutory guarantee if a product doesn’t meet reasonable expectations under normal use; two years isn’t a general fixed guarantee period in the Netherlands.

Which product safety rules apply to active studio monitors in the Netherlands?

According to Business.gov.nl, electrical equipment sold in the Netherlands must meet the applicable European requirements. Once the relevant conditions have been met, the manufacturer must apply the CE marking and draw up an EU declaration of conformity. Check this for the specific version: a model name alone doesn’t prove that the item being offered meets these requirements.