Who is this choice relevant to?

Mixer with one spare mains socket

You want to connect a stereo pair without using a separate mains plug for each speaker. Check the required signal inputs, power cable and connection between the speakers. Hercules specifies a single mains cable for the DJMonitor 42; ADAM Audio lists an external power supply for the D3V.

Dialogue and effects mixer

You check intelligibility and stereo positioning at close range, but also want to know which low soundtrack elements a compact monitor may not reproduce accurately. The stated frequency limits and their measurement criteria can help you read the specifications carefully.

Mixer in a temporary workspace

You move your setup and are considering battery power or an existing amplifier. Check the battery or charging arrangements, the exact model version and the cables you’ll need. AIAIAI distinguishes the UNIT-4 MKII from the earlier MKI.

What should you look for when choosing?

Your choice comes down to four key considerations. Each row shows approximately what proportion of consumers prioritise that factor.

Consideration What should you check? Who is this important to?
Mains sockets Count the mains plugs needed for your whole setup, including your interface and any amplifier. Also check the inputs and speaker cable length. If I already have equipment on my desk, I want to connect my stereo pair without needing an extra mains plug for each speaker. Around 31% of consumers prioritise using fewer mains sockets.
Low effects Read frequency limits alongside their measurement criteria; a limit at ±3 dB is not directly comparable with one at −10 dB. If low effects are important to my mix, I want to know which elements I can assess on compact monitors and what I need to check in addition. Around 31% of consumers prioritise checking low soundtrack elements.
Dialogue and connectivity Compare your interface outputs with the inputs on the exact model, such as RCA, TRS or USB-C. Check whether you can position the speakers to suit your listening position. When I mix dialogue, I want to connect my source without an unsuitable connection and create a useful stereo image. Dialogue, connectivity and positioning are priorities for around 23% of consumers.
Portability Check the exact model generation, charging arrangements and the wired or wireless connection you plan to use. For a temporary workspace without a mains socket near the speakers, I want to know whether the monitors can run on battery power during a session. Around 15% of consumers prioritise portability.

Pitfalls to avoid

  • Assuming passive means no power is needed

    A passive Avantone Mixcube needs a suitable amplifier; a line output is no substitute for a power amplifier.

    Choose this option mainly if you already have a suitable amplifier, and remember to factor in its power requirements.

    Without a suitable amplifier, you’ll also need speaker cables and a power supply for the amplifier.

  • Comparing frequency limits with different measurement criteria

    Manufacturers may state frequency limits in different ways. For example, the Kali LP-UNF has specifications at both ±3 dB and −10 dB; these limits are not equivalent.

    Note the measurement criterion for each specification, and check critical low effects using other references too.

  • Ordering a UNIT-4 without checking the generation

    AIAIAI lists USB-C charging for the UNIT-4 MKII and DC charging for the earlier MKI.

    Before buying, check the model generation, the included charging equipment and the transmitter that suits your setup.

  • Assuming a commercial guarantee is your only warranty right

    ACM ConsuWijzer distinguishes between a commercial guarantee and your statutory rights against the retailer.

    Read the terms of any extended commercial guarantee alongside your statutory rights.

Brands worth considering

ADAM Audio

The D3V is a compact active desktop set with USB-C and TRS connections.

  • ADAM Audio specifies USB-C and balanced TRS inputs.
  • The set uses an external power supply. Sound On Sound also describes this power supply; a stated low-frequency limit is not a measurement of performance in your listening room.

Kali Audio

The LP-UNF is a compact nearfield option with a range of inputs and placement settings.

  • Kali specifies USB-C, RCA, balanced TRS and placement settings.
  • The manufacturer lists frequency limits using different measurement criteria; also check the power supply and cabling included with the set on offer.

PreSonus

The Eris 3.5 2nd Gen is a compact set for close listening, with TRS, RCA and 3.5 mm inputs.

  • PreSonus says a speaker cable is included and specifies a frequency range starting at 80 Hz.
  • That stated limit does not automatically make the set suitable for fully checking low effects in a theatre soundtrack.

Avantone Pro

The passive Mixcube can serve as an additional reference if you already have a suitable amplifier.

  • Avantone Pro specifies a nominal impedance of 8 ohms and a range of 200 Hz–10 kHz.
  • The monitor requires external amplification and, based on its stated frequency limits, is not a standalone reference for deep bass.

AIAIAI

The UNIT-4 is a portable, battery-powered monitor. When choosing, take note of the difference between the MKI and MKII.

  • AIAIAI lists a 20-hour battery life and balanced TRS inputs for the UNIT-4.
  • This is the manufacturer’s stated figure, not a battery-life measurement for your session. AIAIAI lists different charging methods for the two generations.

Hercules

The DJMonitor 42 is an active stereo set with one mains cable and a connection between the speakers.

  • Hercules lists RCA and 3.5 mm connections.
  • The manufacturer does not list a balanced TRS input for studio interfaces; claims about sound quality are not an independent suitability test for a theatre soundtrack.

Joybuy products

Related products coming soon.

Frequently asked questions

Do two active monitors always need two mains sockets?

No, it depends on the model. Hercules lists one mains cable and a cable between the speakers for the DJMonitor 42; ADAM Audio documents an external power supply and a connection between the speakers for the D3V. Check the exact set and remember to count your other equipment too.

How should I position monitors for checking dialogue?

Start with a symmetrical listening setup. For the DJMonitor 42, Hercules recommends a 60° angle between the speakers and the listener, with your ears level with the midpoint between the tweeter and woofer. This is placement advice for that model, not proof that the room is acoustically suitable.

Can I solve a shortage of mains sockets by connecting extension leads together?

No. Don’t connect extension leads or multiway adaptors to each other, and observe the maximum load for each adaptor. Zorg Brandveilig, an initiative involving the Netherlands Fire Service, among others, gives this safety advice; it does not say anything about the specific power consumption of a monitor.

What are my rights when buying online in the Netherlands?

For a standard online consumer purchase, you generally have a statutory 14-day cooling-off period after delivery, although exceptions may apply. If a product does not do what you could reasonably expect under normal use, the retailer is responsible under the statutory guarantee. ACM ConsuWijzer explains these rights; a commercial guarantee is separate.

What product safety should I check for electric monitors?

Electrical equipment placed on the EU market must meet the applicable safety requirements; a CE mark is required where the rules specify it. The Dutch government explains these requirements for electronic equipment. Check the information for the exact device and power supply; assess a separate passive speaker and amplifier individually.