Who are these monitors for?

Student mixing dialogue and stereo effects

You want to position voices and effects from a fixed listening position. Symmetry and room reflections are important considerations here; Genelec recommends an equilateral setup for stereo, with the listener at the apex.

Mixer with a small or shared desk

You want a practical stereo pair and suitable connections without taking up too much space. Compare the available space with the dimensions of both cabinets, and check which inputs are compatible with your equipment.

Mixer working with bass-heavy scene effects

You want to assess rumbles and other low-frequency effects. Getting more bass requires careful attention to room acoustics and, if you use a subwoofer, its placement and setup.

What should you look for when choosing?

Key consideration What to look for Who should prioritise this?
Dialogue and stereo positioning Can you place two monitors at the same height and position them symmetrically towards one listening spot? Genelec recommends a 60° angle between the monitors, with the listener at the apex of an equilateral triangle. If I want to assess voices and stereo movement reliably from my listening position, I pay attention to setup and reflections; around 33% of consumers prioritise dialogue and stereo positioning.
Space and quiet working Measure to make sure there’s room for both cabinets and the cables. If placing them close to a wall, check the guidance for rear-facing bass-reflex ports, and consider volume levels and household rules. At a small or shared desk, I want to be able to position a symmetrical pair and keep listening levels under control; around 27% of consumers with limited space prioritise quiet working.
Bass-heavy effects When checking the stated frequency limit, also note the dB measurement point. Assess the bass at your listening position, and make sure you can manage placement and phase, level and crossover settings before choosing a subwoofer. If low-frequency scene effects matter, I don’t want to rely on a frequency figure alone; I want to assess the result in my room. Around 20% of consumers prioritise bass response.
Connections and a complete stereo setup Compare the inputs on the exact model with the outputs on your computer or interface. Check whether the box contains one monitor or a pair, and which cables or other connection equipment you’ll need. I want to connect two working channels to my existing equipment and know in advance what I’ll need; around 20% of consumers prioritise connectivity and a complete purchase.

Common buying mistakes

  • Comparing frequency limits without checking the dB measurement point

    A stated lower limit at −10 dB isn’t directly comparable with one at −6 dB. The room and monitor placement also affect the bass you hear.

    Note the measurement point for each frequency specification, and assess low-frequency effects where you’ll be mixing.

  • Mistaking a single active monitor for a complete pair

    A stereo mix needs two channels, but some active monitors are sold individually. An analogue connection also won’t necessarily plug straight into every computer.

    Check what’s included in the box and the left and right connections before choosing a model.

  • Assuming room EQ or a subwoofer can make up for poor placement

    Genelec notes that calibration doesn’t always fully resolve room issues. A subwoofer also needs suitable placement and phase alignment.

    First, create a practical, symmetrical listening setup. Then assess whether you need any additional adjustment.

    Placement and setup take time; depending on your chosen arrangement, you may also need extra measurement or connection equipment.

Relevant brands to consider

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a compact active pair suited to setups including small studio spaces.

  • PreSonus lists balanced TRS inputs, unbalanced RCA and 3.5mm inputs, and a headphone output.
  • The stated frequency range starts at 80 Hz. So assess bass-heavy effects at your listening position too; the claim about accurate sound is the manufacturer’s.

ADAM Audio

The D3V is a compact stereo pair for a desk setup; the T5V and T7V are individual analogue nearfield monitors.

  • ADAM Audio lists a USB-C connection and balanced TRS inputs for the D3V. The T5V and T7V have rear-facing bass-reflex ports.
  • ADAM Audio states a lower limit of 45 Hz for the T5V and 39 Hz for the T7V, both at −6 dB. These figures alone don’t tell you what you’ll hear in your room. To connect a subwoofer to the D3V, ADAM Audio describes using an external audio interface and analogue connections.

Yamaha

The HS5 is an active 5-inch nearfield monitor for a setup with two separate speakers and suitable analogue outputs.

  • Yamaha specifies balanced XLR and TRS inputs, as well as ROOM CONTROL.
  • The stated lower limit is 54 Hz at −10 dB. Don’t compare this directly with specifications using a different dB measurement point, and check whether an offer includes one cabinet or a pair.

KRK

The ROKIT 5 Generation Five is an active 5-inch monitor sold individually, with various adjustment options.

  • KRK lists Mix, Focus and Create modes, plus 25 combinations of placement EQ and tuning.
  • These are the manufacturer’s specifications for this model; the settings don’t prove that correction will resolve the acoustics of every student bedroom.

Neumann

The KH 120 II is an individual DSP nearfield monitor to consider if room tuning is part of your setup.

  • Neumann recommends a listening distance of 1–2 metres and offers room tuning via MA 1.
  • Claims about accuracy and performance come from the manufacturer; the acoustic environment still matters with this monitor too.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

How should you set up two monitors for a stereo mix?

Aim both monitors at your listening position and try to place them symmetrically and at the same height. Genelec recommends a 60° angle between the monitors, with the listener at the apex of an equilateral triangle. Then assess how your desk, walls and furniture affect the sound.

Do you need a subwoofer for a theatre soundtrack?

Not necessarily. A subwoofer is mainly worth considering if you need to assess specific low-frequency effects and can manage its placement and setup. Genelec explains that placing it near a wall or in a corner can increase output without delivering the flattest response. You’ll also need to align its phase and crossover with the main monitors.

Can you easily add a subwoofer to USB-C monitors later?

It depends on the exact system. For the ADAM D3V, ADAM Audio describes connecting a subwoofer using an external audio interface and an analogue connection from the subwoofer to the TRS inputs.

What rights do you have if a product is faulty or you buy online in the Netherlands?

According to the Dutch government, there’s no fixed period for the statutory guarantee in the Netherlands: what you can expect from a product depends, among other things, on the product, its price and how it’s used. If a product is faulty, contact the seller. For online purchases from a business, you’ll generally have 14 days to change your mind; check which exceptions apply to your purchase.

Can you mix loudly at any time in a student bedroom?

There isn’t one nationwide permitted volume or time that applies to every student bedroom. The Dutch government states that noise nuisance between neighbours may be covered by local council regulations in many municipalities, and recommends agreeing on things such as when music can be played. Check local rules and any tenancy or house rules, and look after your hearing.

What product safety marking should you check on an electric monitor?

Check the product information and the marking on the item being offered. The Netherlands Food and Consumer Product Safety Authority (NVWA) states that CE marking is mandatory for products covered by the Commodities Act Decree on Electrical Equipment; the applicable rules depend, among other things, on the electrical design. A brand name alone doesn’t confirm that an individual product on offer meets the applicable requirements.