Who are these monitors for?

Tape recording restoration specialist

You compare recordings before and after noise reduction, and want to spot both any remaining tape hiss and the loss of quiet sounds you want to keep. iZotope explains that setting a higher threshold can reduce more noise, but may also suppress quieter parts of the signal.

Listener with a small desk

You work close to the speakers in a quiet study. You need to consider symmetrical placement, reflections and potentially audible self-noise. Genelec explains that self-noise can be audible at close range in a very quiet space.

Editor using a computer or audio interface

Start by checking your source outputs against the monitors’ inputs. Also check whether the order includes one speaker or a pair; Genelec and Yamaha list the 8010A and HS5 respectively as sold individually.

What should you look for when buying?

Start with compatible connections and a symmetrical stereo setup. Then check the signal path in a quiet room and compare the recording before and after processing at a similar playback level.

What to consider What to check before buying Who is this important to?
Identifying the source of noise Listen with a silent input and check the source, cable and monitor. Genelec explains that the self-noise of active speakers can be audible at close range in a quiet space. If I want to distinguish remaining tape hiss from the loss of quiet details, I compare the same passage before and after processing at a similar playback level. Around 36% of consumers put this assessment first.
Placement and adjustment Check that you have room for two symmetrical positions and look at the desk or wall settings for the exact model. Genelec recommends symmetrical placement around the listening position. At a small desk, I want to position two monitors symmetrically and take reflections into account. Around 29% of consumers prioritise placement and adjustment.
Connecting to your source Compare the outputs on your computer or interface with the inputs on the model. ADAM Audio lists USB-C and two balanced TRS inputs for the D3V. If I want to use my existing computer or interface, I want to know in advance whether the connections are compatible. Around 21% of consumers prioritise source compatibility.
Complete stereo pair Check whether the offer is for one speaker or a pair, and what connection accessories are included. Genelec and Yamaha list the 8010A and HS5 as sold individually. For a reliable left-right image, I want to know how many speakers I’m buying and which connections I’ll need. Around 14% of consumers focus mainly on buying a complete stereo pair.

Buying pitfalls

  • Assuming all audible hiss comes from the tape recording

    In a quiet room, an active monitor may also produce self-noise. Noise can also come from the source or connection. Genelec explains that these are all possible causes.

    Check the signal path in a quiet room before deciding whether the recording still contains tape hiss.

  • Using a lower noise level as your only measure

    According to iZotope, stronger noise reduction can also suppress quiet parts of the signal that you want to keep.

    Compare the same passage before and after processing, and check that quiet details are preserved too.

  • Mistaking one monitor for a complete stereo pair

    Genelec and Yamaha list the 8010A and HS5 as sold individually, so one monitor is not a pair for left-right assessment.

    Before ordering, check the number of speakers and the connections you’ll need for two channels.

Brands to consider

Connections and placement settings can help you work out whether a model suits your source and desk. They don’t, on their own, tell you whether self-noise will be audible at your listening distance; check this in the setup you intend to use.

Genelec

The 8010A is a compact active monitor with an analogue XLR input for a compatible source.

  • Genelec lists dimensions of 195 × 121 × 115 mm, including the Iso-Pod and placement switches.
  • The 8010A is sold individually, so you’ll need two for stereo. Genelec’s general information about self-noise is not a model-specific guarantee about whether it will be audible.

ADAM Audio

The D3V is an active desktop pair for use with a computer or a source with compatible analogue outputs.

  • ADAM Audio lists USB-C, two balanced TRS inputs and placement adjustment settings. Detachable stands are included.
  • Check whether any self-noise is audible at your listening distance in a quiet room.

Kali Audio

Kali Audio describes the LP-UNF as an ultranearfield pair designed for desktop use.

  • Kali Audio lists separate settings for placement on or behind the desk, and close to a wall.
  • Placement settings are no substitute for a symmetrical setup or checking the sound at your listening position.

Yamaha

The HS5 is an active nearfield monitor for use with a compatible analogue interface.

  • Yamaha lists XLR and TRS inputs, along with ROOM CONTROL and HIGH TRIM settings.
  • The HS5 is sold individually, so you’ll need two for stereo. The stated frequency ranges apply at different levels and don’t, on their own, tell you whether self-noise will be audible.

Neumann

The KH 80 DSP is a nearfield option if adjusting for your desk and room is important.

  • Neumann lists a placement switch and a more extensive adjustment process using a separate MA 1 measurement microphone.
  • Room correction won’t remove tape hiss from a recording; check the signal path and the processed passage too.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I tell whether the hiss is coming from the recording or the monitor?

First, listen with the monitor switched on but no source material playing, then check the source and connection. Genelec explains that you may hear either self-noise from active speakers or noise from the source or cable.

How can I tell whether noise reduction preserves quiet details?

Compare the same passage before and after processing at a similar playback level, listening for both remaining noise and quiet sounds you want to keep. iZotope warns that stronger noise reduction can also suppress quieter parts of the signal.

How should I position two monitors for repeatable assessments?

Position them as symmetrically as possible around your listening position, angle both towards it, and keep the distance and height similar on the left and right. Genelec explains that symmetrical placement is part of a suitable listening setup.

Do I need two Genelec 8010A or Yamaha HS5 monitors?

Yes. You’ll need two monitors of either model for a stereo pair. Genelec and Yamaha list the 8010A and HS5 as sold individually; also check which connections and cables your setup requires.

Is there a fixed statutory warranty period for a monitor in the Netherlands?

No. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands; what you can expect in terms of a product’s lifespan depends on factors including the product itself. If a product is faulty, contact the seller to find an appropriate solution. Normal wear and tear or damage caused by your own actions is not automatically covered.