Compact active monitors are suitable for assessing tape hiss in stereo if you can position two speakers and using speakers is appropriate for your shared office. Check quiet passages with headphones too when colleagues need silence or background noise makes assessment difficult. Also consider noise throughout the playback chain, positioning, connections and what’s included in the box.
Who is this option relevant for?
Audio restorer checking quiet hiss
Wants to compare untreated and processed tape recordings without mistaking noise from the speaker or playback chain for noise in the recording. Genelec Support also explains that the sound source itself can introduce noise; iZotope warns that stronger noise reduction can suppress quiet signal components.
Editor working alongside colleagues
Needs to agree on when and at what volume to check audio through speakers in a shared workspace, and wants the option to switch to headphones for quiet passages. Arboportaal notes that disruptive noise can also affect concentration at work.
Editor with a small shared desk
Has limited space for positioning equipment and wants to check that two monitors, the listening position and the connections will work with the desk and existing equipment. Genelec recommends an equilateral triangle as the ideal arrangement for stereo monitoring.
What should you look for when choosing?
Start by comparing your listening conditions and the complete playback chain. A stated frequency range alone won’t tell you whether you’ll hear more of the remaining tape hiss in your office.
| What to consider |
What to look for when buying |
Who is this important for? |
| Assessing quiet hiss |
Compare untreated and processed sections at the same playback level. If you can hear noise, check the source and signal chain too. |
If I want to know whether any quiet tape hiss remains without confusing it with noise from the monitor or source. Around 29% of consumers prioritise distinguishing tape hiss from chain noise and artefacts. |
| Avoiding disruption to colleagues |
Decide when it’s appropriate to check audio through speakers in the office, and whether you can easily switch to headphones. |
If colleagues need quiet, I want to know when I can work through speakers and when headphones would be more practical. Around 29% of consumers prioritise being considerate of colleagues. |
| Desk placement |
Measure to see whether two monitors will fit, and check the intended listening position and any settings for desk or wall placement. |
With a small desk, I want to be able to position two speakers neatly and symmetrically. Around 24% of consumers prioritise fitting equipment on their desk. |
| Connections and box contents |
Compare the inputs with the outputs on your computer or interface, and check that the box contains two monitors and the necessary connections. |
If I want to use my existing equipment, I want to know in advance whether I have everything I need for a complete stereo connection. Around 18% of consumers prioritise compatible connections and a complete set. |
Common buying mistakes
-
Mistaking all audible hiss for remaining tape hiss
An active monitor or connected sound source can also add noise, which you might wrongly attribute to the recording. Genelec Support describes both as possible causes.
Check a quiet playback chain separately, then compare the untreated and processed recording at the same playback level. Also listen for quiet details that may have been lost during noise reduction.
-
Mistaking one standalone monitor for a stereo pair
The Genelec 8010A is packaged individually, while Yamaha packages the HS4 as a pair.
Check the box contents for the exact variant and make sure you have two monitors and suitable connection cables.
For stereo, you’ll need a second monitor if you buy one individually. Also check whether the necessary cables are included.
-
Comparing frequency ranges without checking the measurement limit
The lower limit for the Genelec 8010A is specified at −6 dB, while the Yamaha HS4’s is specified at −10 dB. These figures are not directly comparable as measures of performance.
Check the dB measurement limit in the specification and assess positioning and audible noise separately. Don’t use frequency range figures to rank monitors for checking tape hiss.
Brands to consider for this use
ADAM Audio
ADAM Audio describes the D3V as a compact active desktop set with USB-C and balanced analogue TRS connections.
- ADAM lists detachable stands and switches for adapting the monitors to the room. According to the manufacturer, the internal DSP operates at 48 kHz/16-bit during USB playback.
- These specifications don’t measure how much noise the monitors themselves produce in your office. The USB format matters if you want to play higher-resolution files without alteration.
Yamaha
Yamaha describes the HS4 as a compact active monitor system, sold as a pair, with analogue inputs and a headphone output.
- The manufacturer lists ROOM CONTROL and HIGH TRIM controls for adjusting playback.
- The stated frequency response of 60 Hz–22 kHz is at −10 dB, so it isn’t a flat range. Check that the analogue inputs are compatible with your sound source.
Genelec
Genelec describes the 8010A as a compact, individually sold active monitor with one analogue XLR input.
- The manufacturer lists room compensation switches and dimensions of 195 × 121 × 115 mm, including the Iso-Pod.
- Each box contains one monitor, so you’ll need two for stereo. General information about self-generated noise isn’t a model-specific measurement for your setup.
Kali Audio
Kali Audio describes the LP-UNF as an ultra-nearfield system for desktop use, with a range of positioning settings.
- Kali lists USB-C, balanced TRS and unbalanced RCA connections.
- The manufacturer’s claims about clarity and stereo performance aren’t an independent measurement of how the system performs in a shared office.
IK Multimedia
According to the manufacturer, IK Multimedia designed the iLoud Micro Monitor Pro for compact monitoring, with built-in ARC X room calibration.
- IK lists analogue XLR and RCA inputs. A measurement microphone is mentioned with the Pair version.
- Check which variant is being offered: the measurement microphone isn’t necessarily included with an individually sold monitor. This doesn’t establish how well calibration will work in your room.
Joybuy products
Related products coming soon.
Frequently asked questions
Can I rely on studio monitors alone to tell whether tape hiss has been removed properly in the office?
Not in every situation: the monitors, sound source and surroundings can all add noise or mask quiet remnants. Compare treated and untreated passages, listen for quiet details that have disappeared or new artefacts, and use headphones too where necessary.
How should I position two monitors on a desk?
Aim both monitors at the same listening position and try to arrange them symmetrically. For stereo monitoring, Genelec describes a 60° angle and, ideally, an equilateral triangle. Also check the effect of nearby surfaces, and only use room settings if they apply to your chosen model.
Do I need to buy an audio interface or a second speaker?
It depends on your source and the monitor you choose: according to ADAM, the D3V has a USB-C input, while the Genelec 8010A has an analogue XLR input and is sold individually. Yamaha sells the HS4 as a pair. Check the connections, cables and box contents for the exact variant.
What if a monitor bought in the Netherlands develops a fault sooner than you could reasonably expect?
Consumer purchases are covered by the statutory guarantee, in addition to any manufacturer’s warranty. According to ACM ConsuWijzer, if a product is faulty under normal use and the applicable conditions, the seller must put it right free of charge, for example by repairing or replacing it. What you can reasonably expect depends on the product.
Is it acceptable to use speakers as long as the office stays below 80 dB(A)?
No, that conclusion doesn’t follow from workplace regulations. Arboportaal describes 80 dB(A) as the threshold for taking measures based on a daily noise exposure dose, assuming an eight-hour working day. It also notes that disruptive noise can pose a workplace risk, for example if it affects concentration. The threshold isn’t general permission to use speakers up to a particular instantaneous level.