Who are these studio monitors for?

Tape recording restorer

You want to assess any remaining hiss while checking that noise reduction hasn’t removed sounds from the original recording. Springer describes preserving the original recording as one aim of audio restoration, while iZotope cites tape hiss as an example of broadband noise.

Desk worker with a small listening space

You assess recordings in a home office where the available space and the position of your desk, walls and listening spot all play a part. Genelec stresses that placement and the room affect what you hear.

Creator with an audio interface

You want a repeatable stereo setup that connects to your equipment’s outputs and lets you keep a record of your settings. Product information from Yamaha, JBL and KRK lists various connections and adjustment options.

What should you look for when choosing?

Start with the room and listening position, then check the connections and what’s included in the set. Finally, choose settings you can keep the same when making comparisons.

What to consider What should you check? Who should prioritise this?
Hiss and preserving the recorded sound Compare the same section before and after processing, from the same listening position and at a similar playback volume. I want to hear whether the hiss has been reduced without losing wanted detail. Around 40% of consumers cite critical assessment of hiss and preservation of recorded sound as their main buying priority.
Room and placement Measure the available space and plan two matching positions in relation to your listening spot, taking the desk and walls into account. If my home office has limited space, I want to be able to position two monitors symmetrically. Around 30% of consumers cite placement in a small listening space as their main buying priority.
Connections and what’s included Check that your audio interface’s outputs are compatible with the model’s inputs, and whether the order includes one monitor or a pair. I want to know whether I can connect my source to both monitors and what’s included in the order. Around 15% of consumers cite connections and what’s included as their main buying priority.
Consistent listening settings Check which EQ or listening modes are available, and note the setting you choose when making comparisons. If I want to repeat my assessments, I need to be able to keep the settings the same. Around 15% of consumers cite repeatable tuning as their main buying priority.

Which pitfalls can you avoid?

  • Assuming a larger woofer makes tape hiss easier to hear

    Manufacturers specify frequency limits using different measurement definitions. The room and placement also affect what you hear from your listening position.

    Only compare frequency specifications when the dB definition is the same, and check that the monitors will suit your room.

    A larger cabinet may take up more space and make placement trickier, without any proven benefit for this task.

  • Assuming an offer includes a stereo pair

    Yamaha’s European product information lists the HS5 as a single unit. Don’t assume you’ll receive two monitors based on a picture or product name.

    Check the quantity and what’s included in the offer before putting together a stereo setup.

    A stereo setup may require a second monitor and suitable connecting cables.

  • Seeing room EQ as a substitute for good placement

    Reflections and the positions of the monitors and listener affect what you hear, even if a model has adjustable EQ.

    Position the monitors symmetrically first, then note your EQ settings so you can keep them consistent when making comparisons.

    You may need to spend time repositioning the monitors or adjusting your listening space.

Which brands are worth considering?

Genelec

The 8010A is an example for a very compact workspace; the manufacturer lists its small dimensions and one XLR input per monitor.

  • Genelec specifies dimensions of 195 × 121 × 115 mm, including the Iso-Pod, and a frequency response of 67 Hz–25 kHz at −6 dB.
  • These specifications don’t tell you whether the 8010A will make residual tape hiss easier to hear in your room.

Yamaha

Yamaha describes the HS5 as an active 5-inch nearfield monitor with ROOM CONTROL, HIGH TRIM, and XLR and TRS inputs.

  • Yamaha Music Europe lists 74 Hz–24 kHz at −3 dB, as well as 54 Hz–30 kHz at −10 dB. Be sure to distinguish between these measurement definitions.
  • Yamaha lists the HS5 as a single unit. So, if you want to listen in stereo, check how many monitors are included in the offer.

JBL

According to JBL, the JBL 305P MkII features Boundary EQ, a three-position HF Trim and balanced XLR and TRS inputs.

  • These adjustment options let you tailor the sound to your setup.
  • Having these features doesn’t prove that the model will make tape hiss easier to assess in your home office.

KRK

KRK describes the ROKIT 5 Generation Five as an active 5-inch monitor with several listening modes and adjustable boundary and EQ combinations.

  • KRK says Mix, Focus and Create modes are available, alongside 25 combinations of boundary and EQ settings.
  • Having more adjustment options doesn’t prove that a setting will completely resolve problems in your room.

ADAM Audio

The T7V is a larger nearfield alternative for anyone who also wants to assess the low end and has enough space for placement.

  • ADAM Audio specifies a 7-inch woofer and a frequency response of 39 Hz–25 kHz at −6 dB.
  • The T7V has a rear-facing bass reflex port. Its stated frequency response alone doesn’t prove that you’ll be able to assess subtle tape hiss more easily.

Related products

Related products coming soon.

Frequently asked questions

Can I just put the monitors on my desk and compare them straight away?

First, set up two matching listening positions in relation to where you’re sitting. Genelec recommends a 60° angle between the monitors for stereo, with both aimed at the listening position. It also points out that the room and placement affect what you hear. This placement advice doesn’t guarantee that every home listening space will sound acoustically neutral.

How can I make noise reduction assessments repeatable?

When comparing the same section before and after processing, use the same listening position, a similar playback volume and the same monitor settings. Listen for both residual hiss and the preservation of wanted sounds; preserving the original recording is one aim of audio restoration. This is a way to make comparisons, not a proven performance claim for a specific monitor model.

How can I avoid accidentally buying just one speaker?

Check the quantity and contents of the exact offer. Yamaha Music Europe lists the HS5 as a single unit, so don’t assume you’re getting a pair based on a product photo or the word ‘monitor’.

Which product requirements should I check for an active monitor in the Netherlands?

Electrical equipment sold in the Netherlands must meet the applicable European requirements for safety and electromagnetic compatibility. Business.gov.nl explains that, for equipment covered by these requirements, CE marking and an EU declaration of conformity are among the obligations. Check the documentation for the version on offer; CE marking is not a certification of sound quality.

Will listening at a higher volume help me hear the last of the tape hiss?

Turning up the volume is no substitute for a quiet, consistent listening setup. The World Health Organization stresses that the risk to your hearing depends on both the sound level and how long you’re exposed to it. Keep the volume moderate and take listening breaks. This isn’t a recommended calibration level for studio monitors.