Who are these monitors for?

Listeners checking tape hiss

You compare short clips before and after noise reduction, and want to assess both the remaining hiss and any changes to the wanted sound. The Audacity guide describes tape hiss as a type of constant background noise that can be reduced using noise reduction.

Creators with two screens on their desk

You need space for a stereo pair around two screens, so you’re considering dimensions, clear line of sight and a symmetrical listening position. Genelec and PreSonus offer studio monitor placement advice.

Editors with a fixed audio setup

Your choice also depends on the outputs on your computer or audio interface. Check that the inputs, cables required and number of speakers included suit your setup.

What should you look for when choosing?

Compact desktop set

Choose this option: if your two screens leave little desk space and you can aim both speakers freely at your listening position.

Trade-off: The IK Multimedia iLoud Micro Monitor comes as a pair and lists RCA and 3.5mm inputs; the Kali LP-UNF also lists balanced TRS and USB-C. Check which connection suits your audio source.

Separate active nearfields

Choose this option: if there’s enough space beside or behind your screens for two separately positioned speakers.

Trade-off: Compare the connections you need and the available depth. Yamaha lists the HS5 individually, while the stated frequency limits of different models aren’t always based on the same measurement method.

Adjust your setup first

Choose this option: if your screens block the direct sound path or make symmetrical positioning impossible.

Trade-off: A different screen layout or suitable stands take up extra space and may require additional equipment; positioning controls can’t make up for an obstructed sound path.

What to consider What to look for Who should consider this?
Audibility of residual tape hiss Listen to the same clip from your usual listening distance before and after processing; also compare a quiet clip. Frequency range and power ratings don’t measure audible self-noise at your workstation. If your main aim is to assess what remains after noise reduction and what happens to the wanted sound, listening in your own setup is important. Around 33% of consumers put audibility first.
Positioning beside two screens Measure the available width and depth on both sides. Check that the screens don’t block the sound path and follow the positioning instructions for the exact model. If your desk is already full, the stereo pair needs to point freely and as symmetrically as possible towards your ears. This matters to around 27% of consumers who prioritise positioning.
Connecting to your audio source Compare the stereo outputs on your computer or interface with the inputs on the exact monitor model, and check which cables are included. If you want to keep using an existing computer or interface connection, the available inputs and outputs will help determine which setup is practical. Around 20% of consumers prioritise connectivity.
What’s included in the stereo pair Check whether the packaging contains one monitor or a pair, and which power supplies and connecting cables are included. IK lists two speakers for the iLoud Micro Monitor; Yamaha lists the HS5 individually. If you need a complete stereo pair straight away, check in advance how many speakers and what accessories are included with the version you choose. Around 20% of consumers prioritise a complete set.

Common buying mistakes

  • Assuming a frequency limit proves that residual tape hiss will be audible

    Manufacturers use different measurement limits, including −6 dB and −10 dB. These specifications aren’t directly comparable measurements of self-noise at your listening position.

    Compare frequency specifications only when you know how they were measured, and assess self-noise and your before-and-after clips separately.

  • Leaving two screens between the speakers and your ears

    An obstructed sound path or uneven positioning makes it harder to use your setup as a consistent listening reference. Genelec and PreSonus provide positioning and orientation guidance.

    Plan the position of your screens, monitors and listening spot in advance, then check that both speakers can point freely towards your ears.

    A different layout or suitable stands may take up extra space.

  • Assuming a single HS5 is a complete stereo set

    Yamaha lists the HS5 individually, while IK states that the iLoud Micro Monitor package contains two speakers.

    Before buying, check how many speakers are included and what’s in the box rather than comparing model names alone.

    You may need a second speaker for stereo; also check whether the necessary connecting cables are included.

Brands to consider

Kali Audio

Kali says the LP-UNF is designed for desktop mixing and lists settings for desk, wall and stand placement.

  • Kali lists USB-C, balanced TRS and unbalanced RCA.
  • Kali’s claims about clarity and portability are manufacturer claims, not independent comparisons of audible tape hiss or self-noise.

IK Multimedia

The iLoud Micro Monitor is a compact active set which, according to IK, is supplied as a pair.

  • IK lists dimensions of 180 × 135 × 90 mm per speaker, desktop settings, and RCA and 3.5mm inputs.
  • The cited specifications don’t list a balanced audio input. The 45 Hz–22 kHz range is specified at −10 dB and isn’t a measurement of self-noise.

Genelec

The 8010A is a small active monitor for workspaces where separate speakers are difficult to accommodate; Genelec also offers placement advice.

  • Genelec lists dimensions of 195 × 121 × 115 mm including Iso-Pod, and 67 Hz–25 kHz at −6 dB.
  • Claims about accuracy come from the manufacturer. The dimensions and frequency limit don’t prove an advantage for assessing this tape-hiss task.

JBL Professional

The 305P MkII is an active 5-inch nearfield monitor for anyone with room for separate speakers.

  • JBL lists Boundary EQ, HF Trim, and balanced XLR and TRS inputs.
  • JBL’s claims about a wide listening area and accuracy aren’t an independent test of how well the monitor lets you assess tape hiss.

Yamaha

The HS5 is an active 5-inch nearfield monitor with ROOM CONTROL and HIGH TRIM, for a setup with space for two separate cabinets.

  • Yamaha lists XLR and TRS inputs, and a frequency range of 54 Hz–30 kHz at −10 dB.
  • Yamaha lists the HS5 as sold individually. The frequency specification doesn’t compare self-noise between brands; check how many speakers you need for stereo.

Joybuy products

Related products will be available soon.

Frequently asked questions

How can I tell whether tape-hiss reduction is removing too much of the recording?

Compare short sections before and after processing from the same listening position and at the same playback level, including a section with only the original hiss. The Audacity guide describes tape hiss as a form of constant noise that can be reduced using noise reduction; this doesn’t prove that a particular speaker will make the result easier to hear.

Can I lay the speakers horizontally beneath two screens?

Check the manual for the exact model. PreSonus warns that horizontal placement can worsen the stereo image on many studio monitors; aim the speakers at your listening position and use only an approved orientation.

What should I adjust once the monitors are in place?

Start with a clear sound path and distances to your ears that are as symmetrical as possible. Then use any model-specific placement or tone settings, such as the desk settings on the Kali LP-UNF or Boundary EQ on the JBL 305P MkII. These won’t replace a well-planned basic setup.

What are my rights when buying online in the Netherlands?

According to the Dutch government, when you buy at a distance you’ll generally have 14 days to change your mind, although exceptions and the specific order terms still apply. If a product is faulty, the seller is your point of contact for the statutory guarantee, even if a manufacturer’s guarantee also applies.

What product regulations must an active monitor meet for the Dutch market?

Electrical equipment must be safe and comply with the regulations that apply to the specific model. According to Dutch government information, electrical and electronic products may be subject to EU rules on low voltage, electromagnetic compatibility and RoHS, among others. Check which requirements and conformity information apply to each product on offer; a CE mark says nothing about sound quality.