Who is this for?

Tape recording restoration specialist

You compare unprocessed and processed audio and want to avoid confusing residual hiss with processing artefacts or noise from the playback chain. iZotope describes tape hiss as broadband noise; Genelec points out that a sound source or loudspeaker can also produce hiss.

Editor at a standing desk

You listen from a fixed position at standing height and want to be able to angle both monitors towards it. Genelec recommends pointing monitors towards the listening position; symmetry and reflections from your desk and room also play a part.

Editor with limited desk space

You want to connect a suitable stereo setup without discovering later that you need a second monitor, different outputs or extra cables. So check both the connections and what’s included in the box.

What should you look for?

Compact active desktop set

A good fit if: you’re short on space and want a set that connects to your computer or audio equipment. ADAM Audio lists USB-C and balanced TRS inputs for the D3V; Kali Audio lists USB-C, TRS and settings for different desk positions on the LP-UNF.

Trade-off: settings and compact placement don’t guarantee that reflections or self-noise won’t affect what you hear at your listening position.

Two separate nearfield monitors

A good fit if: you want to position the left and right monitors separately and have suitable outputs. Genelec lists an XLR input and Iso-Pod for the 8010A; check whether you need two units for stereo in the exact version you’re considering.

Trade-off: you’ll need two monitors and suitable connections; small dimensions alone say nothing conclusive about how clearly you’ll hear tape hiss.

What to consider What should you check? Who is this important for?
Residual noise and artefacts Compare passages before and after processing from the same listening position. Also listen when no audio is playing and check the source and playback chain; iZotope and Genelec describe possible causes of recording and monitor hiss. If you assess quiet passages, you’ll want to distinguish monitor noise from noise in the recording. Around 33% of consumers prioritise assessing residual noise and artefacts.
Positioning at standing height Check whether you can angle both monitors towards your listening position and whether they can be placed symmetrically. Genelec emphasises pointing them towards the listening position; Kali Audio describes placement settings for different desk positions. When listening at a standing desk, you’ll want to angle both monitors correctly and take desk reflections into account. Around 27% of consumers prioritise a setup at their own listening height.
Connecting to your equipment Compare the outputs on your computer or audio interface with the inputs on the exact model. ADAM Audio and Kali Audio list USB-C and TRS for the models mentioned; also check the cables and compatibility with your own equipment. If you want to use your existing computer or interface, you’ll want to know in advance whether the connections are compatible. Around 20% of consumers prioritise connectivity.
Complete stereo pair Check how many monitors are included and which cables or stands you’ll need. A monitor sold individually does not, by itself, make a stereo pair. If you want to assess stereo material, you’ll need both left and right channels and will want to know which parts are still missing. Around 20% of consumers prioritise a complete stereo system.

Common buying mistakes

  • Mistaking monitor hiss for residual tape hiss

    During quiet passages, noise can come from the monitor or the source, as well as from the recording itself. Genelec describes both possibilities.

    Listen to a quiet passage before and after processing, then separately check what you hear when the source isn’t playing any audio.

  • Ordering one monitor when you need stereo

    A box may contain one monitor or a pair. Check the contents of the exact version and make sure the connections suit your equipment.

    Before buying, check how many monitors are included and which cables or stands your setup requires.

    You may need a second monitor or suitable cables and stands to complete your stereo setup.

  • Expecting desk EQ to fix poor positioning

    Direction, symmetry and reflections from your desk and room affect what you hear at the listening position. A placement setting is no substitute for angling and positioning the monitors correctly.

    First establish their positions at standing height, then use any placement controls to fine-tune the sound.

    If placing the monitors on your desk doesn’t work, you may need suitable stands.

Relevant brands for reference

ADAM Audio

According to ADAM Audio, the D3V is a compact desktop set with USB-C and balanced TRS inputs.

  • ADAM Audio lists detachable feet, mounting points and placement controls for the D3V.
  • These features don’t provide an independent assessment of audible self-noise at your listening distance.

Kali Audio

According to Kali Audio, the LP-UNF is a stereo set for a desk, with several connections and placement settings.

  • Kali Audio lists USB-C, TRS and RCA, as well as settings for different desk and wall positions.
  • The settings don’t guarantee that reflections or self-noise will be inaudible at your listening position.

Genelec

The 8010A is a compact active monitor designed for individual placement.

  • Genelec specifies an XLR input and Iso-Pod for the 8010A.
  • Check the exact version and whether you need one or two monitors for stereo.

PreSonus

The Eris 3.5 2nd Gen is a compact stereo set with several analogue inputs.

  • PreSonus lists balanced TRS, RCA and 3.5mm inputs, plus a headphone output.
  • The stated frequency response of 80 Hz to 20 kHz has no directly comparable dB basis in the product information; don’t infer an advantage for checking noise from it.

JBL Professional

The 305P MkII is a single active monitor with balanced analogue connections and placement adjustment options.

  • JBL lists Boundary EQ, HF Trim, XLR and TRS for this model.
  • Claims about soundstage and accuracy come from the manufacturer and don’t demonstrate a performance advantage when removing tape hiss.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I tell whether the hiss is coming from the recording or the monitor?

Listen to a quiet passage before and after processing, and also check what you hear when the source isn’t playing any audio. Genelec explains that both an active loudspeaker and the sound source can produce hiss; this doesn’t give a self-noise figure for any specific model.

How should I position monitors when I’m standing?

Angle both monitors towards your listening position at standing height, starting with a setup that’s as symmetrical as possible. Genelec gives a 60-degree angle as a starting point; also check for reflections and make sure the stands are stable. Assess a second desk height separately if you use one.

Do I need anything else besides the monitors?

That depends on what’s included and the equipment you have. Check whether you’re buying a pair or a single monitor, whether your source has suitable outputs, and which cables or stands you’ll need.

What are my rights when buying online in the Netherlands?

For eligible online purchases from a business, the Dutch government generally provides a 14-day cooling-off period. Faulty products are covered by the statutory guarantee; there is no fixed statutory guarantee period in the Netherlands. Also check the terms of any additional retailer or manufacturer’s guarantee.

What should I check for product safety with an active monitor?

Check the EU version and the product information for the exact model. The Netherlands Enterprise Agency describes CE marking and applicable EU rules for electrical and electronic equipment, including exceptions and rules that can vary by product.