Who is this choice relevant to?

Cassette restorer with limited mains sockets

You compare an unprocessed recording with the version after noise reduction, while also needing to power your equipment. Check the power supply and cable routing for the complete stereo set. IK Multimedia’s manual describes the original iLoud Micro Monitor set as having a single power supply.

Editor checking for subtle side effects

You want to assess whether wanted sounds have been affected, as well as checking for any remaining tape hiss. Compare the same passage in the same listening position and, if needed, use headphones as a second check. The Audacity Development Manual describes listening to the removed sound as a way to help with this assessment.

Computer-based editor with a compact workspace

You have limited desk space and want to connect the monitors to your computer or existing audio interface. Compare the connections and the space needed for both speakers, not just the dimensions of one cabinet. ADAM Audio describes USB-C and balanced TRS inputs for the D3V; Edifier lists balanced TRS inputs for the MR4.

What should you look for when buying?

First check the power supply and cable routing, then match the audio inputs to your source and keep your listening comparisons consistent.

What to consider What should you check? Who is this important for?
Number of mains connections Check how many power supplies the complete set needs, where they plug in and whether the speaker cable is long enough for your intended setup. If I have few spare mains sockets, I want to know how many power supplies the whole set needs. That’s why around 33% of consumers prioritise the number of mains connections.
Noise and processing side effects Compare the same passage before and after processing at the same volume, keeping any sound settings unchanged. If I want to assess subtle changes caused by noise reduction, I need a repeatable listening comparison. Around 27% of consumers make this check their top priority.
Connection to the audio source Compare the outputs on your computer, cassette deck or audio interface with the inputs on the exact model, and check which cables you already have. If I want to use my existing computer or audio interface, the connection needs to be suitable so I can plan my setup accurately. Around 20% of consumers start by checking compatibility with their audio source.
Positioning two speakers Measure the available space for both cabinets and check their dimensions and the length of the connecting cable. If my desk has limited space, I first need to check whether I can position both speakers effectively. Around 20% of consumers make stereo positioning their main buying concern.

Common buying mistakes

  • Assuming that two active speakers always need two mains plugs

    According to IK Multimedia, the original iLoud Micro Monitor set comes with two speakers, one power supply and a connecting cable. The setup varies from one system to another.

    Check how many power supplies come with the exact set, where the connection is and whether the cable between the speakers suits your setup.

  • Taking the lowest stated Hz figure as proof of better noise monitoring

    The stated lower limit of 45 Hz for the original iLoud Micro Monitor is at −10 dB. This does not prove that the response is flat at that frequency, nor does it tell you on its own whether processing artefacts will be audible.

    Check the measurement conditions for the frequency range and compare the processed and unprocessed recording using the same listening settings.

  • Changing a sound mode or tone control without noticing during a check

    Edifier distinguishes between monitor and music modes; Mackie describes a tone control that changes the amount of bass and treble. Changing the settings makes a before-and-after comparison less consistent.

    Note the mode and listening volume you use, and keep them the same for both versions.

Brands to consider

IK Multimedia

The original iLoud Micro Monitor is a compact analogue stereo set worth comparing if power supply and desk space are important considerations.

  • IK Multimedia lists two speakers, one power supply and a 2-metre speaker connecting cable.
  • The stated lower limit of 45 Hz is at −10 dB; this is not an independent listening test. Don’t confuse this model with the Micro Monitor Pro.

ADAM Audio

The D3V is a desktop set to consider if USB-C playback or balanced analogue connections suit your workspace.

  • ADAM Audio lists USB-C, two TRS inputs and placement adjustments. The manufacturer specifies a 2-metre connecting cable.
  • The specifications are not an independent test of whether noise-reduction artefacts are audible.

Edifier

The MR4 is an active/passive analogue stereo set worth comparing if this configuration and the available connections suit your desk.

  • Edifier lists balanced TRS inputs, a headphone output, and monitor and music modes.
  • The sound description comes from the manufacturer. Check the power supply and positioning for the version on offer.

PreSonus

The Eris 3.5 2nd Gen is described as an analogue pair to compare with other desktop systems.

  • PreSonus lists TRS, RCA and 3.5 mm inputs, a headphone output and a stated frequency range starting at 80 Hz.
  • This is not the Eris 3.5BT. Check the conformity documentation for the exact version on offer.

Mackie

The CR3.5 Gen 3 is a desktop set to compare if you want adjustable sound for other uses as well as for monitoring.

  • Mackie describes a tone control, a placement switch, analogue inputs and a headphone output.
  • The claim of a flat response at a particular control setting comes from the manufacturer and is not an independent listening measurement.

Joybuy products

Related products coming soon.

Frequently asked questions

Should I assess tape hiss using speakers alone?

No. Compare the recording before and after processing, and listen through headphones too if you wish. The Audacity Development Manual also recommends listening to the sound removed by noise reduction; this can help you spot whether wanted sounds have been affected.

How can I avoid underestimating the cable run?

First decide where both speakers will go, compare your available audio outputs with the inputs, then check the power supply and connecting cable. ADAM Audio specifies a 2-metre speaker connecting cable for the D3V; that length does not automatically apply to other sets.

Who can I contact in the Netherlands if a set is faulty?

Contact the seller. According to the Dutch government, consumers are entitled to a product that works properly, and there is no fixed statutory warranty period in the Netherlands. The appropriate solution depends on the circumstances and the product’s expected use.

Which product requirements apply to studio monitors in the Netherlands?

Electrical and electronic equipment must meet the applicable European product requirements. Business.gov.nl explains the required CE marking; also check the EU Declaration of Conformity for the exact version. Edifier’s declaration dated 9 June 2021 specifically names EDF100024 (MR4) and is not proof of conformity for other models or versions.