Who is this buying guide for?

Student who wants to compare takes critically

You want to assess differences between recordings from a fixed listening position. Genelec recommends a symmetrical monitor setup as a starting point.

Student in a small shared room

If your desk has limited space and you can’t always use speakers, size, positioning and the option to use headphones all matter.

Student setting up their first audio system

You want to know whether you’re buying a pair or individual monitors, and whether the connections and included cables are compatible with your audio source. PreSonus, Yamaha and Genelec list different package contents.

What should you look for?

Start with your listening position and the space available. Then check what’s in the box and which connections are available before comparing tone controls or stated frequency ranges.

What to consider What should you check? Who is this important for?
Hearing differences between takes Can you position both speakers at an equal distance from your listening position and angle them towards you? Only compare frequency specifications if they use the same measurement method. If I want to compare takes, I want to listen to both speakers from a fixed position in a symmetrical setup. Around 36% of consumers prioritise hearing differences between takes.
Listening in a shared room When can you use speakers, do you have a headphone output, and where can you set up a permanent listening position? In a shared room, I want to be able to work without disturbing my housemates with speakers, while keeping the setup within the space available on my desk. Around 29% of consumers prioritise listening in a shared room.
A stereo pair on a small desk Check how many speakers are included and whether their dimensions will fit your desk and equipment. With a small desk, I want to know in advance whether I’ll get a stereo pair and whether both speakers will fit. Around 21% of consumers prioritise a compact, complete stereo setup.
Connecting to your audio source Compare the outputs on your audio interface or computer with the monitor inputs, such as TRS, XLR, RCA or 3.5 mm. Also check which cables are included. If I want to connect my existing audio source, I check which cable and input I need. Around 14% of consumers make source compatibility their main buying concern.

Common buying mistakes

  • Assuming a single monitor is a stereo pair

    Package contents vary by model: PreSonus describes the Eris 3.5 2nd Gen as a pair, while Yamaha lists one HS5 monitor per box and Genelec lists one 8010A per box.

    Check whether the exact model comes with one speaker or a pair, and make sure the included cables are suitable for your audio source.

  • Comparing frequency ranges without checking how they’re measured

    Manufacturers state frequency limits at different measurement levels, such as −3 dB, −6 dB and −10 dB. Your room also affects what you hear from your listening position.

    Only compare specifications that use the same measurement method, and take the positioning in your room into account.

  • Assuming room EQ can fix poor positioning

    Walls and furniture affect the sound. Genelec warns that calibration may not be enough to resolve every acoustic issue.

    First, plan a listening position that’s as symmetrical as possible. Then use the monitor settings to make further adjustments.

Brands to compare

PreSonus

On its European product page, PreSonus describes the Eris 3.5 2nd Gen as a compact pair suitable for use in a bedroom studio, among other settings.

  • According to PreSonus, this model has TRS, RCA and 3.5 mm inputs, a front-mounted headphone output and included cables.
  • The stated frequency response starts at 80 Hz; that figure alone doesn’t tell you how accurately the bass will sound in your room.

Yamaha

The Yamaha HS5 is an active 5-inch nearfield monitor from the HS series, sold individually.

  • Yamaha specifies XLR and TRS inputs, along with ROOM CONTROL and HIGH TRIM controls.
  • You’ll need two monitors for a stereo setup. The stated 54 Hz limit at −10 dB uses a different measurement method from figures given at, for example, −6 dB.

JBL

The JBL 305P MkII is an active 5-inch studio monitor with separate controls for low frequencies and high frequencies.

  • JBL specifies balanced XLR and TRS inputs, as well as Boundary EQ.
  • The stated settings can’t predict how the monitor will sound in your room. Don’t compare monitors on frequency figures alone.

ADAM Audio

ADAM Audio positions the T5V as a 5-inch nearfield monitor for small control rooms.

  • ADAM Audio lists a stated frequency response from 45 Hz at −6 dB.
  • The bass reflex port is at the rear, so allow for the space available behind the monitor. The stated figure isn’t a measurement of how it will sound in your room.

Genelec

The Genelec 8010A is a very compact active monitor sold individually.

  • Genelec specifies one analogue XLR input per monitor.
  • The box contains one monitor, so you’ll need two for stereo. The stated lower limit of 67 Hz is measured at −6 dB.

KRK

The KRK ROKIT 5 Generation Five is an active 5-inch monitor sold individually.

  • KRK lists Mix, Focus and Create modes for this model, along with 25 combinations of positioning and tone controls.
  • You’ll need two speakers for stereo. Check that the settings suit your room and the way you work.

Products at Joybuy

Related products coming soon.

Frequently asked questions

How should I position two monitors to compare takes?

Position both speakers at an equal distance from your listening position and angle them towards you. Genelec recommends starting with a symmetrical setup, with a 60° angle between the speakers; your desk and room will affect the final result.

Can built-in EQ fix every problem in a small room?

No. The monitor settings won’t automatically resolve every acoustic issue. Genelec notes that calibration may not be enough, so start by choosing the most suitable positioning you can.

Should I order one speaker or two?

It depends on what’s included with the exact model. PreSonus describes the Eris 3.5 2nd Gen as a pair, while Yamaha lists one HS5 per box and Genelec lists one 8010A per box. Check the product listing before putting together a stereo setup.

What happens in the Netherlands if a monitor develops a fault?

When you buy as a consumer, the product must meet reasonable expectations, and the seller is your point of contact if it’s faulty. According to the Dutch government, the Netherlands has no fixed statutory warranty period; a manufacturer’s warranty comes in addition to your statutory rights.

Is CE marking the same as a quality mark?

No. Business.gov.nl explains that CE marking isn’t a quality mark. According to Your Europe, the mark is only required for products covered by EU rules that specify it. Check the relevant product documentation for the model you’re considering.