For comparing recordings in a student room, two suitably positioned monitors are useful, but they don’t measure a recording’s loudness. For that, use a loudness meter as well as a consistent listening level. On a small desk, key considerations include symmetrical positioning, suitable connections and checking whether you’re buying one monitor or a pair. EBU R 128 is a recommendation for broadcast production, not a mandatory listening level for every student.
Who are these monitors for?
Students comparing recordings at the same level
You want to judge differences between recordings when editing, producing or mixing, without automatically assuming that a louder recording sounds better. A consistent listening level and a separate loudness measurement can help; the EBU recommends measuring average programme loudness when normalising audio signals.
Creators with limited desk space
You need to position two speakers appropriately and symmetrically, while taking the effects of your desk and room into account. Genelec describes symmetrical positioning as the starting point for monitor placement.
Students buying a complete set
You want to know in advance whether an offer includes one monitor or a stereo pair, and which connections or calibration components come with the version you’ve chosen. Bundle contents can vary by version; for example, IK Multimedia lists the measurement microphone as included with the pair version of the iLoud Micro Monitor Pro.
What should you look for when choosing?
Start by considering how you’ll compare recordings at the same perceived level. Then work out what will fit on your desk, and finally check that you’re buying a complete pair with suitable connections.
Compact stereo pair with calibration
A good fit if: you have limited desk space or regularly move your setup.
Bear in mind: calibration doesn’t replace careful, symmetrical positioning; also check whether the offer you’ve chosen includes a pair.
Pair for desk and media use
A good fit if: you’re looking for a set sold as a pair for desk use, as well as for comparing recordings.
Bear in mind: according to PreSonus, the Eris 5BT 2nd Gen has Bluetooth, but Bluetooth won’t automatically match the loudness of recordings.
Two separate nearfield monitors
A good fit if: you can position two separate active monitors symmetrically and want to choose them individually.
Bear in mind: ADAM Audio A4V and Genelec 8020D offers in the Netherlands are sold individually, so allow for two monitors and suitable connections.
| What to consider |
What should you check? |
Who is this important for? |
| Comparing levels |
Use a repeatable listening level and measure the loudness of recordings separately; EBU R 128 is about broadcast normalisation. |
If I’m using editing or mixing to judge differences, I don’t want a louder recording to seem better just because it’s louder. Consumers who mainly compare recordings at the same level account for around 33% of consumers with this buying need. |
| Desk positioning |
Measure the available space and check whether both monitors can be positioned at the same height and distance; also consider the effects of your desk and room. |
With limited desk space, I want to be able to point two monitors symmetrically towards my listening position; Genelec describes this as the starting point for positioning. Consumers who mainly consider setup and space account for around 27% of these consumers. |
| Complete stereo system |
Check whether the offer includes one monitor or a pair, which inputs are available and what’s included in the bundle. |
If I want to buy one complete set, I want to know before ordering whether I have enough speakers for left and right, and the right connections. Consumers who mainly look for a complete set with suitable connections account for around 20% of these consumers. |
| Bass and shared spaces |
Only compare frequency ranges when the measurement tolerances match, and assess the sound at your own listening position. |
In a shared room, I want to assess the bass without relying solely on a stated frequency limit, and listen at a sensible level. Consumers who prioritise bass reproduction and listening in a shared space account for around 20% of these consumers. |
Common buying mistakes
-
Assuming a per-unit price is for a stereo pair
An offer for one monitor won’t automatically give you the two speakers you need for stereo playback.
Check the sales unit and bundle contents before comparing offers. With monitors sold individually, you may need a second speaker and suitable cables.
For the iLoud Micro Monitor Pro, IK Multimedia lists the measurement microphone as included with the pair version; don’t assume it comes with an offer for a single monitor.
-
Assuming a lower Hz figure proves better bass
Frequency ranges aren’t directly comparable when the stated measurement tolerances differ. Your room also affects what you hear at your listening position.
Compare the measurement basis and tolerance, and assess the sound where you’ll be listening.
-
Assuming room correction is a substitute for good positioning
Monitor placement affects what you hear. Calibration or adjustable EQ won’t automatically remove that effect.
First position the monitors as symmetrically as possible, then check which calibration components are included with your version.
Relevant brands to compare
These examples apply to the product ranges and versions named here. A brand mention isn’t an endorsement of the entire brand, nor does it mean every model is sold as a stereo pair.
IK Multimedia
The iLoud Micro Monitor Pro is a compact option for a small desk. IK Multimedia lists built-in ARC X calibration.
- According to IK Multimedia, the pair version comes with a measurement microphone.
- An offer for a single monitor isn’t automatically a stereo pair or the same bundle as the pair version.
KRK
According to KRK, the GoAux 4 is a portable nearfield pair; the ROKIT 5 Generation Five is a range of monitors sold individually.
- KRK sells the GoAux 4 as a pair.
- Check whether your chosen range is sold as one monitor or a pair; features of one model don’t automatically apply to another.
PreSonus
The Eris 5BT 2nd Gen is a stereo pair, while the Eris Studio 5 is a different model sold individually.
- PreSonus lists Bluetooth for the Eris 5BT 2nd Gen.
- The adjustment controls on the Eris Studio 5 aren’t automatically included on the Eris 5BT.
ADAM Audio
According to ADAM Audio, the A4V is designed for close listening distances and small studio spaces.
- ADAM Audio describes model-specific controls for the effects of desks and rooms.
- The Dutch offer is for one monitor; its controls don’t prove that the room is fully corrected.
Genelec
The 8020D is a compact active monitor for a small setup.
- Genelec lists an energy-saving standby mode for the 8020D.
- The Dutch offer is for one monitor and lists XLR as the input; check what you’ll need for two speakers.
Joybuy products
Related products will be available soon.
Frequently asked questions
Will new studio monitors automatically make recordings play at the same level?
No, monitors don’t automatically measure the loudness of recordings. Use a consistent playback level and measure average programme loudness separately. EBU R 128 recommends loudness measurement for normalising broadcast programmes, but it doesn’t prescribe a LUFS level for personal listening.
How should I position two monitors on a small desk?
Point both monitors towards your listening position, aiming for equal height and distance and a symmetrical setup. Genelec describes an ideal stereo triangle with a 60° angle between the monitors; also take the effects of your desk and walls into account.
Do I need a calibration microphone or extra cables?
That depends on the version you choose and the outputs on your audio source. IK Multimedia lists the measurement microphone as included with the pair version of the iLoud Micro Monitor Pro, while the Dutch offer is for a single monitor. Also check that the monitor inputs are compatible with your interface or computer.
What rights apply to online purchases in the Netherlands?
For an ordinary online consumer purchase, you’ll generally have a statutory cooling-off period of up to 14 days after delivery; ACM ConsuWijzer explains the exceptions. You’re also entitled to a legal guarantee if a product, when used normally, doesn’t meet your reasonable expectations. This doesn’t automatically mean a fixed two-year guarantee period.