Who is this buying guide for?

Film mixer with a small desk

You mainly edit dialogue, music and effects at a fixed computer workstation. Your stereo pair needs to fit there and be positioned symmetrically.

Laptop editor with locally stored audio files

You play source material from a laptop and want to know whether you can listen directly via USB-C, or whether you need a suitable analogue output or interface.

Creator who needs to assess low-frequency effects

Your soundtrack includes low frequencies that you don’t want to judge solely on the basis of a speaker specification. Both the measurement definition and your listening space matter.

What should you look for?

First check that you can position and connect a stereo pair. Then look at the measurement basis for low frequencies and exactly what’s included with the set.

What to consider What should you check? Who is this important for?
Assessing the mix Choose a stereo pair that suits your listening distance and plan a symmetrical position. If I want to assess differences between dialogue, music and effects, I prioritise the listening setup. Around 29% of consumers put assessing the mix first.
Desk placement Measure the available width and depth, and plan a setup with both speakers angled towards your listening position. With limited space, I want to know whether two speakers will fit and can be positioned properly. Around 22% of consumers prioritise placement on a small or awkward workstation.
Connecting to your source Compare the outputs on your computer or interface with the USB-C, balanced TRS, RCA or minijack inputs on the exact model. If I play local files from my laptop, I want a connection that works with my equipment. Around 21% of consumers prioritise a straightforward connection to their source.
Low frequencies in music and effects Check whether the frequency range is specified at, for example, −3, −6 or −10 dB. If necessary, assess important low frequencies using an additional listening reference too. If low-frequency effects are an important part of a mix decision, I don’t want to rely on just one stated lower limit. Around 14% of consumers consider bass response decisive.
What’s included in the stereo set Check the exact listing to see whether it’s a pair and which cables or other components are included. I want to know in advance whether I can connect the complete set and what else I’ll need. Around 14% of consumers prioritise what’s included in a complete stereo set.

Common pitfalls

  • Comparing frequency ranges without checking the measurement threshold

    The Yamaha HS3 lists separate ranges at −3 dB and −10 dB, while ADAM Audio specifies a lower limit of −6 dB for the D3V. So simply comparing the lowest figures doesn’t mean you’re comparing like with like.

    Compare frequency specifications only when you know the measurement threshold, and assess important low frequencies in your own listening setup too.

  • Assuming a room setting will fix poor placement

    Reflections and room resonances affect what you hear at your listening position. An adjustment option won’t automatically remove these physical effects.

    Plan a symmetrical position first, and only use any available adjustments with your actual listening position in mind.

  • Mistaking a listing for one speaker for a stereo pair

    Some models are explicitly listed as a pair, while listings can vary in what they include.

    Check the exact listing to see how many speakers and which cables are included, and what else you’ll need for your setup.

  • Confusing a local audio file with material you’re allowed to publish

    According to the Dutch Government, a copy for personal use doesn’t give you permission to distribute or make copyrighted work available to the public.

    Before publishing your film, document the source and licence for your source material, as well as any permissions you need.

Brands to consider

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a compact pair for uses including video production and desktop setups.

  • The manufacturer lists balanced TRS, RCA and stereo minijack inputs, a headphone output, and controls for high and low frequencies.
  • The stated lower limit is 80 Hz. A manufacturer’s claim about accurate reproduction isn’t an independent measurement of your film-editing workspace.

Yamaha

According to Yamaha, the Yamaha HS3 is a compact active stereo pair with several analogue inputs and adjustable ROOM CONTROL and HIGH TRIM.

  • The European specifications list a pair, cables and a headphone output. For the HS3, Yamaha specifies 70 Hz–22 kHz at −10 dB and 85 Hz–20 kHz at −3 dB.
  • The two frequency ranges use different measurement thresholds. Also check the mains voltage shown on the rear panel of the unit you buy.

ADAM Audio

ADAM Audio positions the D3V as a compact desktop monitor with USB-C for computer playback and balanced analogue inputs. Sound On Sound also describes its desktop-focused design and the connection accessories supplied.

  • According to ADAM Audio, USB-C can be used directly for computer playback; the model also has balanced TRS inputs.
  • The stated lower limit of 45 Hz applies at −6 dB. That figure alone doesn’t prove better bass assessment in any given room.

Edifier

Edifier describes the MR4 as a set with a monitor mode and a separate music mode for everyday listening.

  • The manufacturer lists balanced 6.35 mm TRS, RCA and aux inputs, as well as a headphone output.
  • Use the intended listening mode for mixing. Edifier’s claims about a flatter response are manufacturer claims, not an independent test for this film-making application.

Hercules

Hercules positions the DJMonitor 42 as an active stereo set for DJing and mixing.

  • Hercules lists RCA, aux, a headphone output and controls for low and high frequencies; according to the manufacturer, the box contains two speakers.
  • Don’t treat claims about precision as independent measurements for mixing a film soundtrack.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position a stereo pair for mixing?

Angle both speakers towards your listening position and aim for a 60° angle between left and right, with a symmetrical setup. Genelec points out that walls and reflections affect reproduction, so take account of the space you actually have.

Do I need an audio interface to play locally stored audio files?

Not necessarily for playback: according to ADAM Audio, the D3V can play audio directly from a computer via USB-C. If you choose analogue monitors, check that your computer or existing interface has an output that matches the exact model. A USB-C playback connection doesn’t tell you anything about the equipment you might need for recording.

What should I check if a product develops a fault after purchase?

Keep your proof of purchase and report any fault to the seller. According to ACM ConsuWijzer, the Dutch statutory guarantee doesn’t have a fixed duration of two years: with normal use, it covers what you can reasonably expect from the product. A separate manufacturer’s guarantee doesn’t determine the length of your statutory rights.

Can I use locally stored music or other people’s film audio in my student film?

Having a file stored locally isn’t the same as having permission to use and distribute it. According to the Dutch Government, you may only use copyrighted music and films with the creator’s permission; a home copy for personal use may not be distributed or made available to the public. For each file, check which rights and permissions cover your intended use.