Who are these monitors for?

Student balancing dialogue and music

Wants to assess the differences between voices, music and effects using suitable reference tracks, without assuming that a louder reference sounds better. iZotope recommends comparing reference tracks with your own mix at the same volume.

Mixer working at a small desk

Has little room for a symmetrical stereo pair and wants to check in advance that their computer or audio interface can connect to the monitors.

Film-maker creating bass-heavy scenes

Wants to assess low-frequency effects and find out what the monitors can and can’t reproduce in combination with the room. Genelec points out that both room acoustics and placement affect the sound at the listening position.

What should you look for when choosing?

Start with the room and connections to find a suitable stereo pair. Then consider whether the low-frequency response gives you enough information for your film mix.

What to consider What to look for when buying Who is this important for?
Comparing dialogue and reference tracks Listen to suitable reference tracks at the same volume and use a properly positioned stereo pair. I want to compare dialogue, music and effects fairly with reference tracks, without a higher volume influencing my judgement. Around 36% of consumers give this balance the highest priority.
Positioning on a small desk Measure the available space and listening distance. Check whether both monitors can be positioned symmetrically towards your listening position. At a small desk, I want to be able to position both speakers properly and assess them from my listening position. Around 29% of consumers prioritise the layout of a small workspace.
Low-frequency response for film effects Compare frequency ranges only at the same measurement level, such as −6 dB, and decide whether you need additional monitoring. If important effects contain deep bass, I want to know whether my monitors give me enough information. Around 21% of consumers prioritise monitoring low-frequency effects.
Connections and stereo pairing Check that your computer or audio interface outputs are compatible with the inputs, and whether you’re buying one monitor or a pair. I want to use my audio source without connection problems and know straight away what I need for two channels. Around 14% of consumers give connectivity and a complete stereo pair the highest priority.

Common buying mistakes

  • Assuming a single studio monitor is a stereo set

    The Yamaha HS5 and PreSonus Eris Studio 5 are sold as individual monitors, while the ADAM D3V is described as a pair. So one monitor isn’t automatically a complete stereo set.

    Before buying, check what’s included in the box and what you need for two channels.

  • Comparing frequency ranges without checking the dB measurement level

    Yamaha lists the HS5 at 54 Hz at −10 dB and 74 Hz at −3 dB. A frequency limit without its measurement level can therefore make for a misleading comparison.

    Where possible, compare specifications measured on the same basis and check important bass decisions in other ways too.

  • Thinking room settings can replace good placement

    Monitor settings don’t eliminate every effect of the room or speaker position. Genelec stresses that both help determine what you hear at the listening position.

    First work out where symmetrical placement is possible, then decide which settings you need.

Brands to consider

ADAM Audio

The D3V is an active desktop system for anyone looking for a computer connection and a compact setup.

  • According to ADAM Audio, the stereo pair has USB-C, two balanced TRS inputs and detachable stands.
  • The stated frequency range down to 45 Hz is at −6 dB; this doesn’t confirm how low the system will sound at your listening position.

Yamaha

The HS5 is an active nearfield monitor sold individually, designed for a setup with compatible analogue outputs.

  • Yamaha lists XLR and TRS inputs, as well as ROOM CONTROL and HIGH TRIM controls.
  • The stated lower limit varies by measurement level: 54 Hz at −10 dB and 74 Hz at −3 dB. You’ll need two for stereo.

JBL Professional

The 305P MkII is an active 5-inch monitor for anyone comparing analogue inputs and settings for desktop or near-wall placement.

  • JBL lists balanced XLR and TRS inputs, Boundary EQ and HF Trim.
  • Claims about detail and a wide listening area come from the manufacturer; they aren’t an independent performance comparison.

PreSonus

The Eris Studio 5 is an active monitor sold individually, with a range of acoustic adjustment options.

  • PreSonus lists Acoustic Space, Mid, High and Low Cut, among other features.
  • Claims about tonal accuracy come from the manufacturer. If you want stereo, check whether you need a second monitor.

Genelec

The compact 8010A is an individual active monitor for a workspace where its size and an XLR connection are a good fit.

  • Genelec gives the dimensions as 195 × 121 × 115 mm and lists one analogue XLR input.
  • The stated lower limit is 67 Hz at −6 dB; the dimensions don’t remove limitations in low-frequency response or room placement.

Products at Joybuy

Related products coming soon.

Frequently asked questions

How do I compare my film soundtrack with reference tracks?

Compare suitable reference tracks with your own mix at the same listening volume. iZotope points out that differences in loudness can skew your judgement of things such as tonal balance.

How should I position two studio monitors?

Point both monitors towards your listening position, and consider the effect of your desk and room too. For stereo, Genelec recommends an equilateral triangle, with a 60° angle between the monitors.

Do I need a subwoofer for a student film?

Not for every mix. If important decisions depend on bass below the usable range of your monitors, a suitably matched subwoofer can provide additional information; the room also affects the result.

Am I automatically entitled to exactly two years’ statutory guarantee in the Netherlands?

No. The Dutch government states that the Netherlands has no fixed statutory guarantee period; you’re entitled to a product that meets what you can reasonably expect. A manufacturer’s or seller’s guarantee is separate from this.

What should I look for in the electrical safety of an active monitor?

The CE marking is relevant for electrical products covered by applicable EU product rules. Check the product and safety information when buying. The Dutch government explains the CE marking for products covered by these rules; the marking says nothing about sound quality.