When mixing a student film, a symmetrical stereo setup is important so you can assess dialogue, music and effects together. Choose monitors to suit your room and available connections. A lower stated frequency limit does not guarantee better mix decisions in your room, so check the bass on another playback system too if needed.
Who is this guide for?
Film mixer working with lots of dialogue
You’re balancing clear speech against music and effects, and want to assess stereo and level differences. The EBU explains that speech intelligibility depends in part on the recording, processing, mix and playback chain.
Mixer working at a small desk
You have limited space and want to position two monitors so that the stereo image remains useful. Genelec describes symmetrical placement as a starting point for stereo listening.
Mixer working with bass-heavy music and effects
You need to make decisions about bass while also accounting for the room’s influence. Genelec explains how surfaces, furniture and floors can reflect, scatter or absorb sound.
What should you look for when choosing?
Two separate active nearfield monitors
Best suited to: a fixed, symmetrical listening position and suitable outputs on your audio interface.
Trade-off: you’ll need space and connections for two monitors; their position and the room will affect what you hear.
Compact active stereo set
Best suited to: limited desk space or when you want a complete left-and-right set with simple connections.
Trade-off: Hercules describes the DJMonitor 42 as a DJ speaker set, so check the soundtrack on other playback systems too.
Larger nearfields for bass decisions
Best suited to: mixes where bass in the music or effects matters, provided your workspace and room can accommodate the setup.
Trade-off: a wider stated frequency range doesn’t tell you by itself how the bass will sound in your room; only compare frequency limits measured on the same basis.
| What to consider |
What to look for when buying |
Who is this important for? |
| Dialogue and stereo balance |
Listen to dialogue in complete scenes and check the mix on the playback system likely to be used for your portfolio review. |
If you want speech to stay clear alongside music and effects, dialogue balance matters most; around 33% of consumers prioritise this. |
| Space and placement |
Measure the space available and check whether two monitors can be placed symmetrically and angled towards your listening position. |
If you work at a small desk, you’ll want to fit two monitors without losing sight of your listening position; around 27% of consumers prioritise this need for space. |
| Bass in music and effects |
Compare the measurement limits given in frequency specifications and listen to the mix outside your main monitor setup too. |
If bass-heavy effects and music are central to your mix, you’ll want to know how the room affects their playback; around 20% of consumers prioritise bass monitoring. |
| Connections and complete set |
Check how many speakers are included, which inputs they have, what outputs your source offers and which cables come in the box. |
If you want to connect a complete stereo set straight away, compatible connections and box contents are crucial; around 20% of consumers prioritise this. |
Common pitfalls
-
Comparing the price of one speaker with the price of a stereo pair
A stereo mix needs a left and a right monitor. Some models are sold as a pair, while specifications for others apply to one monitor only.
Before buying, check explicitly whether the offer includes one speaker or a pair, and what’s in the box.
-
Using frequency limits measured in different ways as a bass ranking
The Yamaha HS5 has a stated lower limit of 54 Hz at −10 dB, while the ADAM T5V is listed at 45 Hz at −6 dB. These figures aren’t directly comparable because they use different measurement limits.
Check the measurement limit given with the specification and take your room’s acoustics and speaker placement into account.
-
Automatically treating a compact or DJ-focused set as a film-mixing reference
Hercules describes the DJMonitor 42 as a DJ speaker set. That positioning isn’t an independent assessment of its suitability for accurate film mixing.
Choose based on your proven space and connection requirements, then check the finished soundtrack on other playback systems.
Brands worth considering
Yamaha
The HS series includes active nearfields such as the HS5 and HS7. Compare their size and stated bass range with the space you have available.
- Yamaha lists balanced XLR and 6.35 mm inputs and Room Control for the HS5.
- The stated lower limit of 54 Hz applies at −10 dB; it doesn’t guarantee how audible the bass will be in your room.
JBL
The active 305P MkII is a 5-inch nearfield worth comparing if connections and placement settings matter to you.
- JBL lists balanced XLR and TRS inputs, an input-level switch and Boundary EQ.
- JBL’s claim about a wide listening area is a manufacturer claim, not an independent comparison with the other models mentioned.
Kali Audio
The LP-6 V2 and LP-8 V2 are active models to compare if space and bass monitoring are important factors.
- Kali Audio publishes specifications and measurement data for the LP series.
- Kali Audio’s claims about accuracy and playback on other systems come from the manufacturer; check the model version and measurement basis before comparing.
ADAM Audio
ADAM Audio positions the active T5V for small control rooms, including video production.
- ADAM Audio lists a 5-inch woofer, a rear-facing bass-reflex port and 45 Hz at −6 dB.
- This frequency limit isn’t directly comparable with a figure measured at −10 dB; ADAM Audio’s performance descriptions are manufacturer claims.
PreSonus
PreSonus describes the Eris 5BT 2nd Gen as an active stereo set for uses including video production and bedroom-studio setups.
- PreSonus specifies a pair with balanced TRS, unbalanced RCA and 3.5 mm inputs, plus Bluetooth.
- For critical mixing, check that the wired connection is compatible with your source; Bluetooth alone doesn’t prove a set is suitable as a mixing reference.
Joybuy products
Related products coming soon.
Frequently asked questions
How should you position two monitors for a stereo mix?
Angle both monitors towards your listening position and start with a symmetrical setup, with the monitors and your listening position forming an equilateral triangle, as Genelec recommends. Then assess how the room and nearby surfaces affect the sound.
Do you need a separate power amplifier for active monitors?
Not for the active models described here: they have built-in amplification. You will need a suitable audio signal and compatible connections, though. For stereo, you need two monitors if they’re sold separately.
Do you need to deliver your portfolio film at −23 LUFS?
Not without knowing the delivery requirements set by your course or screening platform. EBU R 128 recommends −23 LUFS for the use covered by its recommendation; that figure isn’t automatically a requirement for your portfolio review.
What rights do you have when buying online in the Netherlands?
For eligible online consumer purchases, you generally have a 14-day cooling-off period, according to information from the Dutch government. ACM ConsuWijzer also states that the seller is responsible for providing an appropriate solution if a product doesn’t perform as you could reasonably expect under normal use. Check who the seller is and which terms apply to your purchase.