Who are these monitors for?

Student with a narrow desk

You want room for a stereo pair and to listen from your computer without a complicated setup. The ADAM D3V offers USB-C and detachable stands, which may be useful in a compact workspace.

Arranger balancing strings

You want to judge left-to-right placement and the balance between parts while mixing. Genelec describes symmetrical left and right reproduction as important for an accurate stereo image.

Mixer working in a difficult room

You may have limited scope to adjust the room, so you might be looking for placement settings or calibration. ADAM Audio, Yamaha and IK Multimedia describe adjustment or measurement-based correction options; these are no substitute for careful setup.

What should you look for when choosing?

Start with the most symmetrical listening setup you can manage. Then choose based on desk space, available connections and whether you want to carry out a measurement procedure.

Compact desktop stereo set

When to choose it: if desk space is limited and you want to work directly from a compatible computer. The ADAM D3V has USB-C and analogue TRS inputs; the Edifier MR4 is an analogue desktop option.

Consider: check which cables and components are included with the set you choose. According to ADAM Audio, the D3V’s internal processing operates at 48 kHz/16-bit in USB mode; consider whether the analogue connection is a better fit for your signal path.

Two separate nearfields

When to choose them: if you can position two monitors symmetrically and have suitable analogue outputs. The Genelec 8010A has XLR; the Yamaha HS5 has XLR and TRS inputs.

Consider: the Genelec 8010A and Yamaha HS5 are packaged individually, so you’ll need two for stereo. Their stated low-frequency limits use different measurement levels and are not directly comparable.

Compact monitors with room calibration

When to choose them: if you want to measure at your listening position and follow the calibration procedure. IK Multimedia lists built-in ARC X calibration for the iLoud Micro Monitor Pro.

Consider: check that you’re choosing the Pair version; according to IK Multimedia, this includes the measurement microphone. Calibration won’t automatically eliminate reflections or an asymmetrical setup.

What to consider What should you check? Who is this for?
Space and placement Measure the space for both cabinets and angle them as symmetrically as possible towards your listening position. Genelec gives the 8010A’s dimensions as 195 × 121 × 115 mm, including the Iso-Pod. I want to fit two monitors on a narrow desk and position them symmetrically. Around 36% of consumers say space and placement are their main concern.
Balance and stereo image Check that both monitors are positioned similarly and see which placement settings are available. Yamaha lists ROOM CONTROL and HIGH TRIM; for calibration, check the exact version and whether a microphone is included. When balancing strings, I want to judge the parts and their stereo placement accurately. Around 29% of consumers prioritise this when assessing a mix.
Connections Compare your computer or interface outputs with the monitor inputs, and check which cables you’ll need. The D3V offers USB-C and balanced TRS inputs; the 8010A uses XLR. If I want to use my existing computer or interface, the connections need to be compatible. Around 21% of consumers give ease of connection top priority.
Complete stereo set Check whether the package contains one monitor or a pair, and which cables and measurement microphone are included. Genelec lists one 8010A per package; the measurement microphone comes with the Pair version of the iLoud Micro Monitor Pro. For stereo, I want to know in advance which components I need and how many monitors to buy. Around 14% of consumers focus mainly on what’s included in the complete set.

How to avoid common buying mistakes

  • Confusing a single monitor with a stereo pair

    The Genelec 8010A and Yamaha HS5 are supplied individually. You’ll need two monitors for stereo playback.

    Before buying, check how many units are included and which signal cables you’ll need for both channels.

  • Comparing frequency limits without checking the measurement level

    Genelec gives the 8010A a low-frequency limit of 67 Hz at −6 dB; Yamaha lists the HS5 at 54 Hz at −10 dB and 74 Hz at −3 dB, among other figures. These values use different measurement levels and are not directly comparable.

    Check how the figures were measured, and consider placement and the room before choosing based on a single frequency value.

  • Expecting room correction to fix poor placement

    Calibration can be part of the setup, but it won’t automatically eliminate reflections or an asymmetrical listening position.

    First, make the setup as symmetrical as possible. If you’re choosing the iLoud Micro Monitor Pro, check that you’re getting the Pair version with the measurement microphone.

Brands to compare

ADAM Audio

The D3V is a compact active desktop stereo set for a computer workspace.

  • ADAM Audio lists USB-C, balanced TRS inputs, detachable stands and placement switches.
  • According to ADAM Audio, internal processing operates at 48 kHz/16-bit in USB mode. Consider the analogue connection if you need a different signal path.

Genelec

The 8010A is a compact, standalone active nearfield with an analogue XLR connection.

  • Genelec specifies dimensions of 195 × 121 × 115 mm, including the Iso-Pod, and a frequency range of 67 Hz–25 kHz at −6 dB.
  • Genelec lists one monitor per package. The stated low-frequency limit alone doesn’t tell you how the bass will sound at your listening position.

Yamaha

The HS5 is a standalone active 5-inch nearfield with analogue XLR and TRS inputs.

  • Yamaha Europe lists ROOM CONTROL and HIGH TRIM, with frequency limits of 54 Hz at −10 dB and 74 Hz at −3 dB.
  • The HS5 is supplied individually. When comparing it with other models, bear in mind the measurement level used for the stated frequency limits.

IK Multimedia

The iLoud Micro Monitor Pro is a compact option with built-in ARC X calibration.

  • According to IK Multimedia, each monitor has XLR and RCA inputs; the measurement microphone is included with the Pair version.
  • Check the version and measurement procedure. Having calibration does not prove that room issues have been fully resolved.

Edifier

The MR4 is a desktop set with analogue connections and separate monitor and music modes.

  • Edifier lists balanced 6.35-mm TRS inputs and a 4-inch woofer.
  • Edifier’s description of the tuning is not an independent measurement of accuracy in a student room; also check which mode you use when mixing.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors for a string mix?

Angle both monitors towards your listening position and try to place them at the same height and at similar distances. For music production, Genelec describes the ideal listening position as the tip of an equilateral triangle; apply this as far as your room allows.

Do I need an audio interface as well as the monitors?

It depends on the connections available on your computer or interface and the monitors you choose. According to ADAM Audio, the D3V can connect directly to a compatible computer via USB-C; each Genelec 8010A uses analogue XLR, while the Yamaha HS5 has analogue XLR and TRS inputs. Also check which cables and volume controls you’ll need.

How can I clean my monitors safely?

Follow the manual for the model you’ve bought. For the MR4, Edifier instructs users to unplug it before cleaning and to use a dry cloth; don’t treat this model-specific guidance as a complete manual for other brands.

What are my rights if I buy online or receive a faulty product in the Netherlands?

When you buy online from a business, you’ll often have a 14-day cooling-off period, according to the Dutch government. There is no fixed general time limit for the statutory guarantee in the Netherlands; the seller is responsible for providing a suitable solution if a product fails to meet what you could reasonably expect under normal use.

Can I mix loudly at any time in a student room?

There is no single time that applies to every student room. The Dutch government says that noise nuisance from neighbours may be covered by local regulations in many municipalities, so check your local council’s rules and any terms in your tenancy agreement.