Who can benefit?

Musicians who adjust their desk height

You switch between sitting and standing and want to assess strings and reverb in stereo. So, consider the monitors’ height and angle in relation to your listening position.

Creators assessing string detail

You focus on the balance between parts, articulation and spatial placement. A symmetrical listening setup and attention to unwanted reflections are also important considerations.

Creators working on full arrangements

You combine strings with other instruments and want to assess the bass, too. Read a stated frequency limit alongside its measurement tolerance, and bear in mind the room you’ll be mixing in.

What should you look for?

Start with listening height and the space available for a symmetrical stereo position. Then compare bass response, settings and connections, and check whether you’re ordering a pair or individual monitors.

What to consider What to look for when buying Best suited to
Listening height and stereo image Check whether two monitors can be positioned symmetrically and angled towards your ears at the desk heights you use. If I switch between sitting and standing, I want to be able to point the monitors towards my listening position. Around 33% of consumers put changing listening height first.
String balance and detail Check what desk or room settings are available and plan for a symmetrical listening position. When assessing parts, articulation and spaciousness, I don’t want reflections to have an unnecessary effect on my listening setup. Around 27% of consumers prioritise string detail.
Room acoustics and bass Only compare frequency limits measured at the same dB tolerance, and take wall distance and room settings into account. If I want to assess the bass in my own room, I consider both the measurement tolerance and placement. Around 20% of consumers prioritise room acoustics and bass.
Connections and a complete stereo setup Check whether the box contains one monitor or a pair, and whether the inputs are compatible with your equipment. I want to know in advance whether I can connect a complete stereo setup and what I’ll need to do so. Around 20% of consumers start by checking the connections and the complete purchase.

Buying pitfalls

  • Comparing frequency limits without checking the measurement tolerance

    The models covered use different tolerances, including −3, −6 and −10 dB. A lower stated figure alone doesn’t show how useful the bass will be in your room.

    Note the corresponding dB tolerance for each frequency limit, and assess placement separately in your own room.

  • Mistaking one monitor for a stereo pair

    Yamaha sells the HS5 individually, as does Genelec with the 8030C. So, you may need a second monitor for a stereo mix.

    Before ordering, check how many monitors are included and which components come with the version you’ve chosen.

    You may also need suitable cables or stands for a complete setup. Check what will work with your equipment and placement.

  • Treating desk correction as a substitute for good placement

    Your desk and room can cause reflections. Genelec notes that calibration may not solve every acoustic problem.

    First, decide on your listening height, symmetry and placement. Then consider which settings are suitable for that position.

Brands to compare

Kali Audio

Kali describes the LP-UNF as a compact desktop set with placement settings, including options for use on a desk against a wall. The LP range also includes larger nearfield models.

  • According to Kali, the LP-UNF has USB-C and balanced TRS inputs, among other features.
  • The stated 39 Hz figure is measured at −10 dB. Don’t compare it directly with frequency limits measured at a different tolerance.

Yamaha

The HS series includes individual active nearfield monitors, including the HS5.

  • Yamaha lists XLR and TRS inputs, as well as ROOM CONTROL/HIGH TRIM, for the HS5.
  • Yamaha gives different frequency limits: 54 Hz at −10 dB and 74 Hz at −3 dB. The HS5 is sold individually.

ADAM Audio

The T5V is a compact active nearfield monitor for anyone looking to compare individual monitors.

  • ADAM Audio lists a 5-inch woofer and a rear bass reflex port.
  • The stated lower limit of 45 Hz is measured at −6 dB. Consider the distance from the wall and how the monitor performs in your own room.

Genelec

The 8030C is a compact active monitor with room compensation switches and a supplied Iso-Pod.

  • Genelec gives the 8030C a frequency range of 47 Hz–25 kHz at −6 dB.
  • Genelec states that one monitor is included per box. According to Genelec’s general information on acoustics, room compensation won’t solve every room problem.

IK Multimedia

The iLoud MTM MKII is a compact active monitor with a desk setting and built-in calibration. A pair version is also available.

  • The desk setting and calibration may be useful if you’re using the monitor on a reflective desk.
  • According to IK Multimedia, the calibration microphone and related components are only included with the pair version and the Immersive Bundle. Calibration doesn’t guarantee that room reflections will disappear.

Joybuy products

Related products coming soon.

Frequently asked questions

Do the monitors need to move when I raise my desk?

Not necessarily, but point both monitors towards ear height at the listening position where you make mixing decisions. If you switch between sitting and standing, check their angle, distance and symmetry at both heights. One fixed height won’t automatically suit both positions.

Can automatic calibration fully correct a reflective desk or a difficult room?

No. According to IK Multimedia, the iLoud MTM MKII has automatic calibration and a desk setting, but Genelec notes that calibration may not solve every acoustic problem. Start with placement, then assess which correction settings are right for your listening position.

How can you tell whether you’re ordering a complete stereo setup?

Check whether the version you’ve chosen includes one monitor or a pair, and compare the inputs with your audio equipment. Yamaha sells the HS5 individually, as does Genelec with the 8030C. According to IK Multimedia, whether a calibration microphone is included with the iLoud MTM MKII depends on the bundle you choose.

What are your rights when buying online in the Netherlands?

According to the Netherlands Authority for Consumers and Markets, consumers generally have a 14-day cooling-off period after delivery, subject to legal exceptions. The seller is also responsible for the statutory guarantee if a product doesn’t meet what you could reasonably expect under normal use. This is not the same as a fixed commercial warranty period.

What should you check for the product safety of an active monitor?

The Dutch Government states that electronic devices sold in the EU must carry a CE mark. For the version you’re planning to buy, check the marking, safety information and suitability of the mains connection.