Who is this choice relevant to?

Speech editor who wants to assess the detail

You edit spoken intros and want a consistent listening setup for assessing voices and editing decisions. Compare adjustment options and placement, but don’t treat manufacturers’ claims about sound as a listening test.

Editor with limited desk space

Your sit-stand desk has limited room for two speakers. Their dimensions, how they fit at both desk heights and the connections you need will determine your choice.

Editor with an existing audio interface

You want to connect monitors to the outputs you already have and find out in advance whether an offer includes one speaker or a stereo pair.

What should you look for when choosing?

First choose between a compact active set and separate monitors. Then check whether you can position and connect them suitably at both desk heights.

Compact active stereo set

A good fit if: desk space is limited and simple connections are a priority.

Bear in mind: the specified response of the PreSonus Eris 3.5 2nd Gen runs from 80 Hz to 20 kHz; that specification alone says nothing about how well it lets you assess speech.

Separate active nearfield monitors

A good fit if: you have room for separate speakers and want to compare model-specific tuning options.

Bear in mind: features such as KRK’s Focus mode are manufacturers’ descriptions, not independent tests of speech reproduction. Also check whether you’re buying one monitor or a pair.

Very compact separate monitors

A good fit if: every centimetre counts and you have a compatible XLR connection.

Bear in mind: Genelec lists one 8010A monitor and one analogue XLR input per package. For stereo, you’ll also need to check how many units are included and which connections you need.

Passive monitors with an amplifier

A good fit if: you already have a suitable amplifier or want to build a separate amplifier system.

Bear in mind: passive monitors need an external amplifier, so include one when choosing your connections and equipment.

For a stereo pair, Genelec recommends a symmetrical setup, with the monitors angled towards your listening position and at equal height relative to you. Check that these proportions still work when you’re sitting and standing.

What to consider What should you check? Who is this important for?
Assessing speech Check the adjustment options on the exact model and compare it from a consistent listening position. If I want to assess voices and transitions while editing intros, I look for a consistent listening setup and don’t treat a sound mode as proof of better sound. Around 36% of consumers prioritise assessing spoken material.
Positioning when changing desk height Measure the available space and work out where the monitors and your ears will be when sitting and standing. When my desk moves between sitting and standing height, I want a usable listening position at both heights and enough room for two speakers. Around 29% of consumers prioritise positioning when the desk changes height.
Connecting to your equipment Note the type and number of audio outputs, then compare them with the inputs on the exact model. I want to use my existing audio interface without having to guess which cable will fit. Compatible connections are the top priority for around 21% of consumers.
Complete stereo setup Check how many monitors are included in the offer and which cables or additional equipment you’ll need. When putting together a complete stereo workstation, I want to know whether I’m buying one monitor or a pair, and what else I’ll need. Around 14% of consumers start by considering the complete setup.

Which buying mistakes can you avoid?

  • Assuming one monitor is a stereo pair

    The PreSonus Eris 3.5 2nd Gen is described as a pair, while Yamaha lists the HS5 and Genelec lists the 8010A as one monitor per package. Check the exact version before ordering.

    Check how many units you need for stereo; if you’re buying a single monitor, you may need to buy a second one as well.

    You may also need suitable cables to connect both monitors to your equipment.

  • Assuming adjustment controls can fix any setup

    Adjustment options won’t automatically make an unsuitable listening position work. The room, reflections and positioning all affect what you hear.

    First, plan your setup for both sitting and standing. Then use model-specific tuning as a tool, not as a substitute for suitable positioning.

  • Assuming every monitor will work with the same output

    The models listed have different analogue inputs: the Eris set has several types of input, while each Genelec 8010A has one XLR input.

    Before ordering, compare the outputs on your computer or audio interface with the inputs on the exact monitor model.

    Depending on the outputs you already have, you may need different cables or additional connection equipment.

Which brands are worth comparing?

PreSonus

The Eris 3.5 2nd Gen is a compact active set sold as a pair, for anyone short on space who wants several analogue connection options.

  • PreSonus lists TRS, RCA and ⅛-inch inputs, a headphone output and front-mounted volume control.
  • The specified frequency response is 80 Hz–20 kHz. Only compare it with figures measured on a comparable basis, and check that the offer is for the same version.

KRK

The ROKIT 5 Generation Five is a separate active monitor to consider if you also want to explore mid-range settings for speech.

  • KRK lists Mix, Focus and Create modes, as well as 25 tuning combinations.
  • The description of Focus as being designed for mid-range analysis is a manufacturer claim, not an independent test for spoken intros. The manufacturer lists one monitor.

JBL

The 305P MkII is an active 5-inch monitor for anyone who wants to consider desk or near-wall positioning and balanced connections.

  • JBL lists Boundary EQ, HF Trim, and XLR and ¼-inch TRS inputs.
  • The description of Boundary EQ’s effect comes from the manufacturer. Check your actual setup and how many units are included in the offer.

Yamaha

The HS5 is a separate active nearfield monitor for anyone looking to compare controls and XLR or TRS connections.

  • Yamaha lists ROOM CONTROL and HIGH TRIM.
  • The manufacturer lists one unit per package and gives frequency ranges with different dB limits. Don’t treat them as directly comparable performance figures unless they use the same measurement basis.

Genelec

The 8010A is a very compact separate active monitor for a space-conscious workstation with a compatible analogue XLR connection.

  • Genelec lists dimensions of 195 × 121 × 115 mm including the Iso-Pod, and one XLR input.
  • The package contains one monitor. Describing its sound reproduction as neutral is a manufacturer claim, not an independent assessment.

ADAM Audio

The T5V is an active 5-inch nearfield monitor to consider if you have room for a separate speaker with a rear-facing bass reflex port.

  • ADAM Audio lists a rear-facing bass reflex port.
  • The wide listening area is a manufacturer claim. Positioning and the effect of the room still matter, including at an adjustable desk.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors if you alternate between sitting and standing?

Angle the monitors towards your listening position and check that they’re arranged symmetrically and at equal height when you’re both sitting and standing. Genelec recommends these principles for a stereo pair, but they aren’t a universal solution for every sit-stand desk.

Can you connect an active monitor directly to your existing equipment?

It depends on the audio outputs on your equipment and the monitor’s inputs. The PreSonus Eris set lists RCA and ⅛-inch stereo inputs, among others; the Genelec 8010A is listed with one analogue XLR input per monitor. Check the exact connections and cables you’ll need.

Do active monitors need a separate amplifier?

Active monitors have a built-in amplifier; passive monitors need a suitable external amplifier. An audio interface doesn’t automatically perform the same function as an amplifier.

What should you check after buying, and what are your rights when ordering online?

Check whether the delivery contains one monitor or a pair and that you’ve received the correct version. According to the Dutch government, online distance purchases from a business generally come with a 14-day cooling-off period, subject to exceptions. If a product is faulty, you also have rights to a repair or replacement.

Which product safety rules apply to electric studio monitors in the Netherlands?

Electrical equipment sold in the Netherlands is subject to the relevant European product safety rules. Business.gov.nl lists electrical safety and electromagnetic compatibility, among other requirements. Where CE requirements apply, the manufacturer must establish conformity and draw up an EU declaration of conformity. The CE marking is not a quality mark for sound reproduction.