Who are these monitors for?

Spoken-word mixer

You mix speech, ambient sound and reference clips, and want to assess speech and stereo positioning from a fixed listening position.

Creator with a small desk

You have limited space for two speakers and are weighing up a compact pair against small, separate monitors.

Creator in a challenging listening room

You can’t easily position the speakers freely and symmetrically, so you want to consider the setup and any room controls.

What should you look for when choosing?

What to consider What should you check? Who should pay particular attention?
Speech and reference detail Plan a fixed, symmetrical stereo setup. Compare frequency responses alongside the stated dB condition; Genelec recommends positioning the stereo pair symmetrically in relation to the listening position. If I want to assess speech and reference clips from one fixed position, I prioritise how they work together. Around 33% of consumers put speech and reference detail first.
Room and positioning Check whether both monitors can be positioned symmetrically and directed towards your listening position; then look at the controls available on the specific model. Yamaha describes ROOM CONTROL on the HS5, while KRK lists listening modes and room EQ for the ROKIT 5 Generation Five. If my room limits where I can place the monitors, I want to know what I can realistically set up and adjust at my listening position. An estimated 27% of consumers put room and positioning first.
Desk space Measure the available width and depth on both sides. Genelec lists the 8010A as 121 mm wide and sold one monitor per pack; PreSonus offers the Eris 3.5 2nd Gen as a pair. If I need to fit two speakers on a small desk, space is my main constraint. Around 20% of consumers give limited desk space top priority.
Connections and complete pairs Compare the outputs on your audio source with the inputs on the exact model, and check how many monitors are included in the offer. Yamaha lists XLR and TRS inputs for the HS5; Genelec lists one analogue XLR input per 8010A. If I want to connect a complete pair to my existing audio source, I also check whether I’ll need suitable cables. An estimated 20% of consumers prioritise connections and what’s included.

Buying pitfalls

  • Mistaking a single monitor for a stereo pair

    Genelec lists one 8010A per pack, and Yamaha lists one HS5. You may therefore need a second unit for stereo.

    Before ordering, check how many monitors are included and which connections the specific offer has.

    Allow for a second monitor and suitable connection cables if they aren’t included in the offer.

  • Comparing low-frequency limits without checking the measurement conditions

    The Yamaha HS5’s stated limit of 54 Hz is at −10 dB; the ADAM Audio T5V is specified from 45 Hz at −6 dB. Without matching measurement conditions, these figures can’t be used to rank the monitors directly.

    Check the dB condition for each frequency response, and don’t draw conclusions about performance in your room from these two figures alone.

  • Treating room controls as a substitute for positioning

    The position of the speakers in relation to the walls, and the symmetry of the pair, affect what you hear at the listening position. Adjustment options don’t guarantee a suitable correction for every room.

    First work out a practical positioning plan, then check which room controls your chosen model offers.

Brands to consider

Yamaha

The HS5 is an active nearfield monitor sold individually, for a setup with two separate cabinets.

  • Yamaha lists balanced XLR and TRS connections, as well as ROOM CONTROL/HIGH TRIM, for the HS5.
  • The stated limit is 54 Hz at −10 dB. You’ll need two individually packed units for stereo. Yamaha’s claims about accuracy are manufacturer claims, not independent measurements for this session.

Genelec

The 8010A is a compact, individually sold monitor for a narrow workspace.

  • Genelec lists a width of 121 mm, an analogue XLR input and room compensation switches.
  • The stated low-frequency limit is 67 Hz at −6 dB, and the pack contains one monitor. Claims about neutral reproduction have not been independently verified here.

PreSonus

The Eris 3.5 2nd Gen is a compact system sold as a pair, with several inputs and a headphone output on the front.

  • PreSonus lists balanced TRS, unbalanced RCA and 3.5 mm inputs, and a frequency response from 80 Hz.
  • The clarity and accuracy described by the manufacturer are not the result of an independent test.

ADAM Audio

The T5V is a separate nearfield monitor; allow for the cabinet and the space behind it.

  • ADAM Audio lists a 5-inch woofer, a rear-facing bass reflex port and 45 Hz at −6 dB.
  • A limit at −6 dB can’t be directly ranked against one specified at −10 dB. The stated sound benefits are manufacturer claims.

KRK

The ROKIT 5 Generation Five is an active monitor sold individually, with adjustable listening modes and room EQ.

  • KRK lists three listening modes and 25 combinations of boundary and EQ settings.
  • The manufacturer says the settings can help with acoustic issues, but that doesn’t show which setting will suit a particular room or what result it will produce.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should you position two monitors to compare reference clips?

Start with a symmetrical setup and angle both monitors towards your listening position. Genelec recommends an equilateral triangle, with the listener at the point; following this positioning advice doesn’t guarantee that an untreated room will sound neutral.

Are two monitors included, and how do you connect them?

It varies by model. Genelec lists one 8010A per pack, and Yamaha lists one HS5; PreSonus offers the Eris 3.5 2nd Gen as a pair. Compare the inputs on your chosen model with the outputs on your audio source, and check which cables are included.

What can you do after buying online if a monitor doesn’t meet your needs?

For eligible online consumer purchases, you generally have a 14-day cooling-off period after delivery, although exceptions apply. ACM ConsuWijzer explains this cooling-off period; your statutory rights for a faulty product are separate. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands; contact the seller if a product is faulty.

What product safety rules apply to active studio monitors?

Electrical and electronic equipment placed on the market in the Netherlands must comply with the applicable European rules. Ondernemersplein, the Dutch government’s business portal, explains the general requirements; this information doesn’t confirm that a specific version on offer complies with them.