Who are these monitors for?

Sound designer with a small desk

Wants to listen reliably to the left and right channels, but has little room for two monitors. Size and symmetrical positioning are therefore important. Genelec provides advice on positioning stereo monitors and publishes the compact dimensions of the 8010A.

Student refining sound effects

Wants to assess sound details and stereo positioning from a fixed listening spot, and needs to check that the monitor connections suit their audio output. Genelec describes stereo positioning, while Yamaha and JBL list the connections for their models.

Sound designer working with plenty of bass

Wants to assess rumbles and low-frequency effects too, and needs to consider both the stated frequency limit and their listening position. Sound On Sound discusses small studio monitors; Genelec, ADAM Audio and Yamaha publish model specifications for bass reproduction.

What should you consider when choosing?

Very compact active monitors

Best suited when: two larger cabinets won’t fit symmetrically on your desk and you mainly want to assess positioning and audible details.

Trade-off: check deep bass with a suitable second listening reference too; the compact Genelec 8010A has one analogue XLR input per speaker.

Active pair of 5-inch monitors

Best suited when: you can position two speakers properly and want to assess more of an effect’s bass through the monitors themselves.

Trade-off: these models need more space. Check their positioning near walls, and only compare frequency limits when they use the same measurement tolerance.

What to consider What should you check? Who is this important for?
Positioning in a small room Measure the available width and depth for two speakers. Check whether you can place them at the same height and angle them symmetrically towards your listening position. If I have little desk space, I want to fit two speakers without making my workspace unusable. Around 25% of consumers prioritise positioning in a small room.
Details and stereo positioning Check whether you can position a matched left-and-right pair, and whether the inputs suit your audio output. I want to hear where an effect sits on the left or right and assess details from a fixed position. Around 25% of consumers prioritise sound-effect details and stereo positioning.
Listening with housemates Decide when you can use the speakers and whether you need a second listening reference at other times. If I share a room, I want to coordinate my listening times with my housemates. Around 20% of consumers prioritise being considerate of housemates.
Low frequencies Read the frequency limit alongside the dB tolerance, and listen from your own workspace. Don’t treat different tolerances as directly comparable. I want to assess low-frequency effects and understand what the stated limit does and doesn’t tell me about my listening position. Around 15% of consumers prioritise checking deep bass.
A complete stereo setup Check the number of speakers, the inputs and which cables or audio interface you’ll need. Don’t compare a deal for one speaker with one for a pair. I want to know in advance whether I need two compatible speakers and the right connection. Around 15% of consumers prioritise the cost and connections for a complete setup.

Common buying mistakes

  • Mistaking the price of one monitor for the price of a stereo pair

    You need two monitors for stereo monitoring. Bax Music Nederland lists the Yamaha HS5 and ADAM Audio T5V as models sold individually.

    Check how many speakers are included in the deal, compare the cost of buying two, and check which connections and cables you’ll need.

  • Comparing frequency limits with different tolerances directly

    ADAM Audio lists the T5V at 45 Hz at −6 dB; Yamaha lists the HS5 at 74 Hz at −3 dB. These limits use different measurement tolerances, and your room affects what you hear from your listening position.

    Note the full frequency specification, including the dB tolerance, and assess the bass from your own listening position.

  • Expecting EQ to fully correct poor positioning

    Reflections and the room affect what you hear. Genelec warns that calibration may not be enough to resolve every acoustic issue.

    Start with positioning that’s as symmetrical as possible, and use any settings to fine-tune the sound.

Relevant brands for this choice

Genelec

The 8010A is a compact active monitor for a workspace where room is limited.

  • Genelec lists dimensions of 195 × 121 × 115 mm with Iso-Pod, and one analogue XLR input per speaker.
  • The stated lower limit is 67 Hz at −6 dB, so don’t use this model as your only reference for deep bass.

ADAM Audio

The T5V is an active 5-inch nearfield monitor for a desk with room for larger cabinets.

  • ADAM Audio lists a frequency limit of 45 Hz at −6 dB.
  • The bass-reflex port is at the rear. Consider positioning near a wall, and don’t compare the frequency limit without taking the dB tolerance into account.

Yamaha

The HS5 is an active 5-inch monitor with XLR and TRS inputs, plus adjustable ROOM CONTROL and HIGH TRIM.

  • Yamaha specifies 74 Hz at −3 dB and dimensions of 170 × 285 × 222 mm.
  • Bax Music Nederland lists it as sold individually, so allow for two units for stereo. The specifications alone can’t predict how the monitor will sound in your room.

JBL

The 305P MkII is an active 5-inch option with XLR and TRS inputs and Boundary EQ.

  • JBL specifies a frequency response of 49 Hz–20 kHz at ±3 dB.
  • Positioning and the room still matter; JBL’s claims about accuracy and the sweet spot are manufacturer claims.

KRK

The ROKIT 5 Generation Five is an active 5-inch option with adjustable sound modes and EQ combinations.

  • KRK lists three voicing modes and 25 combinations of boundary and tuning EQ.
  • Settings don’t prove that the room acoustics have been fixed; Genelec notes that calibration won’t resolve every acoustic issue.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should I position two monitors to assess stereo effects?

Place the monitors at the same height and equal distances from your listening position, and angle them towards it. For a stereo pair, Genelec recommends a 60-degree angle at the listening position; adapt the setup to what’s possible in your room.

Do I need an amplifier with active monitors?

The active models discussed here have built-in amplification, but you still need to check the connections. Make sure your computer or audio interface output suits the monitor inputs, and work out which cables you’ll need.

How do I compare the stated bass limits of two monitors?

Only compare frequency limits that use the same dB tolerance and measurement conditions. For example, ADAM Audio lists the T5V at 45 Hz at −6 dB, while Yamaha lists the HS5 at 74 Hz at −3 dB; these figures aren’t directly equivalent. Your room also affects the bass you hear from your listening position.

Can room correction fix the acoustics in a student room?

No. According to Genelec, room correction won’t necessarily resolve every acoustic issue. Check positioning and reflections first; a setting doesn’t prove that the sound is neutral at your listening position.

How can I tell whether I’m buying a stereo pair?

Check how many speakers are included in the deal before you order. Bax Music Nederland lists the Yamaha HS5 and ADAM Audio T5V as sold individually, so you’ll need two of each for stereo.