Who are these studio monitors for?

Editors with limited desk space

You want to place two speakers either side of a screen and assess vocals and instruments from a fixed listening position. Cabinet size and symmetrical placement both matter; Genelec offers positioning advice for stereo monitors.

Editors with an existing audio interface

You play rehearsal recordings through an interface and want the monitors’ connections to match the outputs and cables you have. Models from ADAM Audio, Yamaha and Genelec offer different connection options.

Editors who also assess bass

You make decisions about elements such as bass guitar or kick drum, and don’t want to confuse stated low-frequency limits with directly comparable measurements or with what you hear from your listening position. Yamaha, Genelec and IK Multimedia quote figures using different measurement tolerances.

What should you look for in compact studio monitors?

When editing rehearsal recordings on a small desk, the main things to consider are positioning, connections, assessing low frequencies and making sure you have a complete stereo pair. The percentages show which of these concerns consumers may prioritise in this situation.

Consideration What to look for Which consumers?
Positioning on a small desk Measure the available width and depth for both cabinets, and plan to position them evenly in relation to your listening spot. If I want to put two speakers either side of my screen, they both need to point towards my listening position properly. Around 36% of consumers prioritise finding speakers that fit their space.
Connecting to your equipment Note the outputs on your computer or interface and check that you can connect both stereo channels. ADAM Audio lists USB-C and balanced TRS for the D3V; Genelec specifies one XLR input per 8010A monitor. When I play rehearsal recordings through my own computer or interface, I don’t want to choose a connection that isn’t compatible with my equipment. Around 29% of consumers start by checking compatibility.
Assessing low frequencies Only compare low-frequency limits when the measurement tolerances are the same. Yamaha quotes 85 Hz at −3 dB for the HS3; figures for other models may be based on a different tolerance. If I need to assess bass guitar or kick drum, I want to know exactly what the stated low-frequency limit means before using it as a point of comparison. Around 21% of consumers prioritise checking the bass response.
A complete stereo pair Check whether the package contains one monitor or a pair, and which connecting cables are included. Genelec lists one 8010A per package; Yamaha describes the HS3 as a pair. I want to listen to my left and right channels without finding out after purchase that I need a second monitor. Around 14% of consumers prioritise a complete stereo set.

Pitfalls when buying small studio monitors

  • Assuming one monitor is a stereo set

    A package containing one monitor isn’t enough for left and right channels. Genelec lists one 8010A per package, while Yamaha specifies the HS3 as a pair.

    Before ordering, check how many speakers are included in the listing and which cables come with them.

  • Comparing low-frequency limits without checking the measurement tolerance

    Manufacturers may state low-frequency limits at different levels, such as −3, −6 or −10 dB. A figure on its own therefore doesn’t show which set will deliver more useful bass on your desk.

    Only compare figures that use the same measurement tolerance, and don’t make important decisions about bass based on a single specification.

  • Assuming an input or room control is a complete solution

    Connections vary by model, and reflections from your desk and room can affect what you hear. For example, a USB-C playback connection doesn’t automatically replace a recording setup.

    Map out the route from your recording file to both speakers, then check which connections and positioning you’ll need.

Brands to consider

ADAM Audio

The D3V is an active desktop stereo set with USB-C and balanced analogue TRS connections.

  • The manufacturer lists positioning switches and detachable stands supplied with the D3V.
  • USB-C is a playback connection, so check that it’s compatible with your computer and recording setup.

Yamaha

The HS3 is a compact analogue stereo pair with several input types for existing equipment.

  • Yamaha specifies the individual cabinet dimensions of the HS3, as well as room and high-frequency controls.
  • The stated low-frequency limit of 85 Hz applies at −3 dB; don’t compare it directly with figures measured using a different tolerance.

Genelec

The 8010A is an active monitor sold individually, for use with compatible XLR outputs.

  • Genelec specifies a width and depth of 121 × 115 mm with the Iso-Pod, as well as room compensation controls.
  • Each package contains one monitor, so you’ll need two for stereo.

IK Multimedia

The iLoud Micro Monitor is a compact analogue set with connections including RCA and stereo mini-jack.

  • The manufacturer lists two speakers per package and several acoustic settings, including a desktop mode.
  • The stated 45 Hz applies at −10 dB; the specifications for this model don’t list a balanced input.

Edifier

The MR4 is an analogue desktop alternative with controls on the front panel.

  • Edifier Netherlands lists balanced 6.35 mm TRS inputs, a headphone output, and separate monitor and music modes.
  • The manufacturer’s claims about sound aren’t an independent comparison with other models.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors on a small desk?

Angle both monitors towards your listening position and try to place them symmetrically and at the same height. Genelec recommends an equilateral listening triangle for stereo production; desks, walls and furniture can affect the sound.

Do I need to treat the room for my studio monitors?

First, check the position and distance from the wall. Genelec notes that reflections can affect the bass and that a monitor with a rear bass reflex port may need space behind it. Follow the manual for your chosen model to find out how much clearance it needs; a room setting won’t necessarily solve every acoustic problem.

What can I do if monitors I bought online are faulty or unsuitable?

If a product doesn’t meet the standards you’re entitled to expect under normal use, the retailer is responsible for providing an appropriate solution under Dutch statutory guarantee rules. The Netherlands Authority for Consumers and Markets states that there’s no fixed time limit for the statutory guarantee. When you buy from a business at a distance, you’ll often have a 14-day cooling-off period, as explained by the Dutch government. Check which terms apply to your purchase.

Which product regulations are relevant to studio monitors in the Netherlands?

The requirements that apply depend on the type of device. The Netherlands Enterprise Agency explains that electrical and electronic equipment may be covered by EU product regulations, and that several directives or regulations may sometimes apply. Check the relevant conformity information for a specific model; general information doesn’t prove that a particular listing meets the requirements.

Can USB-C on a monitor set also record my rehearsal?

No. Don’t assume that a USB-C connection means there’s a recording input. ADAM Audio describes USB-C on the D3V as a connection for playing audio from a computer or mobile device through the monitors. You’ll also need a suitable recording setup to record.