Who are these monitors for?

Editor with limited desk space

Wants to fit two speakers beside a screen and assess spoken intros from their usual listening position. Dimensions and a symmetrical setup are important considerations.

Editor with an audio interface

Already has analogue left and right outputs and wants monitors with inputs, cables and volume controls suited to that setup.

Creator who also records voiceovers

Wants to edit through speakers after recording, but use headphones while recording to prevent speaker sound from being picked up by an open microphone. Focusrite warns about this type of audio bleed.

What should you look for when choosing?

Compact active pair with USB-C

Suitable for: playing audio directly from a compatible computer, if you have room for two monitors.

Bear in mind: ADAM Audio specifies internal processing via USB at 48 kHz/16-bit for the D3V. If you need 48 kHz/24-bit playback, consider the analogue connection instead.

Very compact analogue pair

Suitable for: a cramped desk and a compatible analogue output; IK Multimedia specifies the iLoud Micro Monitor as a pair with RCA and 3.5 mm stereo inputs.

Bear in mind: no USB audio input is specified, and Bluetooth latency also depends on the source device.

Analogue pair with multiple inputs

Suitable for: connecting, for example, an audio interface and another analogue source; Yamaha specifies the HS3 as a pair with several types of analogue input.

Bear in mind: Yamaha states that each cabinet is 132 mm wide. Measure the depth you need too, and allow room for cables.

Two individual XLR monitors

Suitable for: an audio interface with suitable left and right outputs; each Genelec 8010A monitor has an analogue XLR input.

Bear in mind: Genelec states that each pack contains one monitor, so you’ll need two and suitable cables for stereo.

Analogue pair with headphone output

Suitable for: anyone looking for TRS, RCA or 3.5 mm inputs and a headphone socket on the front; these are features of the PreSonus Eris 3.5 2nd Gen.

Bear in mind: before buying, check that the version on offer and its documentation are suitable for the Netherlands.

Key consideration What should you check? Who is this important for?
Space and positioning Measure the available width and depth on both sides, including space for cables. Check whether both monitors can be placed at a similar height and distance from your listening position. I want to fit two speakers beside my screen and position them evenly. Around 33% of consumers put space and positioning first.
Connections Compare the outputs on your computer or interface with the inputs on the exact model. Also check how to connect the left and right channels and adjust the volume. I already have an interface and want to know whether its outputs will connect directly to both monitors. Around 27% of consumers give connections top priority.
Listening back Check which positioning or sound controls the model offers. Compare the monitors from the same listening position, and read the frequency limits alongside their measurement tolerances. I want to assess spoken intros from my usual listening position and minimise differences caused by placement. Around 20% of consumers put their listening setup first.
Complete set and recording use Check whether the pack contains one monitor or a pair, and whether the connecting cable is included. Use headphones when recording with an open microphone. I want to edit in stereo and use the monitors alongside my voiceover work without speaker sound getting into the recording. Around 20% of consumers prioritise a complete set and recording-related use.

Buying pitfalls

  • Mistaking one speaker for a stereo pair

    Genelec supplies the 8010A individually, while Yamaha and IK Multimedia specify that the models discussed here are sold as a pair.

    Check the product page to see how many monitors and which cables are included, and whether you need a second unit for stereo.

    Buying a single monitor may mean you still need a second speaker and additional cables.

  • Assuming any active monitor will connect to your computer

    The models discussed have different connections, including USB-C, TRS, XLR, RCA and 3.5 mm. A compatible plug alone doesn’t confirm that the entire playback setup will work.

    Compare the outputs on your computer or interface with the inputs on the exact model, and check how to connect both stereo channels.

    You may need a suitable cable or an external audio connection.

  • Comparing frequency limits without considering measurement tolerance

    Yamaha specifies 85 Hz at −3 dB for the HS3; Genelec lists 67 Hz at −6 dB for the 8010A. As the reference points differ, the lower figure alone doesn’t prove which monitor is better suited to speech.

    When comparing models, look at both the frequency limit and its corresponding dB tolerance, and take positioning into account.

  • Leaving monitors on while recording a voiceover

    Focusrite warns that speaker sound can be picked up by an open microphone and end up in the recording.

    Use headphones while recording, then switch to monitors to listen back during editing.

Relevant brands to consider

ADAM Audio

The D3V is an active desktop stereo set for a compatible USB-C connection or two analogue TRS channels.

  • ADAM lists detachable stands and positioning controls.
  • ADAM states that internal processing works at 48 kHz/16-bit via USB and 24-bit via analogue. This specification isn’t an independent assessment of speech reproduction.

IK Multimedia

The iLoud Micro Monitor is a compact analogue desktop stereo pair with a specified desktop setting.

  • IK Multimedia specifies RCA and 3.5 mm stereo inputs, and a pair supplied with a connecting cable.
  • No USB audio input is specified; Bluetooth latency also depends on the source device.

Yamaha

Yamaha describes the HS3 as an active stereo set with several types of analogue input.

  • Yamaha lists room control and high trim, and supplies a pair in each pack.
  • Each cabinet is 132 mm wide; Yamaha specifies a depth of 189 mm for the left speaker and 177 mm for the right. Measure your desk to make sure they’ll fit.

Genelec

The 8010A is a small active monitor with an analogue XLR input, designed for connection to compatible individual outputs.

  • Genelec specifies dimensions of 195 × 121 × 115 mm, including the Iso-Pod.
  • Genelec states that each pack contains one monitor. You’ll need two for stereo.

PreSonus

The Eris 3.5 2nd Gen is an analogue desktop stereo pair with several types of input.

  • The manufacturer lists TRS, RCA and 3.5 mm inputs, high- and low-frequency controls, and a headphone output on the front.
  • Before buying, check that the version on offer and its electrical documentation are suitable for the Netherlands.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need a subwoofer to edit a spoken intro?

No, a subwoofer isn’t automatically necessary for this use. Start with a stereo set that suits your desk and connections. Compare low-frequency limits only alongside their measurement tolerances, then decide whether your work would benefit from more low-frequency control.

How should I position two monitors on a small desk?

Aim both monitors at the same listening position and try to place them at the same height, symmetrically to the left and right. Genelec describes an equilateral triangle as the ideal stereo arrangement; measure what’s practical on your desk.

Can I leave the monitors on while recording an intro?

If you’re using an open microphone, it’s better to wear headphones: Focusrite warns that speaker sound can be picked up by the microphone. You can use monitors to listen back to your edit after recording.

What happens in the Netherlands if a new speaker turns out to be faulty?

A product must meet the legal expectations; there is no fixed statutory guarantee period in the Netherlands. According to the Dutch government, the seller must offer a solution if something goes wrong. A manufacturer’s guarantee is in addition to this.

Is CE a quality mark for good sound?

No. Dutch government information describes CE as the manufacturer’s declaration that the product complies with the applicable EU rules, not as a quality mark. Versions with Bluetooth may also be subject to radio equipment rules.