Take comparison at a small desk
You want to assess differences between takes from a fixed listening position and need to be able to position both speakers symmetrically. Genelec recommends angling the monitors towards the listening position.
Start by checking that you have space to position two speakers symmetrically, then make sure their inputs are compatible with your computer or audio interface. A compact stereo set can be practical on a small desk; two separate nearfield monitors take up more room and may require a second speaker or suitable cabling. Only compare low-frequency limits if the measurement tolerance is also stated: your desk and room affect what you hear.
You want to assess differences between takes from a fixed listening position and need to be able to position both speakers symmetrically. Genelec recommends angling the monitors towards the listening position.
You have little room for speakers and are comparing compact stereo pairs with small monitors sold individually.
You switch between, for example, a computer and an audio interface, and want the connections and cables required to suit the sources you use.
| Buying consideration | What should you check? | Who is this important to? |
|---|---|---|
| Comparing takes reliably | Can the left and right speakers be positioned symmetrically, at the same height and facing the same listening position? | I want to assess differences between takes from one fixed listening position and avoid an uneven setup. Around 36% of consumers prioritise comparing takes. |
| Space and positioning | Measure the available width and depth for both speakers, and allow for your listening distance. | If my desk has little space, I still need enough room for a practical stereo setup. Around 29% of consumers say lack of space is their top priority. |
| Connection to the audio source | Compare the outputs on your source with the inputs on both monitors, and check which cables you need. | I want to use my computer or audio interface without an incompatible connection. Around 21% of consumers start by checking compatibility with their existing source. |
| Complete stereo set and bass response | Check whether the box contains one monitor or a pair; compare low-frequency limits along with their dB tolerance. | I want to know what I need for stereo and how to interpret a stated low-frequency limit. Around 14% of consumers prioritise a complete set and checking bass response. |
The Genelec 8010A is sold individually, while Yamaha packages the HS3 as a pair. A box containing one speaker is not automatically a complete stereo set.
Check what’s included in the box and make sure you have the right connections for both channels before choosing a model.
Yamaha specifies 85 Hz at −3 dB for the HS3, while Genelec specifies 67 Hz at −6 dB for the 8010A. These figures are not directly comparable, and your room also affects the sound.
Note the dB tolerance alongside each frequency figure, and don’t base a bass-critical choice on a single number.
Your desk, walls and reflections can affect the sound and stereo image, even when monitors have positioning settings.
Plan a symmetrical listening setup first, then use the settings that suit the monitors’ actual position.
The HS3 is a compact stereo set that Yamaha says is packaged as a pair.
Kali describes the LP-UNF as a monitor for desktop mixing; the IN-UNF consists of two satellites and a separate bass unit.
The 8010A is a small active monitor sold individually.
The Eris 3.5 2nd Gen is a compact pair for a range of line-level sources.
The 305P MkII is an active 5-inch nearfield monitor designed for a setup with two separate speakers.
ADAM describes the T5V as a 5-inch nearfield monitor for small control rooms.
Angle both monitors towards the same listening position and try to place them symmetrically, at the same height and at a similar distance from nearby walls. For stereo, Genelec recommends an equilateral triangle as the ideal setup; adapt the positioning to the space you actually have.
No, active studio monitors have a built-in amplifier. However, check the mains power, signal connection and cables required for each model: active doesn’t automatically mean a monitor can be connected directly to every computer.
Check whether the box contains one monitor or a pair, and make sure you have the right connections and cables for both channels. Genelec states that each box contains one 8010A; Yamaha packages the HS3 as a pair.
Electrical and electronic equipment sold in the Netherlands is subject to the relevant European product rules. Business.gov.nl states that, when the applicable technical and administrative requirements are met, a manufacturer must affix a CE marking and draw up an EU Declaration of Conformity. A CE marking is not an independent quality mark; check the documentation for the specific variant.
When you buy from a professional seller at a distance, you generally have a 14-day withdrawal period from the day the goods are delivered. Exceptions and conditions apply; before ordering, also check who is responsible for return costs under the seller’s terms and conditions.