Mixer with a crowded desk
You want to position two speakers around your animation screen without throwing off the stereo image. Measure the available space and decide where you’ll sit before choosing a size.
Start by choosing a setup that lets you position both monitors around your usual listening spot: placement and room acoustics affect what you hear in your mix. A compact active stereo pair can be practical when space is limited and you want a direct computer connection. Two separate monitors give you more flexibility if you have enough room, suitable outputs and the right connections. Check low musical and sound-effect elements on a second, familiar listening system too, as a stated frequency limit does not predict how the bass will sound where you listen.
You want to position two speakers around your animation screen without throwing off the stereo image. Measure the available space and decide where you’ll sit before choosing a size.
You want to listen to your score directly from your computer. Check that the monitors have connections compatible with your computer’s outputs.
You want to assess low musical and sound-effect elements, but a stated frequency response alone won’t tell you how the bass will sound in a small room.
Start with the setup and connections, then choose between a complete stereo pair and two separate monitors.
Choose this if: two small cabinets fit symmetrically beside your screen and you want to play audio via USB-C.
Consider: check computer compatibility and bear in mind that your desk and room can cause reflections.
Choose this if: your computer or interface has suitable analogue outputs and you want a complete pair.
Consider: check the output type, the cables you need and what’s included in the box.
Choose this if: you have suitable separate outputs and can position both speakers freely.
Consider: you’ll need two monitors for stereo, with a suitable connection and power supply for each.
| Concern | What should you look for? | Who should consider this? |
|---|---|---|
| Placement and desk space | Measure the space to the left and right of your screen and compare the cabinet dimensions. Aim both monitors at the same listening spot. | I want to position both speakers symmetrically beside my screen so I can assess the stereo image accurately; around 36% of consumers give suitable placement top priority. |
| Bass and deep effects | Compare frequency ranges only when you know the measurement basis, such as −6 dB or −10 dB. Listen to low elements on a familiar second system too. | I want to assess low musical and sound-effect elements without relying only on a figure in the specifications; around 29% of consumers prioritise bass monitoring. |
| Connecting to your setup | Note the outputs on your computer or interface and compare them with the inputs and cables included with the exact version. | I want to use my existing laptop or audio interface without choosing an incompatible connection; around 21% of consumers start by checking connectivity. |
| Complete stereo pair | Check whether the box contains one monitor or a pair, and which power and signal cables are included. | I want to know straight away how many speakers I need for stereo and which connection accessories are included; around 14% of consumers prioritise a complete stereo setup. |
The Genelec 8010A is sold individually, while the PreSonus Eris 3.5 2nd Gen version mentioned here is a pair. You’ll need two Genelec monitors for stereo playback.
Before buying, check what’s included in the box and compare it with the number of speakers you need.
With two separate monitors, check the required power supply and signal connection for each one.
Kali lists 39 Hz at −10 dB for the LP-UNF, while Genelec lists 67 Hz at −6 dB for the 8010A. These figures use different measurement conditions, and your room also affects what you hear.
Check the dB condition for each specification and listen to the low elements in your score on a familiar system as well.
If you can’t position the speakers properly around your listening spot, this may affect how you assess the stereo image. Genelec notes that placement, height and reflections also play a part.
Measure the space beside your screen and plan your listening setup before choosing a size.
PreSonus describes the Eris 3.5 2nd Gen as a compact pair for uses including music production and video work.
The D3V is an active desktop system for a compact stereo setup, with USB-C playback or an analogue TRS connection.
Kali positions the LP-UNF as a stereo pair for mixing at a desk.
The 8010A is a compact active monitor sold individually, for a setup with suitable XLR connections.
The 305P MkII is an active nearfield monitor for setups with room for two larger cabinets and analogue outputs available.
Position the monitors symmetrically to the left and right, and point them towards your listening spot. Genelec recommends a 60° angle between monitors for music production, ideally with the listener at the tip of an equilateral triangle. Take the space on your desk and in your room into account.
It depends on the monitors’ connections and your laptop’s outputs. ADAM Audio lists USB-C audio for the D3V, and Kali does the same for the LP-UNF; PreSonus lists analogue inputs for the Eris 3.5 2nd Gen. Check the connections on the exact version before choosing cables.
First, check the placement and listening position, as Genelec notes that reflections and room resonances affect what you hear. Also assess deep elements on a second, familiar listening system, and don’t base your judgement solely on the lowest frequency in a product specification.
For a standard online product purchase, ACM ConsuWijzer generally describes a 14-day cooling-off period that ends 14 days after delivery, with some exceptions. According to the Dutch Government, the Netherlands has no fixed statutory guarantee period; if a product is faulty, contact the seller to resolve the issue.