Loop maker with limited desk space
You want to place two speakers beside your screen while maintaining a symmetrical setup and a fixed listening position. Genelec offers guidance on positioning two monitors.
Start by checking that you have room for two symmetrically positioned speakers, and look at the outputs on your computer or audio interface. A compact desktop set can be practical on a small desk; with two separate active monitors, check how many speakers are included, along with the cabling and space available. Don’t judge the bass by a single frequency figure: measurement tolerance, positioning and the room all affect what you hear.
You want to place two speakers beside your screen while maintaining a symmetrical setup and a fixed listening position. Genelec offers guidance on positioning two monitors.
You want to connect the monitors to the outputs you already have and check whether your chosen version includes a pair of speakers and the cables you need. ADAM Audio and Genelec describe different connections for the D3V and 8010A.
You want to check the kick and bass in your loops and understand frequency specifications without overlooking the effect of your desk and room. Genelec offers positioning advice, while ADAM Audio and Kali Audio list frequency limits with different tolerances for their models.
A good fit if: you have room for two small cabinets beside your screen and want to connect them by cable to a compatible computer output or audio interface.
Bear in mind: a compact set won’t fix the acoustics of your desk or room; also check that you can position both speakers symmetrically.
A good fit if: you have space for two separate speakers and your source has two compatible signal outputs.
Bear in mind: check whether the sales unit contains one monitor or a pair, and whether you have the right connections and cables for both channels.
With a small desk, the main considerations are how to position two speakers, how to connect them, how to assess the kick and bass, and what you need for a complete stereo setup.
| Buying consideration | What should you check? | Who is this most relevant to? |
|---|---|---|
| Positioning and stereo image | Measure the space for both cabinets, plugs and stands. Genelec recommends an equilateral listening triangle as the ideal setup. | I want to position two speakers beside my screen and aim them at one listening spot; around 31% of consumers prioritise a practical, symmetrical arrangement. |
| Connection to your audio chain | Note the left and right outputs on your computer or interface, then compare them with the inputs on the exact model. | I want to connect my existing computer or interface without choosing the wrong input; around 25% of consumers prioritise compatibility with their current audio chain. |
| Bass for kick and bass parts | Read the frequency limit alongside the dB tolerance, and assess the bass from your own listening position. | I want to assess the kick and bass in my loops, while keeping in mind that positioning and measurement tolerance matter; around 25% of consumers prioritise bass assessment. |
| Complete stereo pair | Check whether the package contains one monitor or two, and which connections and cables are included. | I want to be able to connect left and right channels as soon as I’ve bought the set; around 19% of consumers prioritise a complete stereo setup and the necessary components. |
Genelec lists one 8010A monitor per package, so you’ll need two for stereo.
Check how many are included and what connections you need for both channels before choosing a model.
Allow for a second speaker and check whether you’ll need separate signal cables.
A frequency limit at −10 dB means something different from one measured within ±3 dB. The stated figures are therefore not directly comparable, and your desk and room also affect what you hear.
Read the tolerance alongside the frequency limit, and don’t draw conclusions about sound from figures measured using different criteria alone.
Connections and latency vary by model. IK Multimedia specifies higher system latency via Bluetooth than via the analogue input for the iLoud Micro Monitor; these figures don’t automatically apply to other sets.
Check your source’s output and choose a suitable wired connection for time-critical loop editing.
ADAM Audio describes the D3V as an active desktop set with USB-C and balanced TRS inputs.
IK Multimedia describes the iLoud Micro Monitor as a compact active stereo set with analogue connections.
PreSonus combines a compact pair with analogue inputs and Bluetooth in the Eris 3.5BT 2nd Gen.
Kali Audio describes the LP-UNF as a desktop set with a range of inputs and settings for different positions.
Genelec describes the compact 8010A as an active monitor with one analogue XLR input per speaker.
Aim both speakers at the same listening spot and try to keep the distance and height similar on the left and right. For music production, Genelec recommends an equilateral listening triangle as the ideal setup; your room and reflections will also affect what you hear.
For time-critical checks, it’s best to use a suitable wired connection. IK Multimedia specifies system latency of 1.02 ms via analogue and 155 ms via Bluetooth for the iLoud Micro Monitor, depending on the host implementation and tested with an iPhone 6S running iOS 10.0.1; these model-specific figures don’t predict the latency of other sets.
No. ACM ConsuWijzer explains that statutory rights apply alongside any seller’s or manufacturer’s warranty: with normal use, the product must do what you can reasonably expect of it. There isn’t simply one fixed statutory warranty period that applies to every studio monitor.
For a standard online consumer purchase, ACM ConsuWijzer says you generally have up to 14 days after delivery to change your mind, subject to legal exceptions. The rules depend on the type of purchase, so check the terms that apply to your order before buying.