Who are these options relevant to?

Editor with limited desk space

You want to edit a live session in stereo, but need to fit two speakers next to a screen and point them towards your listening position.

Editor who wants to check detail and connections

You review edits using a computer or audio interface and want to know in advance which wired inputs and listening settings are available.

Editor making decisions about bass

You also need to assess low instruments and want to know what frequency specifications and your workspace acoustics can and can’t tell you.

What should you look for when choosing?

Compact active stereo pair

A good fit if: you have limited space next to your screen and want a complete set.

Bear in mind: a compact cabinet or stated low-frequency limit does not guarantee accurate bass response at your listening position.

Two separate nearfield monitors

A good fit if: you have room to position both speakers appropriately and want to work through, for example, an audio interface.

Bear in mind: you may need two monitors, suitable cables and possibly stands.

What to consider What to check Who is this important for?
Placement and stereo image Measure the available space for both speakers; check that you can point them towards your listening position at the same height and distance. If I want to assess stereo on a small desk, I need to be able to position both monitors properly. Around 40% of consumers make placement their top priority.
Editing detail Check whether you can angle the monitors towards your listening position and what desk or wall settings the model offers. If you want to assess audible differences while editing, pay extra attention to your listening position and possible reflections from the desk. Around 30% of consumers prioritise these details.
Connection to your workspace Note the outputs on your computer or interface, then check which inputs and cables you need. If I want to use my existing computer or interface, the wired connection needs to be compatible. Around 20% of consumers prioritise connection compatibility.
Limits of bass response When checking frequency limits, look at the dB measurement basis and assess the response in your own setup. If I need to assess low instruments, I want to know how the stated limit was measured and how my room affects it. Around 10% of consumers make checking bass their top priority.

Things to consider when buying

  • Mistaking a single monitor for a stereo pair

    Genelec lists the 8020D as one monitor per package, while PreSonus describes the Eris 3.5 2nd Gen as a pair. The package contents determine how many speakers you can actually set up.

    Before buying, check the pack size for the exact offer.

    For a stereo pair made up of separate monitors, you may need a second speaker and possibly extra cables.

  • Comparing low-frequency limits without checking the dB measurement basis

    Kali Audio gives the LP-UNF a frequency response of both 39 Hz at −10 dB and 54 Hz at ±3 dB. You can’t directly compare a frequency limit with another figure unless they use the same measurement basis.

    Only compare figures measured on a like-for-like basis, and assess the result in your own setup.

  • Assuming a small cabinet will fix an awkward desk setup

    Reflections and unequal distances can affect what you hear. A compact size won’t automatically solve an asymmetrical setup or challenging room acoustics.

    First, map out the positions of both monitors and your listening position, and keep the setup symmetrical wherever possible.

    You may need to adjust the setup or acoustics before you can listen comfortably.

Relevant brands to consider

ADAM Audio

ADAM Audio describes the D3V as a compact active desktop system.

  • ADAM Audio lists USB-C and balanced TRS inputs. According to the manufacturer, the D3V comes as a pair with detachable stands and placement switches.
  • The stated lower limit of 45 Hz is at −6 dB. On its own, this figure doesn’t tell you how the bass will sound on your desk.

Kali Audio

Kali Audio describes the LP-UNF as a system for desktop mixing.

  • The manufacturer lists USB-C, balanced TRS and settings for different desk and wall positions.
  • The stated limits are 39 Hz at −10 dB and 54 Hz at ±3 dB. The measurement basis makes a difference when comparing figures.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue set with connections including TRS and RCA.

  • PreSonus lists a pair with volume control and a headphone output on the front.
  • The manufacturer gives 80 Hz as the lower limit. Without the same dB measurement basis, this figure can’t be directly compared with the stated figures for the D3V and LP-UNF.

IK Multimedia

IK Multimedia describes the iLoud Micro Monitor as a compact two-piece set with analogue inputs and Bluetooth.

  • The manufacturer lists RCA and 3.5mm analogue inputs, as well as a desktop setting.
  • For its own test setup, IK Multimedia gives system latency of 1.02 ms via analogue and 155 ms via Bluetooth. These figures apply to the stated test setup and aren’t universal measurements for other devices or situations.

Genelec

The 8020D is a single active nearfield monitor for a setup with two separate speakers.

  • Genelec lists one monitor per package and an XLR input.
  • You need two monitors for a stereo pair. The symmetrical placement Genelec describes requires enough space for both speakers.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors when editing a stereo session?

Point both monitors towards your listening position and try to keep them at equal distances and heights on either side. Genelec recommends a symmetrical setup for stereo monitoring, ideally with the listener at the point of an equilateral triangle. Follow this advice as far as your desk and room allow.

Is Bluetooth suitable as a standard connection when editing?

First, check which wired connection suits your workspace. For the iLoud Micro Monitor, IK Multimedia gives system latency of 155 ms via Bluetooth and 1.02 ms via analogue in its stated test setup. These figures are specific to this model and aren’t universal measurements for other devices or setups.

What should you check about the packaging and warranty?

Check whether the offer includes one monitor or a pair, and which cables are included. In the Netherlands, products that are not of satisfactory quality are covered by a statutory guarantee; according to the Dutch government, there is no fixed statutory guarantee period. Any manufacturer’s guarantee is in addition to this.

Do you have a cooling-off period when buying online in the Netherlands?

When you buy remotely from a business, you’ll often have a 14-day cooling-off period. The Dutch government distinguishes between buying from a business and, for example, buying online from a private individual, so check who the seller is.

Which product safety rules apply to active monitors?

According to Business.gov.nl, anyone selling or trading electrical or electronic equipment in the Netherlands must ensure that the products comply with the applicable European rules. Electrical and electronic products may be subject to rules including CE marking requirements. Don’t assume that a specific item complies solely on the basis of its brand name or model specifications.