Who is this choice relevant to?

Student with a small mixing desk

You want to fit two speakers beside your screen and set them up in a fixed stereo arrangement at close range. The space available on your desk and your connections will help determine which set is practical.

Creator working on different scores

You write and mix for a series of animation projects and want to keep your listening position and monitor settings consistent when comparing them. One KRK model offers different sound modes, but that doesn’t prove that switching between projects will be quicker.

Mixer with an audio interface

You have suitable analogue outputs and can accommodate two separate nearfield monitors. Check that you have two monitors, compatible inputs and the cables you need.

What should you consider when buying?

First, choose a setup and signal path that suit your desk and workflow. Then compare the controls and stated specifications against the conditions in your own room.

Compact active desktop set

A good fit if: you mix close to a small desk and want a desktop setup. Check the computer connection for each model; the ADAM Audio D3V has USB-C.

Bear in mind: according to ADAM Audio, adding a subwoofer to the D3V signal path requires an external audio interface connected via the analogue inputs.

Two separate analogue nearfield monitors

A good fit if: you have room for two speakers and your audio interface has suitable analogue outputs.

Bear in mind: check whether an offer includes one monitor or a pair, and make sure you have the right cables for both speakers.

Concern What should you check? Who is this for?
Consistent stereo assessment Can you position both speakers symmetrically and keep your listening position and settings the same when comparing versions? When I compare successive versions, I want to keep my listening position and monitor settings consistent. About 31% of consumers prioritise repeatable stereo assessment.
Suitable for your desk and room Measure the space for the left and right speakers, and check what positioning settings the model offers. With limited space, I want to fit two speakers without losing my listening setup. About 25% of consumers prioritise how well the speakers fit their desk and room.
Connections to suit your workflow Compare your computer or interface outputs with the USB-C, TRS or XLR inputs on the exact model. When switching between computer use and an audio interface, I want the connections to suit my signal path. About 25% of consumers start by checking how the connections fit their workflow.
A complete stereo pair Check how many speakers are included, and what power supply, connection and audio cables you need. I want to check that my order includes two compatible speakers so I can assess the stereo image. About 19% of consumers prioritise buying a complete stereo setup.

Pitfalls to avoid when choosing

  • Assuming one monitor is a stereo pair

    You need two speakers to assess stereo. An offer may include one monitor or a set.

    Before buying, check what’s included in the exact model and which cables you’ll need.

    If you buy a single monitor, you may need a second one to create a stereo pair.

  • Comparing frequency limits without checking measurement conditions

    ADAM Audio quotes 45 Hz at −6 dB for the D3V, while Yamaha quotes 54 Hz at −10 dB for the HS5. As the measurement conditions differ, these lower limits aren’t directly comparable. Your room and speaker placement also affect what you hear, as Genelec explains.

    Check the measurement conditions for stated frequency ranges and take your own listening space into account.

  • Forgetting about the signal path if you add a subwoofer later

    According to ADAM Audio, a subwoofer can’t be connected directly in the D3V’s USB-C signal path.

    Decide in advance whether you want to work directly from your computer only, or also use a subwoofer via analogue connections.

    According to ADAM Audio, you’ll need an external audio interface to add a subwoofer to the D3V signal path.

Brands to compare

The features below apply to the product lines mentioned and are intended as comparison points, not as an overall judgement of each brand.

ADAM Audio

The D3V is a compact active desktop set for use with a compatible computer or via analogue connections.

  • According to ADAM Audio, the D3V has USB-C and two balanced TRS inputs.
  • According to ADAM Audio, adding a subwoofer to the signal path requires an external audio interface and the analogue inputs.

Kali Audio

The LP-UNF is a desktop solution with settings for different desk and wall positions.

  • Kali Audio describes positioning settings for desk use and for different distances from a wall.
  • These positioning settings don’t remove the influence of your desk, room or listening position.

KRK

The ROKIT 5 Generation Five is an active nearfield monitor designed for a two-speaker setup.

  • KRK describes Mix, Focus and Create modes, along with 25 tuning combinations.
  • When comparing project versions, keep the selected mode the same; a different setting will change the sound.

Yamaha

The HS5 is an active nearfield monitor with balanced XLR and TRS inputs for an analogue stereo setup.

  • Yamaha specifies a frequency range of 54 Hz–30 kHz at −10 dB for the HS5.
  • Don’t compare the lower limit directly with specifications measured on a different basis.

JBL Professional

The 305P MkII is an active nearfield monitor with analogue connections for a stereo setup.

  • JBL Professional describes XLR and TRS inputs and a Boundary EQ setting.
  • JBL’s claims about how the adjustment works come from the manufacturer and don’t, on their own, predict how the monitor will sound in your room.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I assess the stereo balance of my score with one studio monitor?

Not as a stereo pair through two speakers: you’ll need a second monitor for that. Check whether the exact offer includes one or two speakers.

Do I need to reposition the monitors when I switch projects?

For comparable mix decisions, it’s best to keep your listening position and speaker arrangement the same. Genelec points out that both room acoustics and speaker placement affect what you hear; make a note of which adjustable mode you’re using too.

Can a subwoofer connect directly to the ADAM Audio D3V’s USB-C signal path?

According to ADAM Audio, it can’t. To add a subwoofer to the D3V signal path, you’ll need an external audio interface and must use the analogue TRS inputs.

What safety rule applies to an active monitor in the Netherlands?

According to the Netherlands Food and Consumer Product Safety Authority, active electrical studio monitors marketed in the Netherlands must carry the CE mark. Check the information for the specific model; a general product description doesn’t in itself confirm that the item on offer complies.

Can I return a monitor bought online if it doesn’t suit my setup?

For eligible distance purchases, you generally have a 14-day cooling-off period, according to the Dutch government. Check whether your purchase is covered and what information the seller provides about the cooling-off period; purchases from private individuals aren’t covered by the same rules.