Mixer with limited desk space
You have a fixed, compact listening position and need to check whether two monitors can be placed symmetrically and angled towards you. Genelec recommends a symmetrical setup for stereo playback.
Start by choosing a stereo pair that fits symmetrically on your compact workspace and connects to your audio source. Then compare their usable bass response and the options for adapting the monitors to your room. A larger model or a subwoofer may deliver more bass, but it will take up extra space and won’t automatically solve room reflections or resonances.
You have a fixed, compact listening position and need to check whether two monitors can be placed symmetrically and angled towards you. Genelec recommends a symmetrical setup for stereo playback.
You assess elements such as balance and stereo positioning in an acoustic recording. Reflections from your desk and room can affect what you hear. Genelec notes that calibration does not always resolve every acoustic issue.
You also make decisions about low frequencies and are weighing up a compact pair against larger monitors or an additional subwoofer. The stated lower frequency limit is not the same as the bass response you’ll get in your room.
Choose this if: two monitors fit symmetrically on your workspace and you don’t want to use a separate power amplifier.
Bear in mind: compact models may have limited bass response, and check the inputs on each model.
Choose this if: your workspace and listening distance allow enough room, and assessing bass is a priority.
Bear in mind: larger cabinets take up more space. More bass response won’t automatically eliminate room resonances or reflections.
Choose this if: a compact pair doesn’t provide enough bass for your mixing decisions, and you have room to position and tune a subwoofer.
Bear in mind: you’ll need an extra device and connections. Check compatibility and consider the effect of your room.
Choose this if: you want to select your speakers and a suitable studio power amplifier yourself.
Bear in mind: you’ll need extra equipment and must make sure the amplifier and connections are compatible.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Positioning on a compact desk | Measure the space for two cabinets and check whether they can be positioned symmetrically, angled towards your listening position, with their connections and ports unobstructed. | If I need to place two monitors on a small desk, I want to be able to angle them symmetrically without blocking any connections or ports. Around 36% of consumers prioritise positioning on a compact desk. |
| Tonal balance and stereo image | Assess the pair from the same listening position and consider the effect of your desk and room. | When mixing an acoustic recital, I want to assess balance and stereo positioning without overlooking reflections. Around 29% of consumers prioritise tonal balance and stereo image. |
| Low-frequency control | Only compare frequency figures when they use the same measurement basis, and consider whether additional bass response will be useful in your room. | If I also need to assess low frequencies in my mix, I weigh up size against bass response. Around 21% of consumers make bass control their top priority. |
| Connections and complete setup | Check the input type, the output on your audio interface and whether the offer includes one speaker or a pair. | When connecting my audio source, I want to know in advance which inputs and additional equipment my setup will need. Around 14% of consumers prioritise connections and the complete system setup. |
Specifications use a particular measurement basis, while positioning and room acoustics affect what you hear. So a stated frequency limit alone won’t tell you how low a monitor will sound in your room.
Only compare frequency figures if they use the same measurement basis, and assess your setup before choosing additional bass response.
You need two monitors for a stereo mix, but offers may describe either a single speaker or a pair.
Check what’s included in the specific offer before assuming it provides a complete stereo setup.
Passive studio monitors need a suitable external power amplifier; active monitors have amplification built in. The ADAM Audio T5V has a rear-facing bass reflex port, so check the space behind the model too.
First decide whether you want active or passive monitors. Then check the manual, connections and available space behind the monitor.
The Genelec 8010A is a compact active model for a small or mobile listening setup.
ADAM Audio describes the active T5V as a model for small control rooms.
PreSonus offers the Eris 3.5 2nd Gen as a compact pair on its EU product page, including for home studios.
The Yamaha HS5 is an active nearfield model with XLR and TRS inputs and ROOM CONTROL.
The JBL 305P MkII is an active nearfield model with balanced XLR and TRS inputs.
Genelec recommends a symmetrical setup, with the two monitors and your listening position forming roughly the points of an equilateral triangle. Genelec specifies a 60-degree angle between the monitors. Aim both speakers towards your listening position, and be mindful of reflections from your desk and room.
Not always. Genelec says calibration can help, but it may not be enough to resolve all room acoustic issues.
Active monitors have amplification built in; passive studio monitors need a suitable separate studio power amplifier. For either option, check that the connections are compatible with your audio source.
For an online purchase by a consumer, you generally have a statutory cancellation period of up to 14 days after delivery, subject to legal exceptions, according to ACM ConsuWijzer. You’re also entitled to a statutory guarantee if a product doesn’t meet reasonable expectations under normal use. In the Netherlands, there isn’t one fixed guarantee period for all products.
For electrical equipment covered by the relevant EU product rules, the manufacturer must meet safety requirements and provide the required CE marking and EU declaration of conformity, according to Ondernemersplein, the Dutch government’s business portal. For a specific device, check its documentation and make sure the stated supply voltage is suitable. A CE marking alone is not proof of audio quality.