Who are these studio monitors for?

Piano mixers with limited desk space

You want to position two channels around your listening position without a screen or desk edge getting in the way. Genelec recommends a symmetrical stereo setup.

Piano mixers assessing the bass

You want to assess low piano notes, while bearing in mind that a stated frequency limit isn’t necessarily what you’ll hear at your listening position.

Piano mixers with an existing audio setup

You already use a computer or audio interface and want to know whether its outputs will work with the inputs on the monitors you’re considering.

What should you look for when choosing?

Start by considering where you’ll place the stereo pair. Then choose a setup whose connections and any additional components suit your desk and audio equipment.

Compact active stereo pair

A good fit if: you can fit two small speakers either side of your screen and want to use USB-C or compatible analogue connections.

Bear in mind: compact cabinets take up less room, but you still need to position them properly around your listening position.

Two separate nearfield monitors

A good fit if: you can position each speaker separately and your audio setup has the right connections.

Bear in mind: you’ll need two monitors for stereo, as well as suitable connections for the left and right channels.

Desk system with a bass unit

A good fit if: you have room for a separate bass unit as well as the two satellites. Kali describes the IN-UNF as designed for listening at around 0.8 metres.

Bear in mind: you’ll need to find space for all three components and check the connections.

What to consider What should you check? Who is this important for?
Desk and room setup Measure the available width and depth, and check whether both monitors can face your listening position symmetrically. If I’m mixing on a small desk, I want to fit two channels without my screen or desk edge getting in the way. Around 36% of consumers say a practical stereo setup is their top purchasing priority.
Piano bass and tonal balance Read the measurement conditions for the frequency range and listen to familiar piano reference tracks from your final setup. If I’m assessing low piano notes, I don’t want to rely on a frequency figure alone, as the measurement conditions and room affect what I hear. Around 29% of consumers give bass assessment their highest priority.
Connection to your audio setup Compare the outputs on your computer or interface with the inputs on the exact model, and check which cables are included. If I want to keep using my existing computer or audio interface, I want to know in advance whether the connections are compatible. Around 21% of consumers rank compatibility above other purchasing factors.
Complete stereo pair Check whether the listing includes one monitor or a pair, and which cables are supplied. If I want to set up a stereo system, I want to know whether I’ll get two speakers and the necessary connections. Around 14% of consumers make buying a complete stereo setup their top priority.

Pitfalls to avoid when buying

  • Comparing only the lowest Hz figure

    Frequency limits may be stated using different dB conditions, while your room and speaker placement affect what you hear at your listening position.

    Read the measurement conditions for each figure, then assess your final setup using piano reference tracks you know well.

  • Mistaking a single monitor for a stereo set

    Genelec lists the 8010A as one monitor per package, while Yamaha specifies the HS4 as a pair.

    Before buying, check the sales unit and the cables included with the exact listing.

  • Choosing a connection without checking your audio source

    The models discussed have different connections, including USB-C, XLR, TRS, RCA and a stereo mini-jack. An input won’t necessarily match the output on your computer or interface.

    First make a note of your source’s outputs, then compare them with the inputs on the exact model.

Brands to consider

ADAM Audio

The D3V is an active desktop stereo pair for a small workspace, with USB-C playback and balanced analogue TRS inputs.

  • ADAM Audio lists placement switches and detachable stands.
  • The stated low-frequency limit is 45 Hz at −6 dB; this isn’t an independent measurement taken on your desk.

Genelec

The 8010A is a compact active monitor sold individually, for a setup with two separate speakers.

  • Genelec gives dimensions of 195 × 121 × 115 mm including the Iso-Pod, and lists one analogue XLR input per monitor.
  • You’ll need two units for stereo. The stated low-frequency limit is 67 Hz at −6 dB.

Yamaha

The HS4 is a compact active stereo pair with several analogue connection options and settings to adjust it to your setup.

  • Yamaha specifies XLR/TRS combo, RCA and stereo mini-jack inputs, as well as ROOM CONTROL.
  • Each cabinet is 150 mm wide, and the left cabinet is 213 mm deep. Yamaha states 83 Hz at −3 dB and 60 Hz at −10 dB; these measurement limits aren’t directly comparable.

Kali Audio

The IN-UNF is a desk system with two satellites and a separate bass unit.

  • Kali specifies a listening distance of around 0.8 metres, USB-C, balanced TRS and placement settings.
  • The bass unit needs its own space. The manufacturer’s claims about playback aren’t an independent assessment of piano mixes.

IK Multimedia

The original iLoud Micro Monitor is a compact active stereo set with analogue connections for desktop use.

  • According to IK Multimedia, the package contains two speakers and a linking cable; the inputs are RCA and 3.5 mm stereo.
  • Bluetooth is included, but for critical mixing, check the relevant connections and usage conditions for the exact model.

Joybuy products for this topic

Related products coming soon.

Frequently asked questions

How should I position two monitors on a small desk?

Aim both monitors at your listening position and try to keep them at the same height and distance. Genelec recommends an ideal listening triangle, with a 60° angle between the monitors. Check whether you can achieve this setup on your desk.

Do I need an audio interface for piano mixes?

Not necessarily if you’re sending audio from a compatible computer to the ADAM Audio D3V via USB-C. If you use analogue equipment, compare its outputs with the inputs on your chosen model. For example, each Genelec 8010A monitor has an XLR input.

Can I place the Yamaha HS4 close to a wall?

Keep the bass-reflex port at the back clear; Yamaha warns that covering it will reduce sound quality. Yamaha says ROOM CONTROL can help counter excessive bass when the speakers are placed near a wall, but it’s no substitute for a suitable setup.

What if a monitor I bought online isn’t right for me or develops a fault?

When buying from a business at a distance, you’ll often have a 14-day cooling-off period. Check the applicable terms and exceptions. The Dutch government says that if you have a problem with a product, you should ask the seller to resolve it.

What rules apply to electric studio monitors in the Netherlands?

According to Business.gov.nl, sellers of electrical or electronic equipment must ensure their products comply with the applicable European rules. This does not in itself mean that a specific item has been individually checked.