Who are these monitors for?

Recording comparer

You regularly compare takes or final files and don’t want to mistake differences in loudness for differences in sound. Keep the monitor setting the same and measure the files separately; EBU R 128 covers programme loudness measurements, while Genelec explains how to set monitor levels at the listening position.

Changing desk height

You switch between sitting and standing and want both speakers to be positioned comparably at either height and remain directed towards your ears. Genelec recommends angling monitors towards the listening position.

Creator with limited desk space

You’re looking for a stereo pair that fits beside your screen and can connect to your computer or audio interface. A compact set and separate nearfields call for different choices when it comes to positioning and cabling.

What should you look for when choosing?

What to consider What should you look for? Who is this important for?
Comparing recording levels Keep the monitor setting the same and measure the programme loudness and, where needed, the files’ true peak. EBU R 128 covers these measurements for broadcast programmes; its target value isn’t automatically a requirement for other uses. If you want to compare recordings under the same listening conditions, keeping a fixed monitor setting and measuring each file separately is important. Around 40% of consumers put level comparison first.
Listening position when sitting and standing Check the available space, stability and cable slack at both desk heights. Make sure the left and right speakers are positioned similarly and remain directed towards your listening spot. If you switch between sitting and standing while you work, you’ll want both speakers to remain suitably positioned at either height. Around 30% of consumers prioritise a setup that works at two desk heights.
Connections and stereo pair Check that your audio source’s outputs match the model’s inputs, and whether you’re buying one monitor or a stereo pair. The Yamaha HS5 is packaged individually. If you want to check in advance that your source can be connected and that you’ll have two channels, it’s worth checking both. Around 20% of consumers prioritise suitable connections and a complete stereo pair.
Bass response in your room Compare frequency specifications only when they use the same measurement basis, and assess the setup at your own listening position. A stated low-frequency limit doesn’t tell you what you’ll hear at your desk. If you mainly assess recordings where checking the bass is important, both the measurement conditions and positioning matter. Around 10% of consumers put bass assessment first.

Common pitfalls

  • Using a different sound setting for every recording

    You’re no longer comparing under the same listening conditions. Different monitor settings make the comparison uneven.

    Set a fixed monitor setting and listening position, and measure the loudness of the files separately.

  • Mistaking a single monitor for a stereo pair

    A monitor sold individually won’t automatically give you the two speakers you need for a stereo setup.

    Check how the exact model is sold and whether your source is compatible with its connections. A stereo pair of separate monitors may require a second monitor and suitable cables.

  • Looking only at the stated low-frequency limit

    Manufacturers specify frequency limits under particular measurement conditions; your room and speaker positioning affect what you hear at the listening position.

    Compare specifications using the same measurement basis, and assess the setup at the desk heights you use.

  • Assuming room calibration comes with every Genelec monitor

    Genelec describes GLM for SAM systems; the 8010A and 8330A are different models and don’t have the same features.

    Check the exact model you’re choosing and what measurement equipment you need for the GLM procedure you want to use. The GLM Calibration Kit described includes a reference microphone and network adaptor, among other items.

Brands to compare

ADAM Audio

ADAM describes the D3V as a compact active desktop set with USB-C and balanced TRS connections. The T5V is a separate nearfield monitor with a 5-inch woofer and a rear bass-reflex port.

  • The D3V offers a different connection and positioning option from two separate monitors.
  • The stated frequency limits don’t, on their own, tell you how the set will perform at your desk. For a subwoofer in the D3V signal chain, ADAM describes an additional analogue connection route via an audio interface.

Yamaha

The HS5 is a separate active nearfield monitor with XLR/TRS connections and ROOM CONTROL and HIGH TRIM controls.

  • The controls let you make manual adjustments when assessing speaker placement.
  • Yamaha lists the HS5 as one monitor per package. The controls don’t automatically compare loudness.

Genelec

According to Genelec, the 8010A has room compensation controls; the 8330A is part of the SAM range, for which Genelec describes GLM calibration.

  • The models offer different options for manual adjustment or GLM calibration.
  • The GLM functionality of the 8330A shouldn’t be attributed to the 8010A. The calibration kit described includes a reference microphone and network adaptor, among other items.

JBL Professional

The 305P MkII is a separate analogue monitor with XLR/TRS connections, adjustable input sensitivity and Boundary EQ.

  • JBL describes adjustment options for assessing how positioning affects the sound.
  • These product features aren’t, on their own, an independent assessment of performance at a sit-stand desk.

KRK

KRK describes the ROKIT 5 Generation Five as a separate active 5-inch monitor with Mix, Focus and Create settings, plus adjustable boundary EQ.

  • The manufacturer describes several sound settings for different tasks.
  • When comparing recordings, keep the setting the same. Claims about accuracy and intended use come from the manufacturer and aren’t based on an independent listening test.

Joybuy product picks

Related products coming soon.

Frequently asked questions

Will new monitors automatically match the levels of my recordings?

No. Keep the monitor setting the same and use a loudness meter to measure the recordings. EBU R 128 covers programme loudness and true peak for broadcast material; don’t automatically apply the broadcast target value to another delivery platform.

Do I need to readjust my setup when I switch from sitting to standing?

At both desk heights you use, check that the speakers point towards your listening spot and are positioned similarly on the left and right. If your listening position or setup changes, also consider whether your existing level and room adjustments are still suitable.

What might I overlook when putting together my monitor setup?

Check whether you’re buying one monitor or a stereo pair, and which cables are compatible with your source’s outputs. The HS5 and Genelec 8010A are described as separate monitors; the Calibration Kit includes a microphone and adaptor, among other items, for the GLM measurement procedure mentioned.

What are my rights when buying online in the Netherlands?

According to ACM ConsuWijzer, online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to exceptions. Statutory guarantee rights also apply if a product doesn’t provide what you could reasonably expect under normal use; the retailer is your point of contact.

Can I use studio monitors at any volume at home?

The Dutch Government states that noise nuisance affecting neighbours is covered by the General Local Bye-laws in many municipalities. The applicable rules and circumstances vary by municipality, so a speaker’s stated maximum volume doesn’t give you permission to cause a nuisance.