Editor working alongside colleagues
You edit recordings while other people work in the same room. Agree when speaker playback is possible, and consider disruptive noise in the workplace, as described by Arboportaal.
First, agree whether you can listen through speakers at set times: choosing smaller monitors alone won’t prevent them disturbing your colleagues. Then compare a stereo pair that suits your connections and listening position, and check your rehearsal recordings using another listening method if needed.
You edit recordings while other people work in the same room. Agree when speaker playback is possible, and consider disruptive noise in the workplace, as described by Arboportaal.
You have limited or asymmetrical space for positioning your monitors and want to avoid your desk and walls having too much influence on what you hear. Genelec’s positioning guidelines and the settings recommended by Kali Audio can help you assess your setup.
You want to connect a stereo system directly to a compatible computer. Compare USB-C with analogue connections and check which option suits your computer, as shown in the product information from ADAM Audio, Kali Audio and Yamaha.
Suitable if: you want to play audio directly from a compatible computer and have space on both sides of your screen.
Keep in mind: check the digital audio chain; USB-C alone doesn’t tell you what resolution will be used for playback.
Suitable if: your interface has the right analogue outputs and you can position two monitors properly.
Keep in mind: check whether the monitors are sold individually and whether you have the right cables.
Suitable if: speaker playback would disturb colleagues or there’s no suitable stereo listening position.
Keep in mind: this is a way of working, not a claim that headphones offer the same spatial assessment as a properly positioned stereo pair.
| What to consider | What should you check? | Who should consider this? |
|---|---|---|
| Disturbing colleagues | Agree when speaker playback is possible and decide whether the workplace is suitable for it. | If I want to check recordings while other people are working, I need to know when I can do so without disrupting them. Around 33% of consumers prioritise being considerate of colleagues. |
| Listening position and desk | Measure the space available for two monitors and check whether you can angle them towards your listening position at a similar height and distance. | If my desk has limited space, I need to know whether I can create a suitable, symmetrical listening position on the left and right. Around 27% of consumers prioritise their desk setup. |
| Computer connection | Check your computer, any audio interface, the connections on both monitors and the required playback resolution. | If I want to use my existing computer or interface, I need to know in advance which connection option and resolution will suit it. Around 20% of consumers prioritise compatibility with their existing equipment. |
| Complete stereo pair | Check whether the box contains one monitor or a pair, and what you need to connect both channels. | If I want to listen to the left and right channels, I need to know exactly what’s in the box and which connections I’ll still need. Around 20% of consumers prioritise a complete two-channel system. |
Some models are sold individually. One monitor isn’t a complete left-and-right stereo system.
Before buying, check what’s included in the box and what you’ll need for two channels.
Manufacturers may quote frequency limits using different tolerances. For example, Genelec lists 67 Hz at −6 dB for the 8010A, while Yamaha lists 54 Hz at −10 dB, among other figures, for the HS5. These values aren’t directly comparable.
Compare figures only when they use the same measurement basis, and also take positioning and the room into account.
ADAM Audio states that the D3V uses internal DSP processing at 48 kHz/16-bit over USB. According to ADAM Audio, this means 96 or 192 kHz files aren’t played back in their original form.
Check your editing chain’s requirements against the specified resolution for the connection option you choose.
If you need a specific playback resolution, you may need a different connection option or interface.
The D3V is a compact active desktop system with USB-C; the T5V is a separate analogue nearfield monitor.
The LP-UNF is designed as a complete ultra-nearfield system for a desk.
The HS5 is an active analogue nearfield monitor sold individually.
The 305P MkII is an active analogue nearfield monitor with settings for positioning by a desk or wall.
The 8010A is a compact monitor with an analogue XLR connection.
Angle both monitors towards your listening position and aim for a symmetrical setup at the same height. Genelec describes a 60° angle between the left and right monitors as the ideal stereo setup; consider what’s practical in your office.
No. Arboportaal distinguishes between disruptive noise as a workplace risk and harmful exposure. A limit for harmful exposure doesn’t mean you can use monitors at that level in a shared workspace.
Yes. Recheck the symmetry, direction and positioning settings. According to Genelec, monitor placement and reflections affect what you hear.
For a consumer purchase, the seller is responsible for the statutory guarantee; a manufacturer’s guarantee doesn’t replace this right. ACM ConsuWijzer explains that if a product breaks too soon under normal use, the seller must put it right free of charge, for example by repairing or replacing it. If you’re buying in a company’s name, check which terms apply.
For electrical and electronic equipment, the Dutch government describes the applicable safety requirements and the EU Declaration of Conformity required when the relevant conformity requirements apply. A general information page doesn’t confirm that an individual model or imported variant meets them; check the specific version with the seller.