Who are studio monitors suitable for?

Editor with limited desk space

You want to check spoken intros through two speakers while leaving room for your screen, keyboard and colleague. Measure the available width and depth, and decide where you’ll listen. ADAM Audio explains how to position monitors in relation to your listening spot.

Editor who switches between sources

You might use a computer and an audio interface, for example, and want to know in advance which inputs, cables and headphone controls will suit your workflow. Compare the connections on the exact version with the outputs on your equipment.

Editor working alongside colleagues

Sometimes you can listen through speakers, but at other times you need to work quietly with headphones. An easily accessible headphone socket and a suitable setup may therefore be important; PreSonus and Yamaha list these connections on the versions discussed here.

What should you look for when choosing?

Start by considering the space for both speakers and your listening spot. Then compare the connections and how easily you can keep working quietly.

Consideration What should you check? Who is this important for?
Positioning on a shared desk Measure the space for both cabinets, cables and your listening spot. Compare the dimensions of each speaker and check that any supplied stands will fit. I want to position two speakers without crowding the space for my screen, keyboard or colleague. Around 33% of consumers prioritise how well they’ll fit.
Checking spoken intros Only compare specifications when the measurement conditions are comparable. Position the speakers at your listening spot and listen to one of your own speech recordings at a normal working volume. I want to assess the voice and recording without relying on just one specification; positioning and the room matter too. Around 27% of consumers give speech monitoring top priority.
Connecting and operating Make a note of the outputs on your computer or interface, then check which inputs, cables and headphone controls are available on the exact version. I switch between sources and don’t want to discover after buying that the connections aren’t compatible with my equipment. Around 20% of consumers prioritise connections and controls.
Working quietly Decide when you can use speaker playback and check whether the headphone socket is easy to reach. I need to keep working when colleagues can’t listen through speakers; in that case, a headphone option matters more than being able to use the speakers more often. Around 20% of consumers give working quietly top priority.

Things to consider before buying

  • Assuming an image showing two speakers means you’re buying a pair

    Packaging can vary by model: Genelec lists one 8010A per box, while Yamaha specifies the HS3 as a pair.

    Check what’s included with the exact version. You’ll need two 8010A units for a stereo pair.

  • Assuming small monitors will sound the same wherever you put them

    The position of the speakers in relation to your listening spot, desk and nearby walls affects what you hear. ADAM Audio recommends positioning the two monitors and the listener at the points of an equilateral triangle.

    Plan your setup in advance and assess the speakers where you actually intend to use them.

  • Using Bluetooth for video editing without checking first

    Under its own test conditions, IK Multimedia lists system latency of 155 ms over Bluetooth and 1.02 ms through the analogue input for the iLoud Micro Monitor. These figures don’t automatically apply to other equipment or connections.

    If the picture and spoken intro need to stay in sync, check the latency of your entire setup and consider a wired connection.

  • Confusing a manufacturer’s warranty with all your legal rights

    According to ACM ConsuWijzer, your statutory rights exist alongside any manufacturer’s or seller’s warranty. What you can reasonably expect in terms of product lifespan depends on the product and the circumstances.

    Keep your proof of purchase and the product description. If a product doesn’t perform as it should under normal use, contact the seller.

Brands to compare

ADAM Audio

ADAM Audio describes the D3V as an active desktop stereo set with a computer connection and several positioning options.

  • ADAM Audio lists USB-C, two balanced TRS inputs, room controls and detachable stands for the D3V.
  • These details don’t tell you how the monitors will sound on your desk or how other models from the brand perform.

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a compact pair for analogue sources, with headphone controls.

  • PreSonus lists TRS, RCA and stereo mini-jack inputs, a headphone output on the front, and high- and low-frequency controls.
  • The stated frequency range of 80 Hz–20 kHz isn’t, by itself, an independent assessment of how speech sounds. Also make sure you’re comparing the 2nd Gen, not an older E3.5 version.

Yamaha

According to Yamaha’s European specifications, the HS3 is an active analogue stereo set with several types of input.

  • Yamaha lists two combo inputs, RCA, stereo mini-jack, a headphone output, and low- and high-frequency switches.
  • The stated depth is 189 mm for the left cabinet and 177 mm for the right. Also check the mains voltage marking on the unit.

IK Multimedia

IK Multimedia describes the iLoud Micro Monitor as a compact two-piece set for desks with limited space.

  • The manufacturer lists a width of 90 mm per speaker, RCA and 3.5mm stereo inputs, and Bluetooth.
  • According to IK Multimedia, system latency is higher over Bluetooth than through the analogue input under the stated test conditions. A wired connection is therefore a better choice for video editing.

Genelec

Genelec describes the 8010A as a compact active monitor for use with a suitable audio output.

  • Genelec lists a width of 121 mm, an XLR input and room controls.
  • The box contains one speaker. You’ll need two for stereo; Genelec’s claims about accuracy aren’t a test of how it will sound on your shared desk.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

How should I position two monitors on a shared desk?

Angle both speakers towards your usual listening spot and try to form an equilateral triangle with your head. Also check the height and the effect of the desk and nearby walls; room controls on the speakers are no substitute for careful positioning.

Do I need a separate amplifier or audio interface?

You don’t need a separate power amplifier for the active speakers discussed here. An audio interface isn’t essential for every set: compare the outputs on your computer or interface with the inputs on the exact version, such as USB-C on the ADAM Audio D3V or XLR on the Genelec 8010A.

How can I check whether I’m buying a pair or a single monitor?

Check what’s included with the exact version rather than relying on the product image. Genelec lists one 8010A per box, while Yamaha specifies the HS3 as a pair; you’ll need two individual monitors for stereo.

What warranty and cancellation rights apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, the seller is responsible if a product doesn’t perform as you could reasonably expect under normal use; statutory rights don’t come with a fixed two-year time limit. The Dutch government says that a 14-day cooling-off period applies to many online purchases from businesses, although there are exceptions. Before buying, check who the seller is and which terms apply to your order.

Do active monitors sold in the Netherlands need a CE mark?

For electrical equipment placed on the Dutch market under the relevant European rules, Ondernemersplein describes the required conformity assessment, CE marking and EU declaration of conformity by the manufacturer. Versions with Bluetooth are also subject to the relevant radio equipment rules. A product description alone doesn’t confirm that a specific unit meets these requirements.