Editor with limited desk space
Edits rehearsal recordings on a shared desk and needs to fit two speakers without taking up too much room. ADAM Audio and Kali Audio desktop models include features designed for this kind of setup.
Start by choosing a stereo pair that you can position symmetrically at your listening spot and connect to your computer or audio interface. Compact active desktop systems are a practical option when space is limited. Separate nearfield monitors or a system with room calibration may suit different connections or a changing setup, but settings cannot solve every placement or room-acoustics problem.
Edits rehearsal recordings on a shared desk and needs to fit two speakers without taking up too much room. ADAM Audio and Kali Audio desktop models include features designed for this kind of setup.
Wants to assess individual parts, panning and unwanted sounds, so takes speaker symmetry and the room’s influence into account. Genelec recommends aiming the speakers towards the listening spot.
Switches between speakers and private listening, and looks for accessible controls, suitable inputs and a convenient headphone socket. The standard PreSonus Eris 3.5 2nd Gen, for example, has a headphone socket on the front.
Start by checking there’s room for two speakers and that they’ll work with the outputs on your computer or audio interface. Then compare the listening features and what’s included in the box.
| What to consider | What to check before buying | For which consumers |
|---|---|---|
| Desk placement | Measure to see if both speakers will fit, and check that you can position them at the same height and symmetrically towards your listening spot. | If I share my desk with others, I need room for two evenly positioned speakers; around 36% of consumers say placement is their main concern. |
| Assessing the recording | Only compare the stated frequency range when the measurement tolerance is the same, and bear in mind the effects of placement and room reflections. | When editing, I want to assess individual parts and balance from my listening spot; around 29% of consumers put this first. |
| Switching to headphones | Check whether there’s a headphone output, whether the speakers mute when headphones are connected, and whether the controls are still easy to reach. | When others are working at the desk, I want to listen privately without using the speakers; around 21% of consumers say switching between listening options is their main concern. |
| Connections and what’s included | Make sure the inputs work with your computer or interface, and check whether you’re buying a pair or a single monitor and which cables are included. | I want to connect the speakers to my existing equipment and know whether I’m buying a complete stereo system; around 14% of consumers say connections and box contents are their main concern. |
The Genelec 8010A is sold as a single monitor, while the PreSonus Eris 3.5 2nd Gen is sold as a pair. So ordering one monitor may not give you the stereo sound you want.
Check exactly what’s included in the box and which connections you’ll need before comparing models or offers.
A stated lower limit at −10 dB is not directly comparable with one at −6 dB or ±3 dB.
Only compare frequency ranges measured on the same basis, and use another listening reference for important decisions about bass.
Placement and room reflections affect what you hear. Genelec notes that calibration may not resolve every acoustic problem.
First check whether the speakers can be positioned symmetrically and at a suitable height. Then decide whether you need additional correction.
Changing the placement or adding acoustic treatment may take extra time and resources.
The features below apply to the models and product variants named here; they are not a general recommendation for an entire brand.
The D3V is a desktop system; the A4V is a standalone nearfield monitor.
Kali Audio says the LP-UNF is designed for close-range listening at a desk.
The iLoud Micro Monitor Pro is a compact monitor with built-in ARC X room calibration.
The 8010A is a compact active monitor for setups with suitable analogue connections.
The standard Eris 3.5 2nd Gen is sold as a compact analogue stereo pair.
Aim both speakers towards your listening spot and try to position them symmetrically and at the same height. For stereo monitoring, Genelec recommends a 60° angle between the speakers, viewed from the listening position. Treat this as a guideline, not proof that every shared desk is acoustically suitable.
The manufacturers list a digital USB-C input for the ADAM Audio D3V and Kali Audio LP-UNF. Check that the connection is compatible with your equipment; the Genelec 8010A has an analogue XLR input on each monitor.
Not necessarily. IK Multimedia lists built-in ARC X for the iLoud Micro Monitor Pro, but Genelec says calibration may not resolve every acoustic problem. So start by positioning the speakers symmetrically in a suitable location.
No. According to the Dutch government, the Netherlands has no fixed statutory warranty period of exactly two years. If a product doesn’t have the qualities you could reasonably expect, you should contact the seller. What’s reasonable depends in part on the product and the circumstances.
Electrical and electronic equipment covered by the rules must meet European safety requirements. The Dutch government’s Ondernemersplein website says that the manufacturer must affix a CE mark to an electrical appliance covered by the rules and draw up an EU Declaration of Conformity. A product listing alone doesn’t confirm that a specific item on offer meets these requirements.