Who are these monitors for?

Editor with limited desk space

You share the desk and want a stereo system that takes up little permanent space. Check the cabinet dimensions, cables and room for a practical listening triangle; Genelec recommends positioning yourself at one point of an equilateral triangle.

Editor who wants to listen back with precision

You review edits, balance and placement in a live session, and can make time for a symmetrical setup. Genelec points out that both monitor position and listening position matter.

Editor with an existing audio interface

You want to connect the monitors to the outputs you already use and check in advance whether you need a second speaker or different cables. Check the connections and what’s included for each model.

What should you look for when choosing?

Start with the available desk space and listening position, then check the connections and only after that compare the stated bass response.

What to consider What should you check? Who should pay particular attention?
Listening balance Can you position the monitors at a similar height and distance, angle them towards your listening position and minimise distracting reflections? If you want to assess the balance and stereo placement of a live session, prioritise a symmetrical listening position; around 33% of consumers put listening balance first.
Desk space Check the dimensions of each speaker, space for both monitors, and room for power supplies and cables. If you share the desk or regularly rearrange it, you’ll want to know whether a stereo pair will really fit; around 27% of consumers put desk space first.
Connections Compare your source’s outputs with the monitors’ inputs, and check whether you need to listen in sync with the picture or performance while editing. If you already have an interface, you’ll want to know whether the connections are compatible and suit your workflow; around 20% of consumers give connections top priority.
Complete stereo setup Check whether the offer is for one monitor or a pair, which cables are included and which connections you’ll need. If you need a complete left-and-right setup, you’ll want to know what’s in the box beforehand; around 20% of consumers focus mainly on getting a complete stereo setup.

Common buying mistakes

  • Using the lowest Hz figure to rank monitors

    Manufacturers may state frequency limits at different measurement levels, while your desk and room also affect what you hear at the listening position. So a lower stated figure is not, by itself, a reliable basis for comparison.

    Only compare figures when they use the same measurement basis, and first check that you can position the monitors properly.

  • Mistaking a single-unit price for a complete stereo set

    What’s included varies by model: Genelec lists one 8010A per package, Yamaha sells the HS5 in a single-unit package, while IK Multimedia specifies the iLoud Micro Monitor as a pair.

    Check what’s included in the specific offer and make sure you have both a left and a right speaker.

  • Assuming every input is suitable for every type of editing

    Connections vary by model. IK Multimedia reports system latency of 1,02 ms via analogue input and 155 ms via Bluetooth for the iLoud Micro Monitor; the Bluetooth figure depends on the host device’s implementation.

    Compare your interface’s outputs with the monitors’ inputs. If you need to listen back in sync, check that your chosen connection works in sync throughout your entire setup.

Brands to consider

Kali Audio

Kali Audio describes the LP-UNF as an ultranearfield stereo pair for desk use, with settings for different desk and wall positions.

  • Kali Audio lists USB-C, Bluetooth, RCA and balanced TRS inputs.
  • Kali Audio’s claims about clear sound and positioning against a wall are manufacturer claims. Check your setup; settings won’t automatically eliminate the effects of the wall and room.

IK Multimedia

The iLoud Micro Monitor is a compact active stereo pair supplied with a connecting cable, worth considering when desk space is limited.

  • IK Multimedia lists RCA and 3.5mm inputs for wired connections.
  • The published specifications don’t list a balanced analogue input. Don’t compare the stated 45 Hz at −10 dB directly with figures measured at −6 dB or ±3 dB.

Genelec

The 8010A is a small active monitor sold individually, with an XLR input and room compensation switches.

  • Genelec lists the 8010A’s dimensions and room compensation features.
  • Genelec states that each package contains one monitor. You’ll need two for a stereo set, so check that the connection is suitable too. The stated bass cut-off of 67 Hz is measured at −6 dB.

ADAM Audio

ADAM Audio positions the T5V as an active nearfield monitor for small control rooms.

  • ADAM Audio lists a 5-inch woofer, analogue connections and a rear bass reflex port.
  • ADAM Audio’s claim about a wide listening position comes from the manufacturer. With this monitor too, check the distance, symmetry and effect of the room.

Yamaha

The HS5 is an active nearfield monitor supplied individually, with XLR and TRS inputs and adjustable ROOM CONTROL and HIGH TRIM functions.

  • Yamaha lists ROOM CONTROL and HIGH TRIM for the HS5.
  • Yamaha states a frequency range of 54 Hz–30 kHz at −10 dB and 74 Hz–24 kHz at −3 dB. These figures use different measurement levels, so don’t base a comparison on the lowest Hz figure alone. If you’re buying a stereo setup, check that you order two units.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors when editing a live session at a desk?

Angle both monitors towards your listening position and try to place them at the same height and symmetrically. Genelec ideally recommends a listening triangle with a 60° angle between the monitors; your desk and room can still affect what you hear.

Can I use Bluetooth if the picture and sound need to stay in sync?

Check the latency of the entire connection before choosing Bluetooth for listening back in sync. IK Multimedia reports 155 ms via Bluetooth for the iLoud Micro Monitor, compared with 1,02 ms via analogue input; the Bluetooth test depends on the host implementation, and these figures don’t automatically apply to other devices or combinations.

Should I order one monitor or two?

You need a left and a right monitor for stereo playback. Genelec lists one 8010A per package and Yamaha sells the HS5 in a single-unit package, while IK Multimedia specifies the iLoud Micro Monitor as a pair. Always check what’s included in the specific offer.

What can I do if the monitors produce too much bass or the stereo placement sounds unclear?

First check the positioning and left-right symmetry: reflections and the room affect what you hear. Then see whether the specific model has positioning or room settings; these settings don’t replace assessing your setup.

What Dutch rules apply when buying active monitors?

Electrical equipment placed on the market in the Netherlands must meet the applicable European requirements. For compliant products, the responsible manufacturer must affix the CE marking and draw up an EU declaration of conformity. Business.gov.nl explains that CE is not a quality mark. Online purchases often come with a statutory 14-day cooling-off period; check whether it applies to your specific purchase.