Guitarist with a small desk
You want to fit two monitors alongside your recording equipment while keeping a practical listening position.
First, check that two speakers will fit and can be positioned properly in relation to where you sit; then choose inputs that match your audio interface. Compact models vary in their connections and stated bass response, while USB-C or a new monitor alone won’t solve latency in your recording chain.
You want to fit two monitors alongside your recording equipment while keeping a practical listening position.
You record through an interface and want to know which connections and monitoring setup will work for you.
You assess your guitar alongside other tracks and want to consider how your desk and room affect what you hear.
First, check that a stereo pair will fit on your desk and work with your listening position. Then compare the connections and the conditions under which the specifications were measured.
| What to consider | What should you check? | Who should consider this? |
|---|---|---|
| Space and positioning | Measure the width and depth of each cabinet, allow room for cables and check that both monitors can be positioned symmetrically towards your listening position. | If my desk has limited space, I want to know whether both cabinets will fit and can be positioned properly. Around 36% of consumers prioritise the physical setup. |
| Connections and monitoring | Compare your interface’s outputs with the inputs on the exact model, and check which cables are included. If you’re experiencing latency, also check your interface and DAW monitoring settings. | I want to record my guitar through the interface and hear it clearly while I play. Around 29% of consumers prioritise connections and the monitoring setup. |
| Assessing the sound | Only compare frequency limits when they’re measured on the same basis. Yamaha specifies 70 Hz at −10 dB for the HS3; Genelec specifies 67 Hz at −6 dB for the 8010A. These figures aren’t directly comparable. Also check whether tone or placement controls are available. | When I assess guitar alongside other tracks, I want to understand how the setup and measurement basis affect my choice. Around 21% of consumers prioritise the mix balance. |
| Complete stereo set | Check whether the offer includes one monitor or a pair, which cables and power supplies are included, and what the sales and warranty terms are. | I want to know in advance what I’ll need for a usable stereo setup and who to contact if something goes wrong. Around 14% of consumers prioritise a complete set and after-sales support. |
A package may contain one speaker or a pair. Yamaha lists the HS3 as a pair; Genelec lists one 8010A monitor per package.
Check how many units are included in the exact offer before comparing stereo sets.
You’ll need two individually packaged Genelec 8010A monitors for stereo. Also check which connection cables will work with your setup.
The stated lower limits don’t always use the same dB reference. What you hear at your listening position is also affected by the room and monitor placement.
Check the measurement basis for the frequency response, and consider whether you can position the pair suitably on your desk.
ADAM Audio describes USB-C on the D3V as a connection for playback from a computer; this doesn’t mean USB-C is an input for recording guitar. Focusrite explains that on the Scarlett and Saffire interfaces mentioned, monitoring directly and through the DAW at the same time can make the same signal audible twice.
Check the recording input, playback output and monitoring setup separately. Only follow model-specific instructions if they apply to your interface.
The HS3 is a compact active stereo pair with several analogue connection options and placement controls.
According to ADAM Audio, the D3V combines computer playback via USB-C with balanced analogue inputs and removable stands.
The Eris 3.5 2nd Gen is a compact model sold as a pair, with analogue connection options.
The 8010A is a single active monitor for setups with limited space, with an analogue XLR connection.
The original iLoud Micro Monitor system is a compact pair with RCA and stereo mini-jack inputs and a desktop setting.
Position both monitors at the same height and as symmetrically as possible, angled towards your listening position. Genelec recommends an ideal 60° angle between the monitors for music production; this is positioning advice, not a guarantee that the setup will fit every desk.
Not necessarily. Focusrite explains that on the Scarlett and Saffire interfaces mentioned, monitoring directly and through the DAW at the same time can make the same signal audible twice. Check the monitoring setup on your interface and recording software; this model-specific guidance doesn’t automatically apply to every interface.
Check whether the offer includes one monitor or a pair, and which cables are included. For a consumer purchase from a business in the Netherlands, statutory protection applies without a fixed statutory warranty period; the seller is your point of contact if a product is faulty. For a typical online purchase, you’ll usually have 14 days to change your mind.
Electrical equipment covered by the EU Low Voltage Directive must meet electrical safety requirements, including CE marking. The directive covers equipment designed for 50–1,000 V AC or 75–1,500 V DC. Check the specifications and conformity information for the monitor actually being offered and any mains power supply; a product specification alone doesn’t prove that a specific offer is compliant.