Mixers comparing recital recordings
You want to assess the balance between vocals and instruments, the stereo image and subtle differences between reference recordings. A fixed, well-set-up listening position can help.
Start with a stereo pair that you can position symmetrically and connect to your audio source. Then compare the bass response and any room-tuning options. A compact monitor takes up less desk space, but requires extra care when judging deep bass. Room correction also doesn’t replace assessing your monitor placement and room acoustics.
You want to assess the balance between vocals and instruments, the stereo image and subtle differences between reference recordings. A fixed, well-set-up listening position can help.
You need to position two monitors symmetrically at your workstation, balancing cabinet size against your ability to assess bass.
You want to assess the effect of the room and are considering manual sound settings or a compatible measurement system.
First, check that you can position two monitors symmetrically at your workstation and connect them to your audio source. Then consider which bass response and tuning options, if any, suit your mixing work.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Subtle detail and stereo image | Listen from your intended position using recordings you know, and check that both monitors can be positioned equally. Genelec recommends angling the monitors towards your listening position, ideally in an equilateral triangle. | If I want to compare subtle differences in balance, I need a stable stereo image from my listening position. Comparing these nuances is the main concern for around 36% of consumers. |
| Positioning and room effects | Measure the space available for both cabinets and consider their position relative to nearby surfaces. Genelec notes that the room affects what you hear; calibration won’t necessarily solve every acoustic problem. | When space is limited, I want to know whether two monitors can be positioned symmetrically and used effectively. Positioning and room effects are the main concern for around 29% of consumers. |
| Bass response | Compare frequency limits only when they use the same measurement conditions. Genelec specifies 67 Hz at −6 dB for the 8010A; ADAM Audio specifies 45 Hz at −6 dB for the T5V. These are manufacturer figures, not measurements taken in your room. | If I want to assess the weight of lower instrument notes, I consider both the measurement conditions and what I hear from my listening position. Bass response is the main buying concern for around 21% of consumers. |
| Connections and stereo pair | Check that you have two audio channels, suitable cables and the contents of the exact offer. Genelec lists one analogue XLR input per 8010A; Yamaha lists XLR and TRS inputs for the HS5 and states that it is packaged individually. | I want to connect two active monitors and not assume that a single offer includes a pair. Suitable connections and a complete stereo set are the main concern for around 14% of consumers. |
Manufacturers specify frequency limits at different dB levels, and the room affects what you hear from your listening position. Figures based on different measurement conditions can’t be compared directly.
Check the dB condition for each frequency limit and assess the finished setup from your listening position.
Yamaha states that the HS5 is packaged individually. One monitor doesn’t make a stereo pair.
Before buying, check how many speakers the exact offer includes and whether you have two suitable audio channels and connections.
Genelec cautions that calibration may not solve every acoustic problem. Neumann MA 1 also requires a specific measurement microphone and a suitable audio interface.
Assess the positioning and room acoustics first. Then check that the necessary equipment and connections are suitable for your chosen tuning method.
The 8010A is a very compact active monitor for a tight stereo setup.
The HS5 is an active nearfield monitor with analogue connections and manual sound settings.
The T5V is an active nearfield monitor with a specified bass range and a rear-facing bass reflex port to bear in mind when positioning it.
The 305P MkII offers analogue connections and adjustment options for a nearfield setup.
The KH 80 DSP is a compact DSP nearfield monitor for anyone interested in optional measurement-based tuning.
Angle both monitors towards your listening position. Genelec describes an equilateral triangle as the ideal stereo setup. Also consider the effect of nearby surfaces and your listening position, as the room changes what you hear.
No, an active monitor has a built-in amplifier. You’ll still need a suitable audio source and connection.
Not necessarily. Genelec says that calibration may not solve every acoustic problem. Neumann MA 1 also has specific requirements for the measurement microphone and audio interface.
According to the Dutch government, electrical and electronic products must comply with the relevant European rules. Where conformity has been demonstrated, the manufacturer must, among other things, apply the required CE marking and draw up an EU declaration of conformity. CE marking is not proof of audio quality.
According to Dutch government information, consumers are entitled to a product that is fit for purpose. If a product is faulty, it may need to be repaired or replaced; if the issue isn’t resolved properly, you may be entitled to a refund. This is different from an additional guarantee offered by the manufacturer.