Who is this buying guide for?

Mixer with a small workspace

You want to assess a stereo mix before a portfolio review and need space to position two monitors symmetrically on a limited desk.

Mixer checking the balance between instruments

You want to assess vocals, acoustic instruments and the lower frequencies, and can make room for larger nearfield monitors.

Mixer without suitable space for speakers

You can't create a reliable, symmetrical speaker setup or need to work quietly, so you're considering headphones as your main listening option.

What should you look for when buying?

Compact active nearfield monitors

Choose this option: if you can position two monitors symmetrically in your small workspace.

Bear in mind: check the bass on another listening system too. A compact cabinet alone doesn't tell you how the mix will sound on other systems.

Larger active nearfield monitors

Choose this option: if you have enough room for a symmetrical setup and want to assess the lower range of instruments more closely.

Bear in mind: a lower quoted frequency figure doesn't guarantee the same response at your listening position. Also consider where any bass reflex port is positioned.

Headphones as a listening option

Choose this option: if you can't position two speakers properly or need to work quietly.

Bear in mind: headphones and speakers don't serve exactly the same listening purpose. Where possible, check the mix on other playback systems too.

When mixing an acoustic recital, your main buying considerations are the listening setup, the bass range you want, the space available and the connections.

Consideration What to look for when buying Who is this important to?
Stereo image and room Measure up to see whether you can place two monitors at equal distances and heights from your listening position, angled towards you. I want to listen to the left and right channels under similar conditions so I can assess where the vocals and instruments sit. That's why around 33% of consumers prioritise good stereo positioning.
Low frequencies Only compare frequency ranges that use the same dB definition, and bear in mind the effect of the room and speaker placement. If I want to assess the lower notes of instruments in the recital mix, I look at the quoted range as well as what my listening space allows. Around 27% of consumers prioritise bass response.
Space and volume Measure the space available for two monitors and decide whether you can realistically listen on speakers there. I can't position a pair of speakers properly or need to work quietly, so I want to know whether headphones would be more practical. Around 20% of consumers prioritise space or quiet working.
Connections and complete setup Check how many speakers are included, what inputs the monitors have and what outputs your audio interface provides. I want to avoid buying a monitor that isn't compatible with my interface or doesn't give me a stereo pair. Around 20% of consumers prioritise connections and the complete setup.

Buying pitfalls

  • Assuming the price of one active monitor is for a stereo pair

    With a single speaker, you can't assess the left-to-right stereo image as you can with a pair. The Genelec 8010A and Yamaha HS5 are sold individually.

    Before buying, check how many speakers are included, what accessories come with them and which connections you'll need.

    You may need to buy a second speaker for a stereo pair, as well as suitable connection cables.

  • Assuming a lower quoted Hz figure guarantees better audible bass

    Frequency ranges may be quoted using different dB definitions, and the room also affects what you hear at your listening position.

    Compare specifications using the same measurement basis and assess the placement before making extra quoted bass range the deciding factor.

  • Assuming room correction can replace good placement

    Adjustment settings don't necessarily remove reflections or differences between the left and right sides.

    First plan a symmetrical listening position, then use the settings to fine-tune your setup.

    Adjusting your listening position and speaker placement may take extra time.

Brands to compare

The models listed are examples of different cabinet sizes and adjustment options. The brand names alone don't tell you whether a monitor is right for your room.

Genelec

The 8010A is a compact active nearfield monitor for workspaces where room is limited.

  • According to Genelec, the 8010A measures 195 × 121 × 115 mm and has an analogue XLR input.
  • Its quoted range starts at 67 Hz at −6 dB. One speaker is included, so you'll need two for stereo. These are manufacturer specifications, not the result of an independent listening test.

Yamaha

The HS series includes active nearfield monitors in different cabinet sizes. The HS5 and HS7 are examples worth comparing.

  • Yamaha lists Room Control, High Trim and XLR/TRS inputs for both models.
  • The manufacturer quotes a lower limit of 54 Hz at −10 dB for the HS5 and 43 Hz at −10 dB for the HS7. Both are sold individually; the quoted figures don't directly predict how they'll sound in your room.

ADAM Audio

The T7V is a larger active nearfield option for anyone with enough room to position it.

  • ADAM Audio quotes a range starting at 39 Hz at −6 dB for the T7V.
  • The bass reflex port is at the rear. Consider its position in relation to the room; the quoted specification doesn't guarantee a particular response at your listening position.

Kali Audio

The LP-6 V2 and LP-8 V2 offer two cabinet sizes to compare if you want to take space and tuning into account.

  • Kali publishes its own specifications and measurement data for the LP series.
  • The manufacturer's claims about accuracy or rankings aren't an independent assessment of how suitable a model is for this recital mix.

KRK

The ROKIT 5 Generation Five is an active 5-inch option with built-in listening modes and tuning settings.

  • KRK lists Mix, Focus and Create modes, plus 25 combinations of boundary and EQ tuning.
  • The manufacturer sells this model individually. Its settings won't necessarily fix room problems.

Joybuy products

Related products coming soon.

Frequently asked questions

You need two speakers to assess left-to-right positioning. Check how many are in the box: Yamaha lists one HS5 per package, and Genelec lists one 8010A per package.

How should I position a pair of studio monitors?

Genelec recommends a symmetrical setup, with both speakers at equal distances from the listening position and angled towards you. Also consider the effect of the room and nearby surfaces. This is the manufacturer's placement advice, not a legal requirement.

Can I connect a studio monitor directly to my audio interface?

That depends on your interface outputs, the monitor inputs and the cables you need. According to the manufacturer, the Genelec 8010A has an analogue XLR input; Yamaha lists XLR and TRS for the HS5. Check the connections on your own interface before buying.

What should I do if a monitor turns out to be faulty after purchase?

When you buy as a consumer in the Netherlands, a product must meet what you could reasonably expect from it. ACM ConsuWijzer explains that, under the statutory conditions, the seller must put a faulty product right free of charge. This could mean repairing or replacing it, or giving you a refund. A manufacturer's guarantee doesn't replace this statutory right.

Does an active studio monitor sold in the Netherlands need CE marking?

That depends on the product's design and the EU rules that apply to the specific model. EU rules for low-voltage equipment apply to equipment with a rated voltage of 50–1,000 V AC or 75–1,500 V DC. Check the model's documentation; CE marking isn't an independent assessment of sound quality.